Future Shop, Cable Specialists for Hi-Fi, Home Cinema, Audio and Video, including HDMI Cables, Scart Leads, DVI, Chord, QED, Gefen and IXOS Cables

The SNOWTRACK has been especially designed for loudspeaker bi-wiring and for car hi-fi applications. This loudspeaker cable consists of 4 identical conductors with in each lead 98 strands of 0.16 mm. diameter.

The conductor material is a very high grade large crystal OFC with a dense pure silver coating. The total cross-section area per conductor is 1.97 mm; close to AWG 14. The resistance of each conductor is 0.88 Ohm/100 meter. The external dimensions are 14.4 x 3.4 mm.

The jacket is made of white HULLIFLEX ® 3, a superior insulation material exhibiting a very good mechanical protection and a high chemical stability. Polarity determination is rather simple: The four conductors have different insulator shapes. Furthermore, one set has two cuts and one set has only one cut with also a flat surface where the type printing is made on the flat surface side. Printing at 25 cm. (10") distance allows easy cutting of lengths.

We advise to use the two inner conductors as the minus-leads and the two outer conductors as the plus-leads.

Specifications

• Cable Type: Quadruple conductor


• Conductor Material: High purity dense Silver coated high purity OFC


• Design Purpose / Application Area(s): Loudspeaker bi-wiring cable / Car and general hi-fi applications


• Eff. Conductor Ø/Eq. AWG No./Strands: 4x(1.97 mm_ / ~AWG 14 / 98)


• External Diameter / Dimensions: 14.4 mm wide; 3.4 mm thick


• Resistance 20 °C / 68 °F: 0.88 Ohm/100 m


• Capacitance: ~45 pF/m


• Insulation / Dielectric Strength / Test Voltage: Jacket: HULLIFLEX ® 3 / 300 Vrms min


• Connector Types Suitable: When combining leads into pairs (e.g. as twin lead speaker cable or at amplifier side of bi-wiring cable): Our 4.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors


• For termination of individual leads: Our 3.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors or our DIY Screw-On Speaker Connectors; Both custom mountable on any length ordered


• Standard Sales Units / Lengths: 100 m. reels; With connectors mounted to specifications: any length or without connectors

With connectors mounted the cable is also available in stereo pairs (i.e. two separate cables) in the following standard configurations:

• Bi-amping configuration: Each of both cables having 4 connectors at the amplifier side and 4 connectors at the speaker side


• Bi-wiring configuration: Each of both cables having 2 connectors at the amplifier side and 4 connectors at the speaker side


• Normal wiring configuration: Each of both cables having 2 connectors at the amplifier side and 2 connectors at the speaker side


• Jacket Colours Available: White


• Remarks: Is a quadruple lead / bi-wiring version of The SNOWLINE. Our CS - 14 is a single lead version of this cable