Wall Plates
Analogue audio, digital, HDMI, speaker and modular wall plates from Atlas, Furutech and QED, for terminating installed cable runs neatly.
Shop by Brand
Finishing an installed cable run
A wall plate terminates a cable run inside the wall and gives you a proper connector on the outside. It protects the cable, keeps the connection serviceable, and means equipment can be moved without pulling on cable buried in plasterwork.
Every plate adds two connections to the signal path, so use good quality terminals and make them off properly. Speaker plates should use binding posts rather than spring clips, and the terminals need to accept the cable gauge you are running. Modular plates let you mix connector types on one plate, which suits an AV wall where HDMI, speaker and network cable all arrive at the same point.
Plan plate positions around the equipment layout rather than the room layout. Allow enough slack behind the plate to pull it forward for servicing, and use a back box deep enough for the connectors and the bend radius of the cable, which is a common problem with HDMI. If you are specifying plates for an installation, tell us what is being terminated at each position.
-
£95.83Ex. VATFurutech FP-SWS Gold is a high end single schuko mains socket that is made from Poly carbonate, nylon/fiberglass body and use's Gold-plasted non-magnetic pure copper conductors. -
£301.14Ex. VAT
The PUV-1510TXWP Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments.
-
£57.50Ex. VATThe Furutech FT-UKS(G) is a high-end UK mains socket featuring gold-plated Alpha pure copper conductors at 1.2mm thickness, a patent-pending pressure plate design, and Furutech's two-stage Alpha cryogenic and demagnetisation treatment for improved AC power transfer.
-
Atlona HD Distribution
Atlona HDWP-RSNET UK HDBaseT RX for HDMI 2-Gang UK Wall Plate w/ Ethernet, RS-232 and IRSKU: AT-HDWP-RSNET-1
£221.33Ex. VATPlease Note: This product has been discontinued, once out stock is gone, it's gone!!
HDWP-RSNET-UK receiver wall plate features complete Ethernet, RS-232, and IR control compatible with all major control systems. Networks signals can be routed for native applications on a smart TV without an extra cable.
-
Blustream
Blustream DA11ABL-WP-EU-V2 Bluetooth & Analogue Audio Dante® Wall PlateSKU: DA11ABL-WP-EU-V2
£426.64Ex. VATTransform your audio experience with the Blustream DA11ABL-WP-EU-V2 Bluetooth & Analogue Audio Dante® Wall Plate. Seamlessly integrate Bluetooth and analogue audio into your digital Dante® networked audio system. This plug & play device offers effortless setup, powered by PoE or a 12V power supply for versatility.
-
£291.67Ex. VATTake control with this Wallplate Control Panel featuring (3) programmable RS232 and (2) IR connectors. Perfect for managing matrix switchers, projectors, and screens in boardrooms, classrooms, or showrooms. -
£382.50Ex. VATThe SEADA SDCP10 is a 10-button IP-enabled wall plate controller with PoE support. Ideal for AV control, it operates via LAN or RS232 and offers easy configuration and firmware updates through a web UI. -
£400.00Ex. VATThe SDCP7 is a PoE-enabled wallplate control panel with 6 programmable buttons, a volume knob, and multiple connectivity options. Designed for seamless AV control via RS232, IR, and relay ports, it's ideal for classrooms, boardrooms, and showrooms. -
£450.00Ex. VATThe SEADA SDCP10 is a 10-button IP-enabled wall plate controller with PoE support. Ideal for AV control, it operates via LAN or RS232 and offers easy configuration and firmware updates through a web UI. -
£450.00Ex. VATThe 4K HDBaseT Wall-Plate offers HDMI, DP, and VGA with audio inputs in a compact unit. It extends signals up to 70m at 1080p and 40m at 4K over a single Cat6/6a cable. With support for 4K30, auto/manual switching, 24V POC, and two-way RS-232, it’s perfect for professional AV setups. -
NEWFurutech
Furutech FP-SWS NCF Plus High Performance Schuko Wall Socket - RhodiumSKU: FP-SWS NCF Plus R
£190.00Ex. VATThe Furutech FT-SWS NCF Plus (R) is the latest version of Furutech's reference Schuko wall socket, rated 16A at 250V. It uses non-magnetic rhodium-plated Alpha pure copper conductors held by a stainless steel spring for constant contact pressure, with NCF anti-resonance damping through the insulation and a carbon fibre finished Zn-Mg alloy front plate. Please note this is a Schuko outlet, not a UK socket.
