System Isolation

Vibration control for speakers, components, turntables and cables from IsoAcoustics, Stillpoints and Townshend. One of the least glamorous upgrades and one of the most reliable.

145 products Award Winning Dealer Since 2013 Free expert consultation

The science of vibration control

Every component in a hi-fi system is affected by vibration from two directions at once. Airborne energy from the speakers reaches the equipment through the air and through the floor, and mechanical energy generated inside the equipment itself has to go somewhere.

Two approaches exist and they do different jobs. Isolation decouples a component from what it sits on, so vibration cannot travel between them. Coupling does the opposite, draining energy out of the component into a heavier structure. Speakers generally benefit from isolation from the floor, which breaks the room excitation loop and tightens bass. Turntables benefit most of all, since a stylus in a groove is a vibration sensor by design.

This is the category where the effect is most obvious to people who expected nothing. Putting isolation feet under a pair of standmount speakers changes the bass and the imaging in a way that is easy to demonstrate. Load ratings matter: the product has to be matched to the weight it carries or it will not work as designed. Tell us the component weights and we will specify the right size.

4.95/5 from 20,728+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

36 of 145 products

  • AudioQuest

    AudioQuest Fog Lifters Cable-Uppers (pack of 8)

    SKU: FOGLIFTERS8

    (3 reviews)
    £108.29
    Ex. VAT

    Fog Lifters significantly reduce RF coupling, whether with the floor, or due to misdirected efforts to isolate cable with stands or clamps that themselves have too much mass and are sources of RF Noise. A few inches or centimeters might not seem important, but as with light coming from a bulb, the energy falls off exponentially. A few inches or centimeters makes a big difference—which translates into a lower noise-floor and less compromise to, and distortion in, attached active circuits.

    View Available Worldwide Shipping Available
  • Townshend Audio

    Townshend Seismic Isolation Pod Individual

    SKU: Seismic Pods

    (2 reviews)
    £114.17
    Ex. VAT
    Positioned under any piece of equipment, Seismic Isolation Pods will dramatically improve the sound by breaking the acoustic connection between the audio system and structural vibrations in the room.
    View Available Worldwide Shipping Available
  • Atlas Cables

    Atlas Achromatic RCA Input Terminator AIT x 4

    SKU: Atlas RCA Input Terminator AIT

    (2 reviews)
    £83.33
    Ex. VAT
    Atlas terminators are simple passive products that, by reducing the pathways to noise ingression or transmission, help reduce the noise burden in any system.
    View Available Worldwide Shipping Available
  • Blue Horizon

    Blue Horizon Sanctum Isolation Platform

    SKU: BHA12

    (2 reviews)
    £207.50
    Ex. VAT
    Blue Horizon’s new Sanctum isolation platform is specifically designed to isolate individual high-performance components such as turntables, DACs, preamplifiers, power amplifiers, CD players and streamers from all sources of unwanted vibration.
    View Available Worldwide Shipping Available
  • IsoAcoustics

    IsoAcoustics Gaia B&W Plate Adaptor (Pack of 4)

    SKU: 11001541

    (2 reviews)
    £45.83
    Ex. VAT

    The B&W plate adapts the GAIA I to the Bowers & Wilkins Nautilus and Diamond series speakers. The ball-casters are removed and replaced with the B&W plate which provides a threaded hole for the appropriate stud to screw into.

    View Available Worldwide Shipping Available
  • Oehlbach

    Oehlbach XXL Air Cylinder - Pack of 4

    SKU: Oehlbach XXL Air Cylinder

    (1 reviews)
    £157.50
    Ex. VAT
    These innovative shock absorbers have been designed to effectively insulate sensitive audio equipment from the floor. 30 Years Warranty.
    View Available Worldwide Shipping Available
  • Nordost

    Nordost SORT KUP - Pack of 4

    SKU: SK1-4PK Sort Kup Floor Protectors

    (1 reviews)
    £275.00
    Ex. VAT
    The Nordost SORT KUP are to be place under the Sort Fut to protect sensitive floors from scratches and dents.
    View Available
  • Nordost

    Nordost Sort Kone Isolation Cone

    SKU: Nordost Sort Kone

    (1 reviews)
    From
    £83.33
    Ex. VAT
    The Sort Kone is a directly coupled and mechanically tuned resonance control device, using a sophisticated new approach to the problem of supporting sensitive electronics.

    Note: The AS model usually ships between 10-14 days.
    View Available
  • Chord Company

    Chord Silent Mount SM5 Titanium Isolation Rack Mounts 50mm Pack of 4

    SKU: SMS0003.004.1

    (1 reviews)
    £541.67
    Ex. VAT

    4 x 50mm titanium spike mounts for lightweight racks and components. Hand crafted in Japan.

    View Available Worldwide Shipping Available
  • Furutech

    Furutech NCF Signal-Booster Performance-Enhancing Connector & Cable Holder

    SKU: NCF Signal Booster

    (1 reviews)
    £208.33
    Ex. VAT

    Not only does the Furutech NCF Booster-Signal Connector and Cable Holder lift audio cables off the floor minimizing their points of contact with the floor, reducing electromagnetic interference, it also excels at providing NCF damping support for connectors and cables at points of connection. The NCF Booster-Signal allows for the optimum alignment between connectors and sockets and eliminates static – boosting performance by allowing a more pure and clear signal.

    View Available Worldwide Shipping Available
  • IsoAcoustics

    IsoAcoustics Delos Maple Isolation Platform

    SKU: Delos Maple

    (1 reviews)
    From
    £332.50
    Ex. VAT

    The DELOS butcher block from IsoAcoustics decouples the turntable from the supporting surface and dramatically diminishes structural vibrations and resonances, resulting in greater clarity and detail.

    View Available Worldwide Shipping Available
  • IsoAcoustics

    IsoAcoustics Gaia B&W D3 Plate Adaptor (set of 4)

    SKU: 11001542

    (1 reviews)
    £54.17
    Ex. VAT

    The B&W D3 plate adaptor replaces the wheels on B&W D3 speakers and provides a threaded hole for the appropriate GAIA stud to screw into.

    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

When speakers sit directly on a surface, vibrations travel into the floor or stand and then reflect back into the speaker cabinet. This interference can blur detail, smear imaging, and muddy bass response. IsoAcoustics isolators decouple the speaker from its surface, preventing those reflections. The result is tighter, more controlled bass, cleaner midrange, and a wider, more natural soundstage. Isolation helps you hear the true performance of your speakers without unwanted distortion.

Yes. Isolation platforms prevent vibrations from floors and racks reaching your sensitive audio equipment. By reducing mechanical feedback, they allow your system to perform at its full potential, delivering cleaner detail, more stable imaging, and deeper, more controlled bass. Townshend’s Seismic Platforms are among the most effective solutions available.

Isolation shelves or decoupling features can help reduce resonance, particularly for turntables and valve equipment.

Isolation and support products can make a clearly audible difference, especially in resolving systems. Vibrations from floors, speakers, and even airborne sound can interfere with sensitive components like turntables, DACs, and amplifiers. Proper speaker stands help speakers perform as intended by improving stability, positioning, and bass control.

Hi-fi racks and isolation platforms reduce unwanted resonance, helping systems sound cleaner, more focused, and more consistent. While these products may not change the sound as dramatically as speakers or cartridges, they often unlock performance that is already there but being masked by vibration or poor placement.

Most forms of Isolation aim to reduce the amount of external (and internal) vibration affects your system, whether thats your speakers, turntable, amplifier etc. These vibrations may not seem noticeable to you, however, Hi-Fi equipment can be extremely sensitive and even micro-vibrations can introduce noise to your music. Two great examples are for Speakers and Turntables. If a speaker receives excess vibrations from an external source, this can affect the movement of the drivers and directly affect what you can hear. Similarly with Turntables, any excess vibrations can affect the movement of the cartridge which ultimately means a change in the musical information. All of these situations mean you won't be able to hear your system and your music as it was intended. Even some simple isolation for your most sensitive equipment can go a long way to improving your listening sessions, and the more isolation you introduce, the lower your overall noise floor can be.

Speaker isolation reduces vibration transfer between speakers and floors or furniture, improving clarity and bass control.

Yes. From compact bookshelf speakers to large floorstanders, most speakers benefit from proper isolation.

Loading...
Loading...
loader
Loading...