Audio Extenders
Shop by Brand
-
£117.50Ex. VATBlustreams CAT100AU Audio over CAT 5/6 extender kit transmits audio signals up to a distance of 300m (192kHz signals up to 100m). Product Code - CAT100AU -
£870.00Ex. VAT
The DA1414 is a PoE+ powered audio matrix supporting 14 channels with Dante, analog, and USB I/O. It offers full signal routing, onboard EQ, and third-party API control for flexible multi-zone setups. Ideal for commercial or residential use.
-
£394.17Ex. VATThe Blustream DA22XLR-WP Line / MIC 2+2 XLR Dante Audio Wall Plate is an ideal choice for those looking to integrate analogue audio into a digital Dante networked audio system. This versatile wall plate features two input channels of balanced/unbalanced/MIC audio with switchable 48v phantom power, and two output channels of balanced/unbalanced audio.
-
£63.33Ex. VATBlustream's PAC500AU Audio over CAT cable extender transmits analogue audio signals up to distance of 500m. This plug and play device requires no power supply making it ideal for simple installations in which analogue audio needs to be extended over long distances
-
£290.82Ex. VATThe CYP AU-DTI4-TX is a four channel analogue audio to Dante transmitter that converts balanced mono inputs into networked digital audio for distribution over standard Ethernet. High quality analogue to digital conversion, adjustable pre-gain and switchable phantom power make it ideal for sending microphone and line level sources around large installations with very low latency. Powered entirely over PoE, it integrates cleanly into any Dante audio network and removes the need for heavy multi-core analogue cabling. -
NEW£526.93Ex. VATThe CYP AU-DTM1 is a Dante Euromodule wall plate combining a high-quality integrated microphone and a stereo line output in a single transceiver. It sends and receives audio simultaneously over standard Cat.5e/6/7 cable at distances up to 100 metres, with typical latency of around 1ms. Power comes from PoE over the same cable, and the unit is AES67 compatible for use in wider networked audio systems. -
£290.82Ex. VATThe CYP AU-DTO4-RX is a Dante network audio receiver that converts a single Dante input into four channels of balanced mono analogue audio over four 3-pin Phoenix outputs. Featuring high quality DAC conversion with very low latency, AES67 compatibility and configurable volume and muting, it lets installers route uncompressed digital audio across standard Ethernet networks instead of running heavy multi-core analogue cabling. Powered directly by PoE to the IEEE 802.3af standard, it draws everything it needs from the network switch for flexible, single-cable installation.
-
£85.82Ex. VATIt can extend Component or RGBHV signals through CAT-5 Cables up to a distance of 100m - will require a receiver unit (CA-COMP50R or CA-COMP100R). Product Code - CA-COMP-AT. -
£114.99Ex. VATCA-COMP100R can receive Component or RGBHV signals through CAT-5 Cables up to a distance of 100m - will require a transmitter unit (CA-COMPAT). Product Code - CA-COMP-100R. -
£146.66Ex. VATThe PU-304-KIT is designed to send digital audio signals over 150m over CAT5e/6 cable infrastructure. Product Code - PU-304-KIT. -
£134.16Ex. VATThe PU-305BDA-RX is an analogue Stereo over CAT5e/6/7 Receiver which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. Product Code - PU-305BDA-RX. -
CYP
CYP PU-305BDA-TX Bi-Directional Analogue Audio over Single CAT TransmitterSKU: CYP PU-305BDA-TX
£134.16Ex. VATThe PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. Product Code - PU-305BDA-TX.
