Speaker Isolation
Speaker Isolation
- VIEWIsoAcoustics Gaia Series Threaded Isolation FeetItem Code: Gaia
These multi-award-winning isolators by IsoAcoustics could be a significant step in unlocking the true potential of your setup. With three different models to cover a range of weights, as well as a handy calculator on their website (see below), these isolators will boost clarity and widen your sound stage.
- VIEWIsoAcoustics Gaia-Titan Series Threaded Isolation FeetItem Code: Gaia-Titan
The GAIA isolators are machined stainless steel units that incorporate IsoAcoustics’ patented design to provide a high degree of speaker isolation, while resisting lateral movement and oscillations, to maintain accuracy and alignment with the listening position. Internal reflections from the hard supporting surface are attenuated resulting in greater sound clarity and openness.
- VIEWIsoAcoustics Aperta Bookshelf Speaker StandsItem Code: Aperta
The patented IsoAcoustics isolation stand Aperta, which means ‘open’ in Italian, allows for the full three-dimensional soundstage in your music. Speakers float, eliminating reflections from being conducted back into the structure that creates bass smear and resulting in a lack of clarity and openness.
- VIEWIsoAcoustics Aperta Support PlateItem Code: Aperta Plate
IsoAcoustics engineered a support plate the for Aperta 155 and Aperta 200 bookshelf speaker stands which extend the surface area of your current floor stand or supporting structure to accommodate the Aperta. Double-sided tape is provided to fasten the support plate in place. With this support plate, you can use the brilliance of the Aperta isolation with most existing bookshelf speaker stands. The dimensions for this plate are: 170mm (w) x 210mm (d)
- VIEWIsoAcoustics Gaia Carpet Discs (Set of 4)Item Code: Gaia Carpet Discs
Designed to maintain stable support on your carpet, the optional Carpet Spikes work with the GAIA isolators to provide improved performance on thicker pile carpet and carpet with underpads.
- VIEWIsoAcoustics Gaia B&W Plate Adaptor (Pack of 4)Item Code: Gaia B&W Adaptor
The B&W plate adapts the GAIA I to the Bowers & Wilkins Nautilus and Diamond series speakers. The ball-casters are removed and replaced with the B&W plate which provides a threaded hole for the appropriate stud to screw into.
- VIEWIsoAcoustics Gaia B&W D3 Plate Adaptor (set of 4)Item Code: Gaia B&W D3 Adaptor
The B&W D3 plate adaptor replaces the wheels on B&W D3 speakers and provides a threaded hole for the appropriate GAIA stud to screw into.
- VIEWStillpoints Ultra SS V2 Isolation Feet (Pack of 3/4)Item Code: Stillpoints Ultra SS V2The Ultra SS V2 represents a step up in performance from Stillpoints' Ultra Mini, and is rated for use with floorstanding speakers as well as providing excellent isolation for any of your components. For use with a speaker on thick carpets, you will require the Bullet Spike option (just choose the quantity that matches the quantity of Ultra SS you have selected!).
- VIEWStillpoints Ultra SS Bullet Spike (Individual)Item Code: Stillpoints Ultra SS Bullet SpikeThe Ultra SS Bullet Spike is designed for use with the Ultra SS V2 for those with deep thick carpet. Do keep in mind that’s it’s difficult to tune the alignment of a loudspeaker within a 1/16” once the spikes have been fitted! Sold singly.
- VIEWStillpoints Ultra Base for Ultra SS V2, Ultra II V2, Ultra 5 V2Item Code: Stillpoints Ultra BaseThe Ultra Base can be connected to the Ultra SS V2, Ultra II V2, Ultra 5 V2, and directly to any component in a system. One 1/4-20 x 5/8″ set screw is included with each Ultra Base. The 1/4-20 adapter listed below allows connection of the Ultra Base to the beveled lower section of the Ultra 5. The added height will provide more ventilation space under an amplifier if needed. The Ultra Base can also spread the mass of whatever is being supported over a larger area adding stability in some applications. Adding the Ultra Base to any Stillpoint can increase the performance of that Stillpoint significantly. Sold singly.
- VIEWStillpoints Ultra 5 V2 Isolation Feet (Individual)Item Code: Stillpoints Ultra 5 V2The Ultra 5 V2 isolation feet approach the higher end of performance achieved by any Stillpoints products. Designed for use with components or floorstanding speakers, the Ultra 5 V2 contains four "technology pockets" in each unit and can be used without the Ultra Base on a perfectly level floor. The beveled base aids the adjustment of speakers once they have been fitted. Sold singly.
- VIEWStillpoints Ultra 7 V2 Isolation Feet (Individual)Item Code: Stillpoints Ultra 7 V2The Ultra 7 V2 are the flagship isolation feet, representing the pinnacle of performance that can be achieved by any Stillpoints product designed to isolate floorstanding speakers. These isolation feet are available to the public after being developed with the manufacturers of high-end loudspeakers, and do not require the use of any Ultra Base or Ultra Bullets.
- VIEWTownshend Seismic Isolation Pod IndividualItem Code: Seismic PodsPositioned under any piece of equipment, Seismic Isolation Pods will dramatically improve the sound by breaking the acoustic connection between the audio system and structural vibrations in the room.
- VIEWTownshend Seismic Isolation Corner Pack of 4Item Code: Seismic CornerSeismic Sink Corners provide vibration isolation for almost any equipment rack, stand, platforms or speaker. Each Corner is a small platform suspended from two Seismic Load Cells™ on which the equipment legs or spikes are placed.
- VIEWTownshend Seismic Isolation Podium PairItem Code: Seismic PodiumDesigned as a range to accommodate any size and weight of speaker – standmount plus stand, floorstander or subwoofer – the Seismic Podium breaks the acoustic connection between the floor and the speaker, preventing the passage of deleterious vibrations both to and from the speaker cabinets.
- VIEWChord Silent Mount SM7 Stainless Steel Speaker Isolation Mounts 70mm Pack of 4Item Code: Chord SM-7X
4 x 70mm stainless steel spike mounts for speakers and racks. Hand crafted in Japan.
- VIEWChord Silent Mount SM5 Titanium Isolation Rack Mounts 50mm Pack of 4Item Code: Chord SM5 Ti
4 x 50mm titanium spike mounts for lightweight racks and components. Hand crafted in Japan.
- VIEWOehlbach One for All - Pack of 4Item Code: 55135Vibration damper for acoustically insulating smaller loudspeaker boxes.
- VIEWOehlbach Washer 20 - Pack of 4Item Code: Oehlbach Washer 20High-quality washers for subwoofers / boxes with spikes or for combining with Oehlbach spikes. 30 Years Warranty.
- VIEWOehlbach Mini Spike - Pack of 4Item Code: 55136High-quality mini spikes that act as a vibration damper, designed to acoustically insulate smaller loudspeaker boxes. 30 Years Warranty.
- VIEWOehlbach Shock Absorber - Pack of 4Item Code: 55138High-quality vibration damper for acoustically insulating high-end hi-fi and home-cinema components and loudspeaker boxes. 30 Years Warranty.
- VIEWOehlbach Spike S 2000 - Pack of 4Item Code: Oehlbach Spike S 2000High-quality spike set to prevent the undesirable transmission of vibrations from loudspeakers to the surfaces they're standing on. 30 Years Warranty.
- VIEWOehlbach Air Absorb - Pack of 4Item Code: 55045Reliably prevents the transmission of undesirable resonances from loudspeaker cases to the surfaces they´re standing on. 30 Years Warranty.
- VIEWOehlbach Spike Plus - Pack of 4Item Code: Oehlbach Spike PlusHigh-quality spike set to prevent the undesirable transmission of vibrations from loudspeakers to the surfaces they're standing on. 30 Years Warranty.