The Ultra SS Bullet Spike is designed for use with the Ultra SS V2 for those with deep thick carpet. Do keep in mind that’s it’s difficult to tune the alignment of a loudspeaker within a 1/16” once the spikes have been fitted! Sold singly.

The Ultra Base can be connected to the Ultra SS V2, Ultra II V2, Ultra 5 V2, and directly to any component in a system. One 1/4-20 x 5/8″ set screw is included with each Ultra Base. The 1/4-20 adapter listed below allows connection of the Ultra Base to the beveled lower section of the Ultra 5. The added height will provide more ventilation space under an amplifier if needed. The Ultra Base can also spread the mass of whatever is being supported over a larger area adding stability in some applications. Adding the Ultra Base to any Stillpoint can increase the performance of that Stillpoint significantly. Sold singly.

The Ultra 5 V2 isolation feet approach the higher end of performance achieved by any Stillpoints products. Designed for use with components or floorstanding speakers, the Ultra 5 V2 contains four "technology pockets" in each unit and can be used without the Ultra Base on a perfectly level floor. The beveled base aids the adjustment of speakers once they have been fitted. Sold singly.

The Ultra 6 V2 are Stillpoints' flagship isolation feet for components (not designed for use with floorstanding speakers), containing multiple "technology pockets" to dissipate mechanical vibrations from your equipment and allow it to achieve its full potential. The Ultra 6 V2 is available with the Ultra Base if not being used directly on a Stillpoints ESS rack or component stand.

The Ultra 7 V2 are the flagship isolation feet, representing the pinnacle of performance that can be achieved by any Stillpoints product designed to isolate floorstanding speakers. These isolation feet are available to the public after being developed with the manufacturers of high-end loudspeakers, and do not require the use of any Ultra Base or Ultra Bullets.

The Rail Grid was designed by Stillpoints to offer an improvement upon the existing Acrylic Shelf and X Grid - offering greater isolation than the acrylic version and far greater flexibility than the X Grid - the two Stillpoints fitted on each rail can be adjusted along the entire length of the rail, and the Rail Grid can easily replace any existing ESS Rack shelves. Isolation feet NOT included.

Vibration damper for acoustically insulating smaller loudspeaker boxes.

High-quality mini spikes that act as a vibration damper, designed to acoustically insulate smaller loudspeaker boxes. 30 Years Warranty.

High-quality vibration damper for acoustically insulating high-end hi-fi and home-cinema components and loudspeaker boxes. 30 Years Warranty.

The result is a significantly better sound. The XXL® caps have a Teflon coating inside and consist of solid brass with 24 carat gold plating. 30 Years Warranty.

Reliably prevents the transmission of undesirable resonances from loudspeaker cases to the surfaces they´re standing on. 30 Years Warranty.

High-quality spike set to prevent the undesirable transmission of vibrations from loudspeakers to the surfaces they're standing on. 30 Years Warranty.