Hi-Fi Isolation
Hi-Fi Isolation
VIEWIsoAcoustics Aperta Bookshelf Speaker StandsItem Code: ApertaThe patented IsoAcoustics isolation stand Aperta, which means ‘open’ in Italian, allows for the full three-dimensional soundstage in your music. Speakers float, eliminating reflections from being conducted back into the structure that creates bass smear and resulting in a lack of clarity and openness.
VIEWIsoAcoustics Gaia Carpet Discs (Set of 4)Item Code: Gaia Carpet DiscsDesigned to maintain stable support on your carpet, the optional Carpet Spikes work with the GAIA isolators to provide improved performance on thicker pile carpet and carpet with underpads.
VIEWIsoAcoustics Gaia B&W Plate Adaptor (Pack of 4)Item Code: 11001541The B&W plate adapts the GAIA I to the Bowers & Wilkins Nautilus and Diamond series speakers. The ball-casters are removed and replaced with the B&W plate which provides a threaded hole for the appropriate stud to screw into.
VIEWIsoAcoustics Gaia B&W D3 Plate Adaptor (set of 4)Item Code: 11001542The B&W D3 plate adaptor replaces the wheels on B&W D3 speakers and provides a threaded hole for the appropriate GAIA stud to screw into.
VIEWStillpoints Ultra SS Bullet Spike (Individual)Item Code: Stillpoints Ultra SS Bullet SpikeThe Ultra SS Bullet Spike is designed for use with the Ultra SS V2 for those with deep thick carpet. Do keep in mind that’s it’s difficult to tune the alignment of a loudspeaker within a 1/16” once the spikes have been fitted! Sold singly.
VIEWStillpoints Ultra Base for Ultra SS V2, Ultra II V2, Ultra 5 V2Item Code: Stillpoints Ultra BaseThe Ultra Base can be connected to the Ultra SS V2, Ultra II V2, Ultra 5 V2, and directly to any component in a system. One 1/4-20 x 5/8″ set screw is included with each Ultra Base. The 1/4-20 adapter listed below allows connection of the Ultra Base to the beveled lower section of the Ultra 5. The added height will provide more ventilation space under an amplifier if needed. The Ultra Base can also spread the mass of whatever is being supported over a larger area adding stability in some applications. Adding the Ultra Base to any Stillpoint can increase the performance of that Stillpoint significantly. Sold singly.
VIEWStillpoints Ultra 5 V2 Isolation Feet (Individual)Item Code: Stillpoints Ultra 5 V2The Ultra 5 V2 isolation feet approach the higher end of performance achieved by any Stillpoints products. Designed for use with components or floorstanding speakers, the Ultra 5 V2 contains four "technology pockets" in each unit and can be used without the Ultra Base on a perfectly level floor. The beveled base aids the adjustment of speakers once they have been fitted. Sold singly.
VIEWStillpoints Ultra 6 V2 Isolation Feet (Individual)Item Code: Stillpoints Ultra 6 V2The Ultra 6 V2 are Stillpoints' flagship isolation feet for components (not designed for use with floorstanding speakers), containing multiple "technology pockets" to dissipate mechanical vibrations from your equipment and allow it to achieve its full potential. The Ultra 6 V2 is available with the Ultra Base if not being used directly on a Stillpoints ESS rack or component stand.
VIEWStillpoints Rail Grid for ESS RackItem Code: Stillpoints Rail GridThe Rail Grid was designed by Stillpoints to offer an improvement upon the existing Acrylic Shelf and X Grid - offering greater isolation than the acrylic version and far greater flexibility than the X Grid - the two Stillpoints fitted on each rail can be adjusted along the entire length of the rail, and the Rail Grid can easily replace any existing ESS Rack shelves. Isolation feet NOT included.
VIEWAudioQuest USB Input / Output Noise-Stopper Caps (Set of 4)Item Code: CAPUSBTo reduce the amount of RF interference entering your system we recommend "capping" all unused USB Ports.
VIEWAudioQuest RJ45 Noise-Stopper Caps (Set of 4)Item Code: CAPRJ45AQ Noise-Stopper Caps fit over unused RJ45 inputs or outputs, preventing RFI and EMI noise from entering the active circuit. Noise-Stopper Caps also protect against dust and corrosion.
VIEWAudioQuest HDMI Input / Output Noise-Stopper Caps (Set of 4)Item Code: CAPHDMITo reduce the amount of RF interference entering your AV system we recommend "capping" all unused HDMI Ports.









