Blustream NPA100DA Networked Power Amplifier with Dante®
Usage Guide
Speakers
Subwoofer
TVs
Connection Guide
Toslink Optical
HDMI Standard
Ethernet Plug
RS232
Our Hi-Fi specialists give free, honest advice — no commission, ever. Contact us by email or phone and we'll help you find the right cable for your system.
Item code: NPA100DA
Inc. VAT (20%) · Ex. VAT: £838.88 Ex. VAT · Inc. VAT (20%):
Lowest price in the last 30 days:
Request to Price Match
If you've seen a better offer for this product, we will endeavour to match it. The competing offer must be on brand-new boxed items, and in stock from another UK Online Authorised Retailer (excluding marketplaces). Price match quotations are valid for 7 days.
SPEAKER CABLES:
A quantity of 2 means you will receive a pair of speaker cables e.g. for your front left and front right speakers. By entering a quantity of 1, you will get a cable for a single speaker e.g. centre speaker and this option also enables you to vary the length (and termination) of your cable for each speaker.
OTHER CABLES:
A quantity of 1 means you will receive a single cable in the case of aerial, satellite, subwoofer, digital coaxial & optical cables and a pair of cables in the case of 2 rca to 2 rca analogue audio cables.
NON-CABLE PRODUCTS:
A quantity of 1 means you will receive 1 of the specified products.
Order before 4pm (Mon–Fri) for same-day dispatch
Blustream NPA100DA Networked Power Amplifier with Dante®
The Blustream NPA100DA is a two-channel zone amplifier that takes its audio from a Dante network and drives 4 or 8 ohm speakers at 50W per channel, a single channel at 100W, or a 70V/100V constant-voltage line for several speakers on long cable runs. Alongside its two Dante/AES67 channels it accepts HDMI ARC from a TV with CEC volume control, an optical S/PDIF input, a balanced or unbalanced analogue line input and a microphone input with 48V phantom power and auto-ducking, so a single unit can take TV sound, networked audio and a microphone in one room or zone.
Power comes from a PoE++ switch over the Dante port or from the 36V supply in the box. Blustream's datasheet shows the amplifier output is reduced on PoE, from 55W on a Type 4 Class 8 port down to 10W on PoE+, so the local supply is the one to use for the full 100W. The Dante and control networks can run on separate ports or share one, and the built-in DSP adds a 31-band EQ, audio delay for lip-sync correction and independent gain for each input.
On the output side there are two Dante/AES67 channels back onto the network, a balanced or unbalanced line output that can be set to fixed or variable level, and a dedicated LFE output for a subwoofer. Control is through the front panel, IR remote, RS-232, IP or the web interface, with a 12V trigger input and signal-sensing auto standby. The case is 250mm wide and 45mm tall, and both a 19-inch rack kit and a wall or surface mounting kit are included.
What Blustream say about the NPA100DA
Our NPA100DA networked audio zone amplifier delivers advanced audio integration within a commercial or residential AV installation.
The NPA100DA features a 2x 50W digital amplifier (1 x 100W mono) or 70V / 100V hi-level constant voltage output, dedicated LFE subwoofer output, Dante audio integration and 2ch balanced / un-balanced audio outputs.
The NPA100DA supports a variety of inputs including 2ch Dante audio, HDMI ARC, MIC audio with 48V Phantom power support, optical audio and 2ch balanced / un-balanced analogue audio.
The NPA100DA can be powered via PoE++ from a compatible network switch, or locally should the switch not support PoE++. The unit also includes the ability to lower the amplifier power output subject to PoE capabilities, support for combined or independent LAN and Dante connections, DSP with a 31 band EQ, audio delay for lip sync correction, independent gain control for audio inputs and control via front panel, IR, RS-232, TCP/IP, Web Gui or 12v trigger.
Key Features
- Advanced network audio amplifier with Dante integration
- Supports 2 x 50W @ 4 / 8 ohm, 1 x 100W @ 4 / 8 ohm, or 70 / 100V constant output for multiple speakers with longer cable runs
- Supports power via PoE++ on Dante LAN connection or via local power supply*
- Dual network option - independent Dante and LAN control ports, or combined to a single LAN port
- Audio inputs include:
- 2ch Dante/AES67 audio input
- HDMI ARC with CEC volume control
- MIC audio input with phantom power and auto-ducking
- 2ch Analogue audio input – unbalanced & balanced
- 1 x Optical (S/PDIF) audio input
- Audio outputs include:
- 2ch Dante/AES67 audio Output
- 2ch variable/fixed analogue output, balanced/un-balanced
- 1 x LFE subwoofer output
- Independent gain control for input channels
- DSP with 31 band EQ with +/-10dB gain and audio delay
- Local 12V input trigger for automated power control
- Control via front panel, IR, RS-232 and IP
- Auto standby mode with signal sensing
- In-built web-GUI for setup and control
*Amp power limited when using PoE++ or PoE+
Specifications
General
- Brand: Blustream
- Model: NPA100DA
- Product Type: Networked Power Amplifier with Dante®
- Colour: Black
Amplifier
- Output: 2 x 50W @ 4 / 8 ohm, 1 x 100W @ 4 / 8 ohm (mono), or 70 / 100V constant voltage
- DSP: 31 band EQ with +/-10dB gain and audio delay
- Independent gain control for input channels
Amp Power by Power Source
- 36V/5.5A DC: 100W
- PoE++ Type 4 Class 8: 55W
- PoE++ Type 4 Class 7: 45W
- PoE++ Type 3 Class 6: 35W
- PoE++ Type 3 Class 5: 25W
- PoE+ Type 2 Class 4: 10W
Audio
- Inputs: 2ch Dante®/AES67, HDMI ARC with CEC volume control, MIC with 48V phantom power and auto-ducking, 2ch analogue (balanced / unbalanced), 1 x optical (S/PDIF)
- Outputs: 2ch Dante®/AES67, 2ch variable/fixed analogue (balanced / unbalanced), 1 x LFE subwoofer, 4 / 8 ohm or 70 / 100V speaker output
Connectivity
- Audio Inputs: 1 x 5-Pin Phoenix connector (analogue), 1 x 3-Pin Phoenix connector (MIC), 1 x HDMI Type A, 19-pin, female, locking (ARC), 1 x Optical (S/PDIF)
- Audio Outputs: 1 x 4-Pin Phoenix connector (4 / 8 ohm speaker), 1 x 3-Pin Phoenix connector (70 / 100V speaker), 1 x 5-Pin Phoenix connector (analogue audio), 1 x 2-Pin Phoenix connector (LFE subwoofer)
- Ethernet Port: 1 x LAN RJ45 connector (Dante®), 1 x LAN RJ45 connector (Network)
- RS-232 Serial Port: 1 x 3-Pin Phoenix connector
- IR Input: 1 x 3-Pin Phoenix connector
- Trigger Input: 1 x 2-Pin Phoenix connector
Control
- Front panel, IR, RS-232, TCP/IP and built-in web GUI
- Local 12V input trigger for automated power control
- Auto standby mode with signal sensing
Power
- PoE++ Type 4 on the Dante® LAN port, or 1 x 36V/5.5A DC local power supply (included)
Installation
- 19" rack mounting and wall / surface mounting kit included
Environmental
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Weight and Dimensions
- Dimensions (W x D x H): 250mm x 150mm x 45mm
- Dimensions Including Connections (W x D x H): 252mm x 150mm x 45mm
- Shipping Weight: 2.8 kg
In the Box
- 1 x NPA100DA
- 1 x 36V/5.5A power supply
- 1 x Remote control
- 1 x IR receiver
- 1 x Rack mounting kit
- 1 x Wall / surface mounting kit
- 4 x Rubber feet
- 1 x Quick reference guide
About Blustream
Australian-founded maker of HDMI matrices, HDBaseT extenders and AV distribution products for home and commercial installs.
Blustream started in Melbourne, Australia, and now has offices in the UK and the United States as well. It specialises in HDBaseT matrices and extenders, and its range also covers HDMI switching, audio converters, Dante audio, amplifiers and video over IP. You can use it to route sources to screens across a building.
Read more about BlustreamShow less
HDMI matrices and switches route your sources
Blustream's HDMI matrices and switches let you send several sources to several displays. The range includes 4x4 matrices such as the MX44AB-V2 and smaller switches such as the SW21AB-V2 and SW41AB-V2. A presentation switch, the MFP112, suits meeting rooms. Check the specification for the inputs and outputs.
HDBaseT extenders carry signals over distance
HDBaseT sends video, audio and control over a single network cable, which lets you place a display well away from its source. Blustream lists receivers such as the RX70AMP, which includes an amplifier, and extender sets such as the HEX100HDVGA-KIT.
Converters and cables fill the gaps
Audio extractors and converters, including the CAT100AU, DAC12AU, HD11AU, ADC11AU and DIG11AU, let you pull audio out of an HDMI signal or convert its format. Micro HDMI cables are also available, which helps when a source has only a micro connector.
Up the range 1 product
Specifications
General
- Brand: Blustream
- Model: NPA100DA
- Product Type: Networked Power Amplifier with Dante®
- Colour: Black
Amplifier
- Output: 2 x 50W @ 4 / 8 ohm, 1 x 100W @ 4 / 8 ohm (mono), or 70 / 100V constant voltage
- DSP: 31 band EQ with +/-10dB gain and audio delay
- Independent gain control for input channels
Amp Power by Power Source
- 36V/5.5A DC: 100W
- PoE++ Type 4 Class 8: 55W
- PoE++ Type 4 Class 7: 45W
- PoE++ Type 3 Class 6: 35W
- PoE++ Type 3 Class 5: 25W
- PoE+ Type 2 Class 4: 10W
Audio
- Inputs: 2ch Dante®/AES67, HDMI ARC with CEC volume control, MIC with 48V phantom power and auto-ducking, 2ch analogue (balanced / unbalanced), 1 x optical (S/PDIF)
- Outputs: 2ch Dante®/AES67, 2ch variable/fixed analogue (balanced / unbalanced), 1 x LFE subwoofer, 4 / 8 ohm or 70 / 100V speaker output
Connectivity
- Audio Inputs: 1 x 5-Pin Phoenix connector (analogue), 1 x 3-Pin Phoenix connector (MIC), 1 x HDMI Type A, 19-pin, female, locking (ARC), 1 x Optical (S/PDIF)
- Audio Outputs: 1 x 4-Pin Phoenix connector (4 / 8 ohm speaker), 1 x 3-Pin Phoenix connector (70 / 100V speaker), 1 x 5-Pin Phoenix connector (analogue audio), 1 x 2-Pin Phoenix connector (LFE subwoofer)
- Ethernet Port: 1 x LAN RJ45 connector (Dante®), 1 x LAN RJ45 connector (Network)
- RS-232 Serial Port: 1 x 3-Pin Phoenix connector
- IR Input: 1 x 3-Pin Phoenix connector
- Trigger Input: 1 x 2-Pin Phoenix connector
Control
- Front panel, IR, RS-232, TCP/IP and built-in web GUI
- Local 12V input trigger for automated power control
- Auto standby mode with signal sensing
Power
- PoE++ Type 4 on the Dante® LAN port, or 1 x 36V/5.5A DC local power supply (included)
Installation
- 19" rack mounting and wall / surface mounting kit included
Environmental
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Weight and Dimensions
- Dimensions (W x D x H): 250mm x 150mm x 45mm
- Dimensions Including Connections (W x D x H): 252mm x 150mm x 45mm
- Shipping Weight: 2.8 kg
In the Box
- 1 x NPA100DA
- 1 x 36V/5.5A power supply
- 1 x Remote control
- 1 x IR receiver
- 1 x Rack mounting kit
- 1 x Wall / surface mounting kit
- 4 x Rubber feet
- 1 x Quick reference guide
We use Royal Mail 1st Class services for our Standard Delivery.
Orders received before 4.30 pm Monday to Friday are usually dispatched the same day by FIRST CLASS post (unless premium postal or timed courier services are selected), subject to stock availability. This does not apply to custom-length cables and speaker cables as these require a longer timescale to terminate. This also excludes all cables selected for the burn-in service. Please note, we do not process orders on national holidays in the UK. Over 98% of our orders are delivered the next working day including Saturdays.
Standard delivery is usually within 2 working days, although 98% of all orders are delivered the next working day including Saturdays. In extreme cases, such as delivery to the Highlands and Islands, this may take 3 days.
All items are fully insured and come with an invoice from Future Shop. We use the Royal Mail for delivery of small packages and DPD Local or DHL for items that weigh over 2KG. Items over 2KG are fully insured and will usually be delivered within 48 hours of placing your order subject to stock availability. For international orders, we use FedEx or DHL services where customers have selected this option.
Please note, special orders for non-standard cable lengths may be subject to longer deliver time-scales. This may vary from manufacturer to manufacturer.
We offer 'Free delivery on orders over £99' subject to the following terms & conditions:
- Applies only to orders with £99 or more of items (including VAT at the UK rate), at Future Shop
- Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK (excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL).
- Applies only to deliveries to addresses within mainland UK and Northern Ireland addresses. Applies only to orders that are to be delivered to a single Mainland UK delivery address.
- You will not be eligible for free delivery on your order if any items are cancelled or returned for a refund, bringing the total order amount below £99. Where items are returned, the refund due will be the cost of the item less any postage costs.
- We reserve the right to change or discontinue 'Free delivery on orders over £99 promotion at any time.
- FREE DELIVERY FOR ORDERS OVER £99 OFFER DOES NOT APPLY TO TRADE CUSTOMERS.
UK Postal & Delivery Charges - FIRST CLASS
Free UK delivery on all orders over £99*
| Weight | Price (FIRST CLASS UK POSTAGE) |
| 0g - 1000g | £3.95 |
| 1000g - 1400g | £4.95 |
| 1400g - 1800g | £5.95 |
| 1800g - 2000g | £6.95 |
| 2000g - 3000g | £8.95 |
* Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK.
Free Delivery for orders over £99 excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL.
Special Delivery UK - Guaranteed Next Working Day
We have 99.9% of the UK covered With Royal Mail Next Day Special Delivery. We guarantee delivery to most UK addresses by 1pm the next working day. This includes Northern Ireland, Jersey and Guernsey. Some places take longer to deliver to but we still guarantee delivery within three working days by 5.30 PM.
Please note, Royal Mail Special Delivery for next working day may not be possible where non-standard cable lengths are ordered. If this is the case, the item will be shipped via The Royal Mail Special Delivery service as soon as the cable is custom made.
For orders weighing over 2KG, we reserve the right to ship items using Next Day Pre-Noon Courier Services where Royal Mail Special Delivery option has been selected.
Channel Islands & Northern Ireland
We accept orders from all Channel Islands including Alderney, Jersey, Guernsey and Sark. Unless you select a premium service, Items weighing under 2KG are delivered using our standard UK delivery option above. For items weighing over 2KG, a surcharge may be applied for all deliveries to the Channel Islands as well as Northern Ireland.
European Countries
Deliveries to EU member states are not subject to 20% VAT after December 31st 2020 and therefore the 20% VAT on items is automatically deducted when you log-in, register or proceed to place an order.
The customer will be liable for the VAT at the local VAT rate, duty on the import and the brokerage service fee if applicable. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 3 to 5 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 7-10 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 24 to 48 hours. FedEx orders must be received by 3.00pm for next day service to most destinations in Europe
- Federal Express International Economy - Item are usually delivered within 48 to 72 hours
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Worldwide - Excluding UK & Europe
Deliveries outside of the UK are not subject to 20% VAT and so the 20% tax on items is automatically deducted when you log-in, register or proceed to place an order.
If applicable, the customer will be liable for the taxes at the local tax rate, duty on the import and the brokerage service fee. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 7 to 10 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 15 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 48 hours. FedEx orders must be received by 3.00pm in order to ship items the same day, subject to stock availability
- Where the actual weight of the package significantly exceeds the shipping cost charged on orders, we may write to you for an additional shipping charge. For larger orders, items may be shipped in multiple packets at our discretion
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Frequently Asked Questions
Blustream NPA100DA Networked Power Amplifier with Dante®
The Blustream NPA100DA is a two-channel zone amplifier that takes its audio from a Dante network and drives 4 or 8 ohm speakers at 50W per channel, a single channel at 100W, or a 70V/100V constant-voltage line for several speakers on long cable runs. Alongside its two Dante/AES67 channels it accepts HDMI ARC from a TV with CEC volume control, an optical S/PDIF input, a balanced or unbalanced analogue line input and a microphone input with 48V phantom power and auto-ducking, so a single unit can take TV sound, networked audio and a microphone in one room or zone.
Power comes from a PoE++ switch over the Dante port or from the 36V supply in the box. Blustream's datasheet shows the amplifier output is reduced on PoE, from 55W on a Type 4 Class 8 port down to 10W on PoE+, so the local supply is the one to use for the full 100W. The Dante and control networks can run on separate ports or share one, and the built-in DSP adds a 31-band EQ, audio delay for lip-sync correction and independent gain for each input.
On the output side there are two Dante/AES67 channels back onto the network, a balanced or unbalanced line output that can be set to fixed or variable level, and a dedicated LFE output for a subwoofer. Control is through the front panel, IR remote, RS-232, IP or the web interface, with a 12V trigger input and signal-sensing auto standby. The case is 250mm wide and 45mm tall, and both a 19-inch rack kit and a wall or surface mounting kit are included.
What Blustream say about the NPA100DA
Our NPA100DA networked audio zone amplifier delivers advanced audio integration within a commercial or residential AV installation.
The NPA100DA features a 2x 50W digital amplifier (1 x 100W mono) or 70V / 100V hi-level constant voltage output, dedicated LFE subwoofer output, Dante audio integration and 2ch balanced / un-balanced audio outputs.
The NPA100DA supports a variety of inputs including 2ch Dante audio, HDMI ARC, MIC audio with 48V Phantom power support, optical audio and 2ch balanced / un-balanced analogue audio.
The NPA100DA can be powered via PoE++ from a compatible network switch, or locally should the switch not support PoE++. The unit also includes the ability to lower the amplifier power output subject to PoE capabilities, support for combined or independent LAN and Dante connections, DSP with a 31 band EQ, audio delay for lip sync correction, independent gain control for audio inputs and control via front panel, IR, RS-232, TCP/IP, Web Gui or 12v trigger.
Key Features
- Advanced network audio amplifier with Dante integration
- Supports 2 x 50W @ 4 / 8 ohm, 1 x 100W @ 4 / 8 ohm, or 70 / 100V constant output for multiple speakers with longer cable runs
- Supports power via PoE++ on Dante LAN connection or via local power supply*
- Dual network option - independent Dante and LAN control ports, or combined to a single LAN port
- Audio inputs include:
- 2ch Dante/AES67 audio input
- HDMI ARC with CEC volume control
- MIC audio input with phantom power and auto-ducking
- 2ch Analogue audio input – unbalanced & balanced
- 1 x Optical (S/PDIF) audio input
- Audio outputs include:
- 2ch Dante/AES67 audio Output
- 2ch variable/fixed analogue output, balanced/un-balanced
- 1 x LFE subwoofer output
- Independent gain control for input channels
- DSP with 31 band EQ with +/-10dB gain and audio delay
- Local 12V input trigger for automated power control
- Control via front panel, IR, RS-232 and IP
- Auto standby mode with signal sensing
- In-built web-GUI for setup and control
*Amp power limited when using PoE++ or PoE+
Specifications
General
- Brand: Blustream
- Model: NPA100DA
- Product Type: Networked Power Amplifier with Dante®
- Colour: Black
Amplifier
- Output: 2 x 50W @ 4 / 8 ohm, 1 x 100W @ 4 / 8 ohm (mono), or 70 / 100V constant voltage
- DSP: 31 band EQ with +/-10dB gain and audio delay
- Independent gain control for input channels
Amp Power by Power Source
- 36V/5.5A DC: 100W
- PoE++ Type 4 Class 8: 55W
- PoE++ Type 4 Class 7: 45W
- PoE++ Type 3 Class 6: 35W
- PoE++ Type 3 Class 5: 25W
- PoE+ Type 2 Class 4: 10W
Audio
- Inputs: 2ch Dante®/AES67, HDMI ARC with CEC volume control, MIC with 48V phantom power and auto-ducking, 2ch analogue (balanced / unbalanced), 1 x optical (S/PDIF)
- Outputs: 2ch Dante®/AES67, 2ch variable/fixed analogue (balanced / unbalanced), 1 x LFE subwoofer, 4 / 8 ohm or 70 / 100V speaker output
Connectivity
- Audio Inputs: 1 x 5-Pin Phoenix connector (analogue), 1 x 3-Pin Phoenix connector (MIC), 1 x HDMI Type A, 19-pin, female, locking (ARC), 1 x Optical (S/PDIF)
- Audio Outputs: 1 x 4-Pin Phoenix connector (4 / 8 ohm speaker), 1 x 3-Pin Phoenix connector (70 / 100V speaker), 1 x 5-Pin Phoenix connector (analogue audio), 1 x 2-Pin Phoenix connector (LFE subwoofer)
- Ethernet Port: 1 x LAN RJ45 connector (Dante®), 1 x LAN RJ45 connector (Network)
- RS-232 Serial Port: 1 x 3-Pin Phoenix connector
- IR Input: 1 x 3-Pin Phoenix connector
- Trigger Input: 1 x 2-Pin Phoenix connector
Control
- Front panel, IR, RS-232, TCP/IP and built-in web GUI
- Local 12V input trigger for automated power control
- Auto standby mode with signal sensing
Power
- PoE++ Type 4 on the Dante® LAN port, or 1 x 36V/5.5A DC local power supply (included)
Installation
- 19" rack mounting and wall / surface mounting kit included
Environmental
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Weight and Dimensions
- Dimensions (W x D x H): 250mm x 150mm x 45mm
- Dimensions Including Connections (W x D x H): 252mm x 150mm x 45mm
- Shipping Weight: 2.8 kg
In the Box
- 1 x NPA100DA
- 1 x 36V/5.5A power supply
- 1 x Remote control
- 1 x IR receiver
- 1 x Rack mounting kit
- 1 x Wall / surface mounting kit
- 4 x Rubber feet
- 1 x Quick reference guide
About Blustream
Australian-founded maker of HDMI matrices, HDBaseT extenders and AV distribution products for home and commercial installs.
Blustream started in Melbourne, Australia, and now has offices in the UK and the United States as well. It specialises in HDBaseT matrices and extenders, and its range also covers HDMI switching, audio converters, Dante audio, amplifiers and video over IP. You can use it to route sources to screens across a building.
Read more about BlustreamShow less
HDMI matrices and switches route your sources
Blustream's HDMI matrices and switches let you send several sources to several displays. The range includes 4x4 matrices such as the MX44AB-V2 and smaller switches such as the SW21AB-V2 and SW41AB-V2. A presentation switch, the MFP112, suits meeting rooms. Check the specification for the inputs and outputs.
HDBaseT extenders carry signals over distance
HDBaseT sends video, audio and control over a single network cable, which lets you place a display well away from its source. Blustream lists receivers such as the RX70AMP, which includes an amplifier, and extender sets such as the HEX100HDVGA-KIT.
Converters and cables fill the gaps
Audio extractors and converters, including the CAT100AU, DAC12AU, HD11AU, ADC11AU and DIG11AU, let you pull audio out of an HDMI signal or convert its format. Micro HDMI cables are also available, which helps when a source has only a micro connector.
Specifications
General
- Brand: Blustream
- Model: NPA100DA
- Product Type: Networked Power Amplifier with Dante®
- Colour: Black
Amplifier
- Output: 2 x 50W @ 4 / 8 ohm, 1 x 100W @ 4 / 8 ohm (mono), or 70 / 100V constant voltage
- DSP: 31 band EQ with +/-10dB gain and audio delay
- Independent gain control for input channels
Amp Power by Power Source
- 36V/5.5A DC: 100W
- PoE++ Type 4 Class 8: 55W
- PoE++ Type 4 Class 7: 45W
- PoE++ Type 3 Class 6: 35W
- PoE++ Type 3 Class 5: 25W
- PoE+ Type 2 Class 4: 10W
Audio
- Inputs: 2ch Dante®/AES67, HDMI ARC with CEC volume control, MIC with 48V phantom power and auto-ducking, 2ch analogue (balanced / unbalanced), 1 x optical (S/PDIF)
- Outputs: 2ch Dante®/AES67, 2ch variable/fixed analogue (balanced / unbalanced), 1 x LFE subwoofer, 4 / 8 ohm or 70 / 100V speaker output
Connectivity
- Audio Inputs: 1 x 5-Pin Phoenix connector (analogue), 1 x 3-Pin Phoenix connector (MIC), 1 x HDMI Type A, 19-pin, female, locking (ARC), 1 x Optical (S/PDIF)
- Audio Outputs: 1 x 4-Pin Phoenix connector (4 / 8 ohm speaker), 1 x 3-Pin Phoenix connector (70 / 100V speaker), 1 x 5-Pin Phoenix connector (analogue audio), 1 x 2-Pin Phoenix connector (LFE subwoofer)
- Ethernet Port: 1 x LAN RJ45 connector (Dante®), 1 x LAN RJ45 connector (Network)
- RS-232 Serial Port: 1 x 3-Pin Phoenix connector
- IR Input: 1 x 3-Pin Phoenix connector
- Trigger Input: 1 x 2-Pin Phoenix connector
Control
- Front panel, IR, RS-232, TCP/IP and built-in web GUI
- Local 12V input trigger for automated power control
- Auto standby mode with signal sensing
Power
- PoE++ Type 4 on the Dante® LAN port, or 1 x 36V/5.5A DC local power supply (included)
Installation
- 19" rack mounting and wall / surface mounting kit included
Environmental
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Weight and Dimensions
- Dimensions (W x D x H): 250mm x 150mm x 45mm
- Dimensions Including Connections (W x D x H): 252mm x 150mm x 45mm
- Shipping Weight: 2.8 kg
In the Box
- 1 x NPA100DA
- 1 x 36V/5.5A power supply
- 1 x Remote control
- 1 x IR receiver
- 1 x Rack mounting kit
- 1 x Wall / surface mounting kit
- 4 x Rubber feet
- 1 x Quick reference guide
We use Royal Mail 1st Class services for our Standard Delivery.
Orders received before 4.30 pm Monday to Friday are usually dispatched the same day by FIRST CLASS post (unless premium postal or timed courier services are selected), subject to stock availability. This does not apply to custom-length cables and speaker cables as these require a longer timescale to terminate. This also excludes all cables selected for the burn-in service. Please note, we do not process orders on national holidays in the UK. Over 98% of our orders are delivered the next working day including Saturdays.
Standard delivery is usually within 2 working days, although 98% of all orders are delivered the next working day including Saturdays. In extreme cases, such as delivery to the Highlands and Islands, this may take 3 days.
All items are fully insured and come with an invoice from Future Shop. We use the Royal Mail for delivery of small packages and DPD Local or DHL for items that weigh over 2KG. Items over 2KG are fully insured and will usually be delivered within 48 hours of placing your order subject to stock availability. For international orders, we use FedEx or DHL services where customers have selected this option.
Please note, special orders for non-standard cable lengths may be subject to longer deliver time-scales. This may vary from manufacturer to manufacturer.
We offer 'Free delivery on orders over £99' subject to the following terms & conditions:
- Applies only to orders with £99 or more of items (including VAT at the UK rate), at Future Shop
- Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK (excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL).
- Applies only to deliveries to addresses within mainland UK and Northern Ireland addresses. Applies only to orders that are to be delivered to a single Mainland UK delivery address.
- You will not be eligible for free delivery on your order if any items are cancelled or returned for a refund, bringing the total order amount below £99. Where items are returned, the refund due will be the cost of the item less any postage costs.
- We reserve the right to change or discontinue 'Free delivery on orders over £99 promotion at any time.
- FREE DELIVERY FOR ORDERS OVER £99 OFFER DOES NOT APPLY TO TRADE CUSTOMERS.
UK Postal & Delivery Charges - FIRST CLASS
Free UK delivery on all orders over £99*
| Weight | Price (FIRST CLASS UK POSTAGE) |
| 0g - 1000g | £3.95 |
| 1000g - 1400g | £4.95 |
| 1400g - 1800g | £5.95 |
| 1800g - 2000g | £6.95 |
| 2000g - 3000g | £8.95 |
* Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK.
Free Delivery for orders over £99 excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL.
Special Delivery UK - Guaranteed Next Working Day
We have 99.9% of the UK covered With Royal Mail Next Day Special Delivery. We guarantee delivery to most UK addresses by 1pm the next working day. This includes Northern Ireland, Jersey and Guernsey. Some places take longer to deliver to but we still guarantee delivery within three working days by 5.30 PM.
Please note, Royal Mail Special Delivery for next working day may not be possible where non-standard cable lengths are ordered. If this is the case, the item will be shipped via The Royal Mail Special Delivery service as soon as the cable is custom made.
For orders weighing over 2KG, we reserve the right to ship items using Next Day Pre-Noon Courier Services where Royal Mail Special Delivery option has been selected.
Channel Islands & Northern Ireland
We accept orders from all Channel Islands including Alderney, Jersey, Guernsey and Sark. Unless you select a premium service, Items weighing under 2KG are delivered using our standard UK delivery option above. For items weighing over 2KG, a surcharge may be applied for all deliveries to the Channel Islands as well as Northern Ireland.
European Countries
Deliveries to EU member states are not subject to 20% VAT after December 31st 2020 and therefore the 20% VAT on items is automatically deducted when you log-in, register or proceed to place an order.
The customer will be liable for the VAT at the local VAT rate, duty on the import and the brokerage service fee if applicable. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 3 to 5 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 7-10 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 24 to 48 hours. FedEx orders must be received by 3.00pm for next day service to most destinations in Europe
- Federal Express International Economy - Item are usually delivered within 48 to 72 hours
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Worldwide - Excluding UK & Europe
Deliveries outside of the UK are not subject to 20% VAT and so the 20% tax on items is automatically deducted when you log-in, register or proceed to place an order.
If applicable, the customer will be liable for the taxes at the local tax rate, duty on the import and the brokerage service fee. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 7 to 10 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 15 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 48 hours. FedEx orders must be received by 3.00pm in order to ship items the same day, subject to stock availability
- Where the actual weight of the package significantly exceeds the shipping cost charged on orders, we may write to you for an additional shipping charge. For larger orders, items may be shipped in multiple packets at our discretion
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Write Your Own Review
Blustream NPA100DA Networked Power Amplifier with Dante®
We are interested in your opinion. Let us and other customers know how you feel by filling in the comment field below.
No reviews yet. Be the first to review this product.
Frequently Asked Questions
Up the range 1 product
Did you find what you were looking for?
Write Your Own Review
Blustream NPA100DA Networked Power Amplifier with Dante®
We are interested in your opinion of this product. let us and other customers know how you feel by filling in the comment field below. Your review will appear in this section within 3 working days.
Please do:
- - Write 50-300 words for the product
- - Comment on the products value and effectiveness
- - Tell us if you like the product, but most importantly explain why you like or dislike it
- - Mention related products and how this one rates by comparison
