The stunning NEW ‘Master Reference SE' shares the same benefits of quality material, construction and termination as 'The Maestro', but now the cable is triple screened; here, the Monocrystal™-Cu signal and return conductors, in a twisted pair topology, are further protected from EMI/ESI/RFI noise ingress by both a Copper/Mylar 100% shield and Monocrystal™ Cu close-lapped braid screens. In addition, modulation effects due to microphony are all but eliminated by cotton fibre filler and the soft PVC outer jacket- and then, to ensure an extremely uniform, refined and dense microstructure with vastly improved mechanical properties, the cable is then deep - cryogenically treated. (DCT).
What does Deep Cryogenically Treated mean?
DCT treatment is the process of cryogenically cooling a material over a measured period of time. The process is described in these terms since typically temperatures approaching - 200C are achieved, and this occurs over a period extending to days rather than minutes or hours. All stages of the process, from the initial slow cooling to the prolonged soak at minimum temperature, through to a carefully staged return to ambient temperature are achieved with precision measurement, and computer control.
Specifically, for non-ferrous metals (such as Monocrystal™ copper and silver)- 'Sub zero treatment of the material at these temperatures results in reduced residual stresses in both conductor and dielectric. Deep cryogenic treatment at temperatures of -185'C further enhances the materials properties. By slowing down atomic movement, the internal molecular bonding energy is increased which promotes a pure structural balance throughout the mass of the material. The end result being a material with an extremely uniform, refined and dense microstructure with vastly improved properties.
Balanced or pseudo-balanced?
The Master Reference SE differs from The Maestro Interconnect in so far as the two paths for the signal are electrically identical with a separate screen. This topology is called 'symmetrical; Wired in a 'pseudo-balanced' fashion (with the screen connected at one end only to drain unwanted 'noise' (R.F.I.) it is terminated with our deep silver-plated (for faster, smoother transmission) non-compressing all- Monocrystal™ copper MACH2XS RCA plugs. The MACH2XS offers all the benefits of our super awesome MACH3 RCAs but without the cost involved.
For 'fully- balanced' systems 'The Master Reference' may be specified with our Audiophile-Reference quality all-Monocrystal™ copper XLR plugs. This interconnect, due to its construction, is directional and an arrow on the sleeve indicates the appropriate direction.
It is equally at home between pre and power amp, between CD and pre amp or as tone -arm cable. The Master Reference exhibits vanishingly low noise and while eminently suitable for all line-level equipment, its low noise performance makes it positively shine between turntable and phono stage. In the right set up, where your system has the ability to resolve ever the finest levels of detail, it will outperform ALL its predecessors.
Ecosse sincerely recommend you match this cable from one of there Monocrystal™ 'speaker' range for the ultimate audio experience; try it with there MS4.45 pre-terminated biwire combination or better still one of there new SuperMonocrystal™ types.
A word about there unique terminations.
The terminations at the ends of cables are part of the transmission path and therefore vital to it. They must not impede the delicate audio signal as inappropriate termination on the cable changes the so called characteristic impudence (and other electrical attributes) of the cable. The signal can be severely compromised by poor, compressing RCA plugs that grip the cable with a grub screw or a collett action. The cable loses it's integrity and the impedance can drop to somewhere in the region of 35 Ohms resulting in reflections and deletions.
To maintain the quality of the all-important interface between interconnect and component and compatibility between wire material and plug, when used in pseudo-balanced connection, Ecosse has developed our unique and non-compressing constant impedance MACH2XS RCA plug.(link) This high quality RCA plug consists of a centre pin and conjugate bracket shield* which together offer going and return paths for the audio signal. To maintain continuity and optimum conductivity, these contact points are made from deep silver plated Monocrystal™ copper - same as the conductor wire itself (others use 'flash-gold' OFC plating which is a very thin coating that wears away very quickly and soon looks tarnished!). The plug casing is precision machined from highest quality copper alloy and is deep-plated. This thick casing offers further shielding - effectively a second 'Faraday Cage' - and reduces the ingress and radiation of EMI, ESI and RFI 'noise' even further, to virtually zero. The interface of shield* and casing is one of high mechanical impedance, dissipating energy and rendering microphonic effects negligible. The full assembly represents Ecosse's Audiophile Grade RCA termination for smaller diameter cables and we believe the Ecosse MACH2XS RCA to be the best available price wise.
These shells are designed to perform a 5-fold function:
They provide a terminal to which the return/screen conductors can be firmly crimped and soldered.
They incorporate tiny teeth that grip the cable firmly and evenly around its circumference without compressing the cable and thereby maintain the cable's characteristic impedance right up to the solder joint.
When assembled, they form a Faraday cage, screening the signal right up to and including the RCA socket.
They form a union of high mechanical impedance with the outer casing, dissipating energy and therefore rendering the plug immune to the effects of microphony.
They firmly locate and clamp the centre pin's polypropylene dielectric, which, in conjunction with the outer casing, results in a strong, stable and extremely durable structure.
FREE CABLE BURN-IN SERVICE OPTION USING THE NORDOST VIDAR MACHINE WHEN YOU PURCHASE THIS CABLE FROM FUTURESHOP.CO.UK
- Ecosse The Master Reference 2.0 DCT, 2 RCA to 2 RCA Audio Cable
- Length: 1.5m
- Monocrystal™copper conductors
- Monocrystal™ copper braid screen
- Copper-Mylar shielding for 100% environmental protection/rejection
- Superior ultra low-loss FPE dielectric
- Copper-Mylar shielding for 100% environmental protection/rejection
- MACH2XS RCA with deep silver-plated Monocrystal™ Copper pin and bracket shells
- Close tolerance Monocrystal™ MACH3 XLR plug with silver-plated pins
- Vibration absorbing low-density PVC sheath
- Supersolder™ - our new ultra high purity silver and tin alloy solid wire-used in conjunction with our unique, passive organic flux. Together these ensure a joint with ultra low chemical contaminants and very high strength
- 10 Year Warranty
We are pleased to offer a free cable burn-in service for this cable when purchased through us. The Nordost VIDAR cable burn-in machine combines three different functions all in one operation:
- It neutralises charges that build up around the cables and the insulation
- It provides a very wide band and deep conditioning into the conductor core, which produces changes in the way signals pass through the metal.
- It ultrasonically conditions the surface of the conductors.
The VIDAR uses a proprietary combination of composite and complex signals to condition the cables. Parts of the signal oscillate at ultra-low frequencies, while other parts are in ultra-high ranges which extend beyond the range of video frequencies. The signal bounces in a ping-ping ball-like fashion from one end of the cable to the other. During the burn-in process, ultra-low frequencies penetrate deep into the core of the cable. The ultra-high frequencies zip along the surface. This method of signal transmission a set up beat harmonics, or heterodynes, between the two complex waveforms. In the digital domain, this would be referred to as aliasing products. These beat frequencies penetrate all layers of the cable.
The design of the circuitry also has a unique feature which drives electrons above the conductor into the dielectric (or insulation) area. The VIDAR not only sends ping pong signals along the cable, it also sends a similar signal from the centre core to the outer shield in the case of interconnect cables. This function neutralises the electrical charges discussed above.
So what does that all mean to me?
The end result of conditioning cables with the Nordost VIDAR is improved sound staging, increased detail, and an overall more musical presentation.
READ MORE ABOUT THE NORDOST VIDAR CABLE TREATMENT
About Ecosse Cable
Ecosse is the name on the worlds finest cables. In terms of price versus performance, musicality and fidelity, Ecosse Cables are without peer.
All Ecosse Cables are painstakingly researched and developed - then hyper evaluated to destruction on the very best 2-channel music system used by ANY cable company in the UK.
Ecosse are proud to have introduced single crystal grain free Monocrystal™ copper (and silver) to the mainstream UK audiophile market back in 1997 and we continued this tradition with our unique Super Monocrystal™ loudspeaker cables in the mid 2000s.
Ecosse Cables are handcrafted in our factory in Scotland by the finest technicians who between them have decades of experience in cable termination. It should come as no surprise then that since the year 2000 Ecosse Cables are the most celebrated cable company in terms of awards, reviews and reputation in the UK.