Chord SignatureXL Speaker Cable - Factory Terminated
Usage Guide
Amplifier
Speakers
Connection Guide
Spade
Banana
BFA
Our Hi-Fi specialists give free, honest advice — no commission, ever. Contact us by email or phone and we'll help you find the right cable for your system.
Item code: SignatureXL
Inc. VAT (20%) · Ex. VAT: £390.00 Ex. VAT · Inc. VAT (20%):
Lowest price in the last 30 days:
Request to Price Match
If you've seen a better offer for this product, we will endeavour to match it. The competing offer must be on brand-new boxed items, and in stock from another UK Online Authorised Retailer (excluding marketplaces). Price match quotations are valid for 7 days.
SPEAKER CABLES:
A quantity of 2 means you will receive a pair of speaker cables e.g. for your front left and front right speakers. By entering a quantity of 1, you will get a cable for a single speaker e.g. centre speaker and this option also enables you to vary the length (and termination) of your cable for each speaker.
OTHER CABLES:
A quantity of 1 means you will receive a single cable in the case of aerial, satellite, subwoofer, digital coaxial & optical cables and a pair of cables in the case of 2 rca to 2 rca analogue audio cables.
NON-CABLE PRODUCTS:
A quantity of 1 means you will receive 1 of the specified products.
Order before 4pm (Mon–Fri) for same-day dispatch
Chord SignatureXL Speaker Cable - Factory Terminated
Signature was Chord's first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance.
It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.
It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.
Signature Reference, like most of Chord's cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chord's “go to” material. Although expensive, it offered the best performance.
Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.
Contact Enhancer Option
To ensure the best possible connection between your system, Future Shop recommends the DeoxIT Gold G-Series contact enhancer.
DeoxIT Gold is carefully applied to the plug contacts of your cable and is a unique conditioning solution designed to improve conductivity and provide long-lasting protection on gold, base metals and other precious metal contacts and connections. DeoxIT Gold penetrates plated surfaces, molecularly bonding to the base metals to seal and protect both surfaces.
The benefits of applying DeoxIT gold are:
- Improved Conductivity
- Maintained optimum signal quality
- Reduced wear & abrasion
- Prevents fretting/dendrite corrosion
- Forms a protective anti-tarnishing coating
- Stabilises connections between similar and dissimilar metals
- Reduces arcing, RFI and intermittent connections
Please select this option from the above ‘Contact Enhancer’ drop-down menu and our engineers will apply the contact solution to your cable connectors prior to shipping.
|
"Tested in an all-Signature cable system, Alan was impressed by the consistency, brought about by a fine balance; “If it has a sonic intent, it’s one of musical enjoyment rather than stark detailing. But it’s so well balanced in terms of price, performance, partners and probably some other things that don’t begin with the letter ‘P’." Bass lines are taut and deep and extremely musically infectious; the midrange is open sounding and articulate." (Read More) hi-fi+ Best Loudspeaker Cable - 2022 |
|
|
|
“High-end cable design asks a lot of the designers partly because the price places expectations upon them. Chord has nothing to fear here because this set of cables provides a splendid array of sonic highlights that provides fine transparency and - yes - neutrality of tone to bring a sense of natural music detail. A fine set of loudspeaker cables then.” (Read More) Equipment Review - Hi-Fi World - October 2018
|
Specification :
- Please note, you need to enter a quantity of 2 for a pair
- Conductors: Silver-plated, high purity OFC
- Configuration: Twisted pair
- Conductor Insulation: XLPE
- Shielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacket
- AWG: 10
- mm2: 5.26
- Diameter: 2 x 8.5mm
- Colour: Red/black or all black
- Ten Year Warranty
Termination
This cable is custom-made according to customers specific requirements as selected by the various drop-down options above. Chord’s highly experienced engineers professionally terminate using their superb silver-plated ChordOhmic plugs.
ChordOhmic is Chord’s new silver-plated termination option designed to bring both the electrical and sonic benefits of silver to your speaker cable. Chord terminates their speaker cables using a specially designed HEXGUN. An airtight crimp is applied to the plug creating a secure and protected termination. This is a solder-free, airtight fusion between the cable and plug offering optimum signal transfer, excellent signal quality and perfect long-term performance. Furthermore, the banana plug itself is in contact with the binding post again at 360 degrees. The net effect of this is it maximises the signal transfer from the plug into your equipment and hence a superior performance. When a bare wire is used not all the conductors are in contact with the binding post and as a result, some loss occurs.
How to Order
From the dropdown menus' above, simply select the length of cable, the type of plugs required at the ‘Amplifier end’ and ‘Speaker end’ and click on the 'Add to Basket' button to add the item to your basket. Your cable will be dispatched as soon as it has been made by Future Shop's or the manufacturer’s engineers and has completed the specified burn-in process (if any), subject to Future Shop’s Terms & Conditions and stock availability.
About The Chord Company 
The Chord Company is dedicated to offering excellence in audio and audio visual cable design. Chord products have earned numerous accolades in the audio and recording industries over the past two decades. Based in Salisbury UK, The Chord Company continues to drive cable design and technology to its limits with the majority of its spectacular array of performance products designed and made in the UK.
About Chord Company
English cable maker that designs and hand builds in Wiltshire, known for its ARAY conductor technology.
Chord describes its cables as designed and hand built in England, at Amesbury in Wiltshire. The catalogue covers interconnects, speaker cables, power cables, HDMI cables, Burndy cables and accessories. ARAY conductor technology, and its Tuned ARAY refinement, appears across several of the ranges, from analogue interconnects to digital and USB cables.
Read more about Chord Show less
ARAY conductors appear in several ranges
ARAY is Chord's conductor geometry. The Signature digital cables pair it with silver-plated oxygen-free copper conductors, PTFE insulation and silver-plated braid and foil screening. Tuned ARAY is a later development of the same idea and appears in the Epic, Signature, Sarum and Shawline ranges, while ClearwayX carries ARAY.
Power and grounding get the same attention
Chord extends its ARAY work beyond signal cables, with PowerARAY, GroundARAY, PowerHAUS mains products and the PhonoARAY grounding product. ChorAlloy is another named Chord technology. Grounding and mains products work on a different part of the chain from signal cables, so they are the place to look when noise is the problem in your system.
Named ranges from one English maker
The ranges are Leyline, C-series, Clearway, Shawline, Epic, Signature and Sarum T, with ChordMusic as a further line. Chord describes its cables as English design and hand construction, so choosing a range comes down to your budget and your system, not to changing approach.
Why we stock Chord
A lot of our customers own Naim. Naim's DIN inputs need a specific cable that most brands simply do not make, and Chord build them properly, in Wiltshire, by hand. If you are running a Naim system and you want an interconnect that fits it correctly, this is where you end up. We have stocked them since 2007.
New cables (even high-quality ones) benefit from a period of signal conditioning before reaching their optimum performance. The dielectric (insulation) around the conductors needs time to stabilise under the electromagnetic field created by signal flow. Rather than leaving this to you, we run cables on our Nordost Vidar burn-in machine before dispatch, up to the equivalent of 200 hours of use, in a fraction of the time. Your cable arrives performance-ready from the first listen.
Specification :
- Please note, you need to enter a quantity of 2 for a pair
- Conductors: Silver-plated, high purity OFC
- Configuration: Twisted pair
- Conductor Insulation: XLPE
- Shielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacket
- AWG: 10
- mm2: 5.26
- Diameter: 2 x 8.5mm
- Colour: Red/black or all black
- Ten Year Warranty
We use Royal Mail 1st Class services for our Standard Delivery.
Orders received before 4.30 pm Monday to Friday are usually dispatched the same day by FIRST CLASS post (unless premium postal or timed courier services are selected), subject to stock availability. This does not apply to custom-length cables and speaker cables as these require a longer timescale to terminate. This also excludes all cables selected for the burn-in service. Please note, we do not process orders on national holidays in the UK. Over 98% of our orders are delivered the next working day including Saturdays.
Standard delivery is usually within 2 working days, although 98% of all orders are delivered the next working day including Saturdays. In extreme cases, such as delivery to the Highlands and Islands, this may take 3 days.
All items are fully insured and come with an invoice from Future Shop. We use the Royal Mail for delivery of small packages and DPD Local or DHL for items that weigh over 2KG. Items over 2KG are fully insured and will usually be delivered within 48 hours of placing your order subject to stock availability. For international orders, we use FedEx or DHL services where customers have selected this option.
Please note, special orders for non-standard cable lengths may be subject to longer deliver time-scales. This may vary from manufacturer to manufacturer.
We offer 'Free delivery on orders over £99' subject to the following terms & conditions:
- Applies only to orders with £99 or more of items (including VAT at the UK rate), at Future Shop
- Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK (excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL).
- Applies only to deliveries to addresses within mainland UK and Northern Ireland addresses. Applies only to orders that are to be delivered to a single Mainland UK delivery address.
- You will not be eligible for free delivery on your order if any items are cancelled or returned for a refund, bringing the total order amount below £99. Where items are returned, the refund due will be the cost of the item less any postage costs.
- We reserve the right to change or discontinue 'Free delivery on orders over £99 promotion at any time.
- FREE DELIVERY FOR ORDERS OVER £99 OFFER DOES NOT APPLY TO TRADE CUSTOMERS.
UK Postal & Delivery Charges - FIRST CLASS
Free UK delivery on all orders over £99*
| Weight | Price (FIRST CLASS UK POSTAGE) |
| 0g - 1000g | £3.95 |
| 1000g - 1400g | £4.95 |
| 1400g - 1800g | £5.95 |
| 1800g - 2000g | £6.95 |
| 2000g - 3000g | £8.95 |
* Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK.
Free Delivery for orders over £99 excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL.
Special Delivery UK - Guaranteed Next Working Day
We have 99.9% of the UK covered With Royal Mail Next Day Special Delivery. We guarantee delivery to most UK addresses by 1pm the next working day. This includes Northern Ireland, Jersey and Guernsey. Some places take longer to deliver to but we still guarantee delivery within three working days by 5.30 PM.
Please note, Royal Mail Special Delivery for next working day may not be possible where non-standard cable lengths are ordered. If this is the case, the item will be shipped via The Royal Mail Special Delivery service as soon as the cable is custom made.
For orders weighing over 2KG, we reserve the right to ship items using Next Day Pre-Noon Courier Services where Royal Mail Special Delivery option has been selected.
Channel Islands & Northern Ireland
We accept orders from all Channel Islands including Alderney, Jersey, Guernsey and Sark. Unless you select a premium service, Items weighing under 2KG are delivered using our standard UK delivery option above. For items weighing over 2KG, a surcharge may be applied for all deliveries to the Channel Islands as well as Northern Ireland.
European Countries
Deliveries to EU member states are not subject to 20% VAT after December 31st 2020 and therefore the 20% VAT on items is automatically deducted when you log-in, register or proceed to place an order.
The customer will be liable for the VAT at the local VAT rate, duty on the import and the brokerage service fee if applicable. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 3 to 5 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 7-10 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 24 to 48 hours. FedEx orders must be received by 3.00pm for next day service to most destinations in Europe
- Federal Express International Economy - Item are usually delivered within 48 to 72 hours
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Worldwide - Excluding UK & Europe
Deliveries outside of the UK are not subject to 20% VAT and so the 20% tax on items is automatically deducted when you log-in, register or proceed to place an order.
If applicable, the customer will be liable for the taxes at the local tax rate, duty on the import and the brokerage service fee. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 7 to 10 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 15 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 48 hours. FedEx orders must be received by 3.00pm in order to ship items the same day, subject to stock availability
- Where the actual weight of the package significantly exceeds the shipping cost charged on orders, we may write to you for an additional shipping charge. For larger orders, items may be shipped in multiple packets at our discretion
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Frequently Asked Questions
Free Premium Cable Burn-In Service: Experience the Power of Nordost VIDAR 2 Machine
We are thrilled to unveil our upgraded cable burn-in service, now featuring the cutting-edge VIDAR 2 burn-in machine. At Future Shop, we strive to provide the best possible experience for our customers, and this enhanced service is designed to unlock the true potential of your high-end cables. Read on to discover the exceptional benefits and advancements offered by the VIDAR 2 machine.
Please note: We are unable to burn-in cables with stripped bare ends or BFA plugs. Cable burn-in occurs after your order has been processed for the selected time period. For custom-length cables, burn-in takes place after termination by the manufacturer or our skilled engineers.
The Nordost VIDAR cable burn-in machine seamlessly combines three vital functions into a single operation:
- Neutralising charges around cables and insulation: The VIDAR 2 effectively dissipates any built-up charges, creating an optimal environment for signal transmission.
- Deep conditioning into the conductor core: With its wide band and profound conditioning capabilities, the machine induces significant changes in signal passage through the metal, resulting in enhanced performance.
- Ultrasonic surface conditioning of conductors: The VIDAR 2 employs ultrasonic technology to refine the conductor surface, further refining the signal quality.
In addition to all the advantages of its predecessor, the VIDAR 2 introduces remarkable improvements, including:
- Complex burn-in signal with wider bandwidth and richer content
- Enhanced directionality for cables
- FOUR burn-in zones - including a new digital zone for USB, Ethernet, and Coaxial (BNC) cables.
Using a proprietary blend of composite and complex signals, the VIDAR 2 ensures comprehensive cable conditioning. The signal consists of ultra-low and ultra-high frequencies, surpassing video frequency ranges. The signal effectively penetrates the core at ultra-low frequencies by oscillating throughout the cable while swiftly traversing the surface at ultra-high frequencies. This transmission methodology counters harmonics and heterodynes between the two complex waveforms, improving signal performance throughout all cable layers.
Furthermore, the circuitry design boasts a unique feature that drives electrons above the conductor into the dielectric or insulation area. This process neutralizes any electrical charges that may impact the signal integrity. With the Nordost VIDAR, we go beyond merely sending ping-pong signals along the cable; we also ensure a balanced signal flow from the centre core to the outer shield in interconnect cables.
What does all this mean for you?
Conditioning your cables with the Nordost VIDAR yields remarkable benefits, including enhanced sound staging, heightened detail reproduction, and a more captivating and musical presentation.
We offer our cable burn-in service as a complimentary offering at the discretion of Future Shop. While we strive to accommodate all burn-in requests for the specified time periods, please understand that during exceptionally busy periods, we may be unable to fulfill all demands due to the limited connections available on the Nordost VIDAR cable conditioning machines.
READ MORE ABOUT THE NORDOST VIDAR 2 BURN-IN TREATMENT
Chord SignatureXL Speaker Cable - Factory Terminated
Signature was Chord's first high-frequency shielded speaker cable. At the time of its introduction (2004/5), it marked a massive leap in speaker cable performance.
It was also the biggest, stiffest, brightest cable Chord had ever made. The conductors were oxygen free copper, the insulation was gas foamed Polyethylene, Shielding was a three layer braid and foil combination, effective to high frequencies and the outer jacket a flexible polyethylene. It was just flexible enough to fit into a system. Signature speaker cable was another product that didn’t need a press release or a review, it took off so fast by word of mouth, that for a while there was almost a permanent waiting list.
It remained unchanged for about ten years, until Chord could apply improved building techniques and materials such as more efficient shielding, silver-plated conductors and PTFE insulation that would produce a more neutral tonal characteristic and a cable better able to carry detail, dynamics and timbre. This became Signature Reference.
Signature Reference, like most of Chord's cables, used PTFE insulation (often referred to as Teflon™) and until the arrival of Taylon®, was Chord's “go to” material. Although expensive, it offered the best performance.
Material technology is constantly developing and improving and alternatives to PTFE are now available. While the high cost of Taylon® prevents Chord from using this in their Signature range, they were able to find a suitable family of insulation materials known as XLPE (Cross-linked Polyethylene). One version of this material looked particularly interesting and following listening tests, proved to be clearly better than the PTFE in Signature Reference.
Contact Enhancer Option
To ensure the best possible connection between your system, Future Shop recommends the DeoxIT Gold G-Series contact enhancer.
DeoxIT Gold is carefully applied to the plug contacts of your cable and is a unique conditioning solution designed to improve conductivity and provide long-lasting protection on gold, base metals and other precious metal contacts and connections. DeoxIT Gold penetrates plated surfaces, molecularly bonding to the base metals to seal and protect both surfaces.
The benefits of applying DeoxIT gold are:
- Improved Conductivity
- Maintained optimum signal quality
- Reduced wear & abrasion
- Prevents fretting/dendrite corrosion
- Forms a protective anti-tarnishing coating
- Stabilises connections between similar and dissimilar metals
- Reduces arcing, RFI and intermittent connections
Please select this option from the above ‘Contact Enhancer’ drop-down menu and our engineers will apply the contact solution to your cable connectors prior to shipping.
|
"Tested in an all-Signature cable system, Alan was impressed by the consistency, brought about by a fine balance; “If it has a sonic intent, it’s one of musical enjoyment rather than stark detailing. But it’s so well balanced in terms of price, performance, partners and probably some other things that don’t begin with the letter ‘P’." Bass lines are taut and deep and extremely musically infectious; the midrange is open sounding and articulate." (Read More) hi-fi+ Best Loudspeaker Cable - 2022 |
|
|
|
“High-end cable design asks a lot of the designers partly because the price places expectations upon them. Chord has nothing to fear here because this set of cables provides a splendid array of sonic highlights that provides fine transparency and - yes - neutrality of tone to bring a sense of natural music detail. A fine set of loudspeaker cables then.” (Read More) Equipment Review - Hi-Fi World - October 2018
|
Specification :
- Please note, you need to enter a quantity of 2 for a pair
- Conductors: Silver-plated, high purity OFC
- Configuration: Twisted pair
- Conductor Insulation: XLPE
- Shielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacket
- AWG: 10
- mm2: 5.26
- Diameter: 2 x 8.5mm
- Colour: Red/black or all black
- Ten Year Warranty
Termination
This cable is custom-made according to customers specific requirements as selected by the various drop-down options above. Chord’s highly experienced engineers professionally terminate using their superb silver-plated ChordOhmic plugs.
ChordOhmic is Chord’s new silver-plated termination option designed to bring both the electrical and sonic benefits of silver to your speaker cable. Chord terminates their speaker cables using a specially designed HEXGUN. An airtight crimp is applied to the plug creating a secure and protected termination. This is a solder-free, airtight fusion between the cable and plug offering optimum signal transfer, excellent signal quality and perfect long-term performance. Furthermore, the banana plug itself is in contact with the binding post again at 360 degrees. The net effect of this is it maximises the signal transfer from the plug into your equipment and hence a superior performance. When a bare wire is used not all the conductors are in contact with the binding post and as a result, some loss occurs.
How to Order
From the dropdown menus' above, simply select the length of cable, the type of plugs required at the ‘Amplifier end’ and ‘Speaker end’ and click on the 'Add to Basket' button to add the item to your basket. Your cable will be dispatched as soon as it has been made by Future Shop's or the manufacturer’s engineers and has completed the specified burn-in process (if any), subject to Future Shop’s Terms & Conditions and stock availability.
About The Chord Company
The Chord Company is dedicated to offering excellence in audio and audio visual cable design. Chord products have earned numerous accolades in the audio and recording industries over the past two decades. Based in Salisbury UK, The Chord Company continues to drive cable design and technology to its limits with the majority of its spectacular array of performance products designed and made in the UK.
About Chord Company
English cable maker that designs and hand builds in Wiltshire, known for its ARAY conductor technology.
Chord describes its cables as designed and hand built in England, at Amesbury in Wiltshire. The catalogue covers interconnects, speaker cables, power cables, HDMI cables, Burndy cables and accessories. ARAY conductor technology, and its Tuned ARAY refinement, appears across several of the ranges, from analogue interconnects to digital and USB cables.
Read more about Chord Show less
ARAY conductors appear in several ranges
ARAY is Chord's conductor geometry. The Signature digital cables pair it with silver-plated oxygen-free copper conductors, PTFE insulation and silver-plated braid and foil screening. Tuned ARAY is a later development of the same idea and appears in the Epic, Signature, Sarum and Shawline ranges, while ClearwayX carries ARAY.
Power and grounding get the same attention
Chord extends its ARAY work beyond signal cables, with PowerARAY, GroundARAY, PowerHAUS mains products and the PhonoARAY grounding product. ChorAlloy is another named Chord technology. Grounding and mains products work on a different part of the chain from signal cables, so they are the place to look when noise is the problem in your system.
Named ranges from one English maker
The ranges are Leyline, C-series, Clearway, Shawline, Epic, Signature and Sarum T, with ChordMusic as a further line. Chord describes its cables as English design and hand construction, so choosing a range comes down to your budget and your system, not to changing approach.
Why we stock Chord
A lot of our customers own Naim. Naim's DIN inputs need a specific cable that most brands simply do not make, and Chord build them properly, in Wiltshire, by hand. If you are running a Naim system and you want an interconnect that fits it correctly, this is where you end up. We have stocked them since 2007.
New cables (even high-quality ones) benefit from a period of signal conditioning before reaching their optimum performance. The dielectric (insulation) around the conductors needs time to stabilise under the electromagnetic field created by signal flow. Rather than leaving this to you, we run cables on our Nordost Vidar burn-in machine before dispatch, up to the equivalent of 200 hours of use, in a fraction of the time. Your cable arrives performance-ready from the first listen.
Specification :
- Please note, you need to enter a quantity of 2 for a pair
- Conductors: Silver-plated, high purity OFC
- Configuration: Twisted pair
- Conductor Insulation: XLPE
- Shielding: Individually shielded positive and minus conductors. High density foil and 95% coverage metal braid. Translucent PVC outer jacket
- AWG: 10
- mm2: 5.26
- Diameter: 2 x 8.5mm
- Colour: Red/black or all black
- Ten Year Warranty
We use Royal Mail 1st Class services for our Standard Delivery.
Orders received before 4.30 pm Monday to Friday are usually dispatched the same day by FIRST CLASS post (unless premium postal or timed courier services are selected), subject to stock availability. This does not apply to custom-length cables and speaker cables as these require a longer timescale to terminate. This also excludes all cables selected for the burn-in service. Please note, we do not process orders on national holidays in the UK. Over 98% of our orders are delivered the next working day including Saturdays.
Standard delivery is usually within 2 working days, although 98% of all orders are delivered the next working day including Saturdays. In extreme cases, such as delivery to the Highlands and Islands, this may take 3 days.
All items are fully insured and come with an invoice from Future Shop. We use the Royal Mail for delivery of small packages and DPD Local or DHL for items that weigh over 2KG. Items over 2KG are fully insured and will usually be delivered within 48 hours of placing your order subject to stock availability. For international orders, we use FedEx or DHL services where customers have selected this option.
Please note, special orders for non-standard cable lengths may be subject to longer deliver time-scales. This may vary from manufacturer to manufacturer.
We offer 'Free delivery on orders over £99' subject to the following terms & conditions:
- Applies only to orders with £99 or more of items (including VAT at the UK rate), at Future Shop
- Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK (excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL).
- Applies only to deliveries to addresses within mainland UK and Northern Ireland addresses. Applies only to orders that are to be delivered to a single Mainland UK delivery address.
- You will not be eligible for free delivery on your order if any items are cancelled or returned for a refund, bringing the total order amount below £99. Where items are returned, the refund due will be the cost of the item less any postage costs.
- We reserve the right to change or discontinue 'Free delivery on orders over £99 promotion at any time.
- FREE DELIVERY FOR ORDERS OVER £99 OFFER DOES NOT APPLY TO TRADE CUSTOMERS.
UK Postal & Delivery Charges - FIRST CLASS
Free UK delivery on all orders over £99*
| Weight | Price (FIRST CLASS UK POSTAGE) |
| 0g - 1000g | £3.95 |
| 1000g - 1400g | £4.95 |
| 1400g - 1800g | £5.95 |
| 1800g - 2000g | £6.95 |
| 2000g - 3000g | £8.95 |
* Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK.
Free Delivery for orders over £99 excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL.
Special Delivery UK - Guaranteed Next Working Day
We have 99.9% of the UK covered With Royal Mail Next Day Special Delivery. We guarantee delivery to most UK addresses by 1pm the next working day. This includes Northern Ireland, Jersey and Guernsey. Some places take longer to deliver to but we still guarantee delivery within three working days by 5.30 PM.
Please note, Royal Mail Special Delivery for next working day may not be possible where non-standard cable lengths are ordered. If this is the case, the item will be shipped via The Royal Mail Special Delivery service as soon as the cable is custom made.
For orders weighing over 2KG, we reserve the right to ship items using Next Day Pre-Noon Courier Services where Royal Mail Special Delivery option has been selected.
Channel Islands & Northern Ireland
We accept orders from all Channel Islands including Alderney, Jersey, Guernsey and Sark. Unless you select a premium service, Items weighing under 2KG are delivered using our standard UK delivery option above. For items weighing over 2KG, a surcharge may be applied for all deliveries to the Channel Islands as well as Northern Ireland.
European Countries
Deliveries to EU member states are not subject to 20% VAT after December 31st 2020 and therefore the 20% VAT on items is automatically deducted when you log-in, register or proceed to place an order.
The customer will be liable for the VAT at the local VAT rate, duty on the import and the brokerage service fee if applicable. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 3 to 5 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 7-10 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 24 to 48 hours. FedEx orders must be received by 3.00pm for next day service to most destinations in Europe
- Federal Express International Economy - Item are usually delivered within 48 to 72 hours
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Worldwide - Excluding UK & Europe
Deliveries outside of the UK are not subject to 20% VAT and so the 20% tax on items is automatically deducted when you log-in, register or proceed to place an order.
If applicable, the customer will be liable for the taxes at the local tax rate, duty on the import and the brokerage service fee. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 7 to 10 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 15 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 48 hours. FedEx orders must be received by 3.00pm in order to ship items the same day, subject to stock availability
- Where the actual weight of the package significantly exceeds the shipping cost charged on orders, we may write to you for an additional shipping charge. For larger orders, items may be shipped in multiple packets at our discretion
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Write Your Own Review
Chord SignatureXL Speaker Cable - Factory Terminated
We are interested in your opinion of this product. let us and other customers know how you feel by filling in the comment field below. Your review will appear in this section within 3 working days.
Please do:
- - Write 50-300 words for the product
- - Comment on the products value and effectiveness
- - Tell us if you like the product, but most importantly explain why you like or dislike it
- - Mention related products and how this one rates by comparison
Nonetheless, be under no illusion that these are very fine cables but perhaps with a little more care they could have been even better.
The service from Futureshop was superb and the pre sale advice from Adam Senior was impressive
Thank you Future Shop gave me 96 hours professional burn-in service for free, I can save a lot of time to enjoy the music !
I think it's one of the best speaker cables.
Frequently Asked Questions
Free Premium Cable Burn-In Service: Experience the Power of Nordost VIDAR 2 Machine
We are thrilled to unveil our upgraded cable burn-in service, now featuring the cutting-edge VIDAR 2 burn-in machine. At Future Shop, we strive to provide the best possible experience for our customers, and this enhanced service is designed to unlock the true potential of your high-end cables. Read on to discover the exceptional benefits and advancements offered by the VIDAR 2 machine.
Please note: We are unable to burn-in cables with stripped bare ends or BFA plugs. Cable burn-in occurs after your order has been processed for the selected time period. For custom-length cables, burn-in takes place after termination by the manufacturer or our skilled engineers.
The Nordost VIDAR cable burn-in machine seamlessly combines three vital functions into a single operation:
- Neutralising charges around cables and insulation: The VIDAR 2 effectively dissipates any built-up charges, creating an optimal environment for signal transmission.
- Deep conditioning into the conductor core: With its wide band and profound conditioning capabilities, the machine induces significant changes in signal passage through the metal, resulting in enhanced performance.
- Ultrasonic surface conditioning of conductors: The VIDAR 2 employs ultrasonic technology to refine the conductor surface, further refining the signal quality.
In addition to all the advantages of its predecessor, the VIDAR 2 introduces remarkable improvements, including:
- Complex burn-in signal with wider bandwidth and richer content
- Enhanced directionality for cables
- FOUR burn-in zones - including a new digital zone for USB, Ethernet, and Coaxial (BNC) cables.
Using a proprietary blend of composite and complex signals, the VIDAR 2 ensures comprehensive cable conditioning. The signal consists of ultra-low and ultra-high frequencies, surpassing video frequency ranges. The signal effectively penetrates the core at ultra-low frequencies by oscillating throughout the cable while swiftly traversing the surface at ultra-high frequencies. This transmission methodology counters harmonics and heterodynes between the two complex waveforms, improving signal performance throughout all cable layers.
Furthermore, the circuitry design boasts a unique feature that drives electrons above the conductor into the dielectric or insulation area. This process neutralizes any electrical charges that may impact the signal integrity. With the Nordost VIDAR, we go beyond merely sending ping-pong signals along the cable; we also ensure a balanced signal flow from the centre core to the outer shield in interconnect cables.
What does all this mean for you?
Conditioning your cables with the Nordost VIDAR yields remarkable benefits, including enhanced sound staging, heightened detail reproduction, and a more captivating and musical presentation.
We offer our cable burn-in service as a complimentary offering at the discretion of Future Shop. While we strive to accommodate all burn-in requests for the specified time periods, please understand that during exceptionally busy periods, we may be unable to fulfill all demands due to the limited connections available on the Nordost VIDAR cable conditioning machines.
READ MORE ABOUT THE NORDOST VIDAR 2 BURN-IN TREATMENT
Did you find what you were looking for?
Write Your Own Review
Chord SignatureXL Speaker Cable - Factory Terminated
We are interested in your opinion of this product. let us and other customers know how you feel by filling in the comment field below. Your review will appear in this section within 3 working days.
Please do:
- - Write 50-300 words for the product
- - Comment on the products value and effectiveness
- - Tell us if you like the product, but most importantly explain why you like or dislike it
- - Mention related products and how this one rates by comparison
