Hi-Fi Isolation
Hi-Fi Isolation
VIEWStillpoints Rail Grid for ESS RackItem Code: Stillpoints Rail GridThe Rail Grid was designed by Stillpoints to offer an improvement upon the existing Acrylic Shelf and X Grid - offering greater isolation than the acrylic version and far greater flexibility than the X Grid - the two Stillpoints fitted on each rail can be adjusted along the entire length of the rail, and the Rail Grid can easily replace any existing ESS Rack shelves. Isolation feet NOT included.
VIEWAudioQuest Fog Lifters Cable-Uppers (pack of 8)Item Code: FOGLIFTERS8Fog Lifters significantly reduce RF coupling, whether with the floor, or due to misdirected efforts to isolate cable with stands or clamps that themselves have too much mass and are sources of RF Noise. A few inches or centimeters might not seem important, but as with light coming from a bulb, the energy falls off exponentially. A few inches or centimeters makes a big difference—which translates into a lower noise-floor and less compromise to, and distortion in, attached active circuits.
VIEWTownshend Seismic Isolation Corner Pack of 4Item Code: Seismic CornerSeismic Sink Corners provide vibration isolation for almost any equipment rack, stand, platforms or speaker. Each Corner is a small platform suspended from two Seismic Load Cells™ on which the equipment legs or spikes are placed.
VIEWHIFISTAY Sound Wings Cable Lifter (Set of 2/4)Item Code: Sound WingsHIFISTAY's Sound Wings are developed to reduce external vibrations from affecting the signals passing through your cables by rasing them up off the floor and applying their swing technology to dissipate any incoming vibrations. The Sound Wings feature 2/3 levels of vibration control, starting with a 2-layer ceramic ball swing system in the base, a single or double silicon band connecting the two isolated poles, and lastly an optional aluminium pedestal to help fix your cables in place with a sturdier platform.
VIEWIsoAcoustics Aperta Sub XL Subwoofer StandItem Code: 11001518The Aperta Sub XL decouples the subwoofers from the supporting surface to prevent the physical transfer of energy that excites the supporting surface, causes room rattle and disturbs your neighbours.
VIEWNordost QSINE QRT - AC Enhancer Plug-InItem Code: Nordost QSINE EnhancerIf you're looking to improve the quality of your sound system, the Nordost QSINE Enhancer is an ideal buy. This plug-in provides a unique solution that helps to reduce EMI noise and improve the audio/video performance of two-channel and home entertainment systems.
VIEWNordost QWAVE QRT – AC Line Harmoniser Plug-InItem Code: Nordost QWAVE HarmoniserIf you're looking to improve the quality of your sound system, the Nordost QWAVE Harmoniser is an ideal buy. This plug-in manipulates the sine wave by introducing a precise range of pulsed frequencies onto the AC line, clocked from the original 50 or 60 Hz waveform. As a result you will notice increased imagery and dimensionality to your sound and a more dimensional and vibrant picture from your AV system.
VIEWIsoAcoustics Aperta Sub Subwoofer StandItem Code: 11001517The Aperta Sub decouples the subwoofers from the supporting surface to prevent the physical transfer of energy that excites the supporting surface, causes room rattle and disturbs your neighbours.









