Furutech
Japanese maker of connectors, plugs and power products, founded in 1988 in Tokyo. Furutech supply components to other cable manufacturers as well as selling under their own name, and their plugs are found across the industry.
About Furutech
Quick Access
The company whose connectors are inside other brands' cables
Furutech occupy an unusual position. Founded in Tokyo in 1988, they sell finished cables and power products under their own name, but they are just as significant as a component supplier: a large number of cable brands terminate their products with Furutech plugs, sometimes saying so and sometimes not.
That gives the company a different set of priorities from a cable house. The focus is on the connector itself, on the metallurgy, the plating, the contact pressure and what happens at the joint between conductor and pin. Furutech's two-stage Alpha Process gives every metal part a deep cryogenic freeze followed by a patented Ring Demagnetization treatment, and it is applied to the metal parts rather than to a finished cable.
NCF is the development they are best known for. Nano Crystal² Formula is a compound built into plug bodies, connectors and accessories. Furutech say the crystalline material at its heart does two things: it generates negative ions that dissipate static, and it converts thermal energy into far infrared. Combined with nano-scale ceramic particles and carbon powder, it adds piezoelectric damping on top of that. It appears across the connector range and in the NCF Booster supports.
The catalogue is wide, from DIY plugs at a few pounds through to reference mains cables and distributors, which makes Furutech useful both to people building their own cables and to people buying finished ones.
Browse by Range
NCF and Alpha are the two treatments that run through the range rather than separate product lines, so you will find both applied across plugs, cables and accessories.
-
£40.00Ex. VATThe Furutech CF63-S (R) is the carbon fibre version of Furutech's compact headphone plug adaptor. Its main conductor is rhodium-plated Alpha phosphor bronze and copper alloy insulated in POM resin, and the housing is rhodium-plated Alpha copper alloy with a carbon fibre finish rather than plain stainless steel.
-
£20.83Ex. VATThe Furutech FP-703 (G) is a high performance 6.3mm mono jack plug for terminating instrument, speaker and unbalanced line cable. It uses an Alpha eutectic cast copper alloy centre pin with gold plating, a copper alloy rear housing insulated in PBT and fibreglass, and a cast Zn-Mg alloy body. It solders to cable up to 8mm in diameter.
-
£23.33Ex. VATThe Furutech FP-704 (G) is a high performance 6.3mm stereo jack plug for terminating headphone cable and balanced or stereo line connections. It uses an Alpha eutectic cast copper alloy centre pin with gold plating, a copper alloy rear housing insulated in PBT and fibreglass, and a cast Zn-Mg alloy body. It solders to cable up to 8mm in diameter.
-
£37.50Ex. VATThe Furutech FP-Mono-63 (G) is a high performance 6.3mm mono connector built around a one-piece gold-plated Alpha copper alloy conductor with PBT insulation and a stainless steel housing. It accepts core insulation up to 8.0mm, solders rather than crimps, and weighs 18.4g with a total length of 70mm.
-
£37.50Ex. VATThe Furutech FP-Mono-63L (G) is the right-angle version of Furutech's 6.3mm mono plug, built around a one-piece gold-plated copper alloy conductor with PBT insulation and a non-magnetic stainless steel housing. It accepts wire insulation up to 7.5mm, solders rather than crimps, and weighs approximately 25.1g. Furutech have discontinued this part.
-
£29.17Ex. VATThe Furutech FP-705M (R) is the male half of Furutech's 4-pin balanced XLR connector pair, the standard termination for balanced headphone cable. It uses rhodium-plated Alpha copper alloy conductors in PBT and fibreglass resin insulation, with a non-magnetic zinc and aluminium alloy housing in a black painted finish. It accepts cable up to 9mm and solders.
-
£30.83Ex. VATThe Furutech FP-706F (R) is the female half of Furutech's 4-pin balanced XLR connector pair, used where a balanced headphone cable terminates in a socket rather than a plug. It uses rhodium-plated Alpha copper alloy conductors in PBT and fibreglass resin insulation, with a non-magnetic zinc and aluminium alloy housing in a black painted finish.
-
£45.00Ex. VATThe Furutech FT-7445 (R) is a high end 4.4mm TRRRS balanced connector, the five-pole standard used by Sony's Signature Series and now across portable audio. It uses a one-piece rhodium-plated Alpha copper alloy conductor with audio grade POM insulation and a non-magnetic stainless steel housing. It accepts core insulation up to 6.0mm and weighs 11.8g.
-
£62.50Ex. VATThe Furutech CF-7445 (R) is the carbon fibre version of Furutech's 4.4mm TRRRS balanced connector, the five-pole standard used by Sony's Signature Series. It shares the one-piece rhodium-plated Alpha copper alloy conductor and audio grade POM insulation of the FT-7445, in a stainless steel housing with a carbon fibre finish, and weighs 8.8g.
-
£29.17Ex. VATThe Furutech FT-735SM (R) is a high performance 3.5mm stereo connector built around a one-piece rhodium-plated Alpha pure copper conductor, insulated in a special grade nylon glass fibre resin and housed in stainless steel. It accepts core insulation up to 5.0mm, solders rather than crimps, and measures 43.0mm overall.
-
£44.17Ex. VATThe Furutech FT-735SM (R) is a high performance 3.5mm stereo connector built around a one-piece rhodium-plated Alpha pure copper conductor, insulated in a special grade nylon glass fibre resin and housed in stainless steel. It accepts core insulation up to 5.0mm, solders rather than crimps, and measures 43.0mm overall.
-
£46.67Ex. VATThe Furutech FT-763SM (R) is a high performance 6.3mm stereo connector built around a one-piece rhodium-plated Alpha pure copper conductor, insulated in a special grade nylon glass fibre resin and housed in stainless steel. It accepts core insulation up to 8.0mm, terminates by soldering, and measures 70.5mm overall.