The Ultra SS Bullet Spike is designed for use with the Ultra SS V2 for those with deep thick carpet. Do keep in mind that’s it’s difficult to tune the alignment of a loudspeaker within a 1/16” once the spikes have been fitted! Sold singly.

The Ultra Base can be connected to the Ultra SS V2, Ultra II V2, Ultra 5 V2, and directly to any component in a system. One 1/4-20 x 5/8″ set screw is included with each Ultra Base. The 1/4-20 adapter listed below allows connection of the Ultra Base to the beveled lower section of the Ultra 5. The added height will provide more ventilation space under an amplifier if needed. The Ultra Base can also spread the mass of whatever is being supported over a larger area adding stability in some applications. Adding the Ultra Base to any Stillpoint can increase the performance of that Stillpoint significantly. Sold singly.

The Ultra 5 V2 isolation feet approach the higher end of performance achieved by any Stillpoints products. Designed for use with components or floorstanding speakers, the Ultra 5 V2 contains four "technology pockets" in each unit and can be used without the Ultra Base on a perfectly level floor. The beveled base aids the adjustment of speakers once they have been fitted. Sold singly.

The Ultra 6 V2 are Stillpoints' flagship isolation feet for components (not designed for use with floorstanding speakers), containing multiple "technology pockets" to dissipate mechanical vibrations from your equipment and allow it to achieve its full potential. The Ultra 6 V2 is available with the Ultra Base if not being used directly on a Stillpoints ESS rack or component stand.

The Ultra 7 V2 are the flagship isolation feet, representing the pinnacle of performance that can be achieved by any Stillpoints product designed to isolate floorstanding speakers. These isolation feet are available to the public after being developed with the manufacturers of high-end loudspeakers, and do not require the use of any Ultra Base or Ultra Bullets.

The Rail Grid was designed by Stillpoints to offer an improvement upon the existing Acrylic Shelf and X Grid - offering greater isolation than the acrylic version and far greater flexibility than the X Grid - the two Stillpoints fitted on each rail can be adjusted along the entire length of the rail, and the Rail Grid can easily replace any existing ESS Rack shelves. Isolation feet NOT included.

Positioned under any piece of equipment, Seismic Isolation Pods will dramatically improve the sound by breaking the acoustic connection between the audio system and structural vibrations in the room.

Especially designed to isolate individual components such as CD players, turntables, DACs, preamplifiers, power amplifiers and streamers from vibration.

Seismic Sink Corners provide vibration isolation for almost any equipment rack, stand, platforms or speaker. Each Corner is a small platform suspended from two Seismic Load Cells™ on which the equipment legs or spikes are placed.

Designed as a range to accommodate any size and weight of speaker – standmount plus stand, floorstander or subwoofer – the Seismic Podium breaks the acoustic connection between the floor and the speaker, preventing the passage of deleterious vibrations both to and from the speaker cabinets.

The Stillpoints Ultra I E V2 2024 improves on the Ultra I V2 with 25–30% better performance, more natural sound, and superior high-frequency response. Ideal under electronics, it features an upgraded internal design and can be paired with the Ultra I Base for even greater sonic benefits.