Hi-Fi Isolation
Hi-Fi Isolation
VIEWiFi Audio DC Blocker - Transformer Hum EliminatorItem Code: P003279If one of your audio components suffers from an irritating transformer hum, then the DC Blocker is the perfect product for you. By intelligently blocking DC voltage greater than 1,000mV (the main cause of humming), the DC Blocker can eliminate the transformer hum in your equipment. The DC Blocker manages this while maintaining equipment safety and EMI shielding to ensure there are no negative side effects. Additionally, the DC Blocker can be used anywhere around the world!
VIEWiFi Audio GND Defender - Ground Loop EliminatorItem Code: P003281If you can hear a consistent hum coming through your speakers, whether playing music or when idle, then you may have multiple ground/earth connections in your system causing a ground loop. This ground loop can be fiddly to fix, however, iFi have come along with an intelligent solution to help solve this issue. Enter the GND Defender! By using a specially designed AI Ground Detection, the GND Defender can automatically disconnect the ground on your device if there is a ground loop, eliminating the low hum through your speakers. But it does not stop there, the GND Defender can even reinstate the ground connection to pass current if any faults are detected in your system. This ensures a safety fallback to help protect your equipment.
VIEWAudioQuest USB Input / Output Noise-Stopper Caps (Set of 4)Item Code: CAPUSBTo reduce the amount of RF interference entering your system we recommend "capping" all unused USB Ports.
VIEWAudioQuest RJ45 Noise-Stopper Caps (Set of 4)Item Code: CAPRJ45AQ Noise-Stopper Caps fit over unused RJ45 inputs or outputs, preventing RFI and EMI noise from entering the active circuit. Noise-Stopper Caps also protect against dust and corrosion.
VIEWAudioQuest Fog Lifters Cable-Uppers (pack of 8)Item Code: FOGLIFTERS8Fog Lifters significantly reduce RF coupling, whether with the floor, or due to misdirected efforts to isolate cable with stands or clamps that themselves have too much mass and are sources of RF Noise. A few inches or centimeters might not seem important, but as with light coming from a bulb, the energy falls off exponentially. A few inches or centimeters makes a big difference—which translates into a lower noise-floor and less compromise to, and distortion in, attached active circuits.
VIEWAudioQuest HDMI Input / Output Noise-Stopper Caps (Set of 4)Item Code: CAPHDMITo reduce the amount of RF interference entering your AV system we recommend "capping" all unused HDMI Ports.
VIEWAudioQuest Sorbothane Self Stick SheetItem Code: SORBOSHEET6X6A Synthetic Visco-Elastic Polymer sheet that can be cut to size to damp anything.
VIEWAudioQuest XLR Input Noise-Stopper Caps (Set of 2)Item Code: 69-094-01To reduce the amount of RF interference entering your system we recommend "capping" all unused XLR inputs.
VIEWAudioQuest XLR Output Noise-Stopper Caps (Set of 2)Item Code: 69-095-01To reduce the amount of RF interference entering your system we recommend "capping" all unused XLR Outputs.
VIEWAudioQuest SorboGel Q Feet (Set of 4)Item Code: SORBOQSETAudioQuest's Q-Feet can breathe new life into your system by damping unwanted vibrations, allowing the system to sing deeper and further into the music.
VIEWiFi Audio Groundhog+ Earth Grounding AdaptorItem Code: P003286If you have identified that you have a Missing/No Earth, then the Groundhog+ is for you. Its sole objective is to put the Ground/Earth back into your system and banish those unwanted, audio pests. No predicting the weather with this hog! All you need to do use a standard IEC power cable to connect the Groundhog+ to your audio system. The Groundhog+ then adds back the missing Ground/Earth connection to dissipate noise.
VIEWiFi Audio DC Blocker+ - Transformer Hum EliminatorItem Code: P003280The iFi Audio DC Blocker+ is an essential device for ensuring the best possible audio quality. By preventing the disruption of AC power from various interferences, it allows your audio system to perform at its best. The DC Blocker+ also eliminates transformer hum, which can be a common issue with amplifiers. The bigger the amplifier, usually, the larger the toroidal transformer — often sensitive to residual DC voltage. Simply add the DC Blocker+ at the IEC to stop DC from getting in.









