XLR Balanced

Balanced XLR interconnects for equipment with true balanced circuitry, and for runs where noise rejection matters more than cable length.

116 products Award Winning Dealer Since 2013 Free expert consultation

When balanced is the right connection

A balanced connection carries the signal twice, once inverted, and the receiving component cancels anything common to both. Noise picked up along the run disappears in that cancellation, which is why XLR is standard in studios and why it holds up over long distances.

The benefit depends on the equipment rather than the cable. Where both components are balanced from input to output, XLR usually gives a lower noise floor and often a slightly different tonal balance from the same manufacturer's RCA equivalent. Where one component simply provides an XLR socket on a single-ended circuit, the advantage largely disappears and RCA may be the better connection. Check the manual or ask the manufacturer if you are unsure.

XLR also carries a higher output level on most equipment, so expect to use less volume for the same loudness. Cables here can usually be made to order in the length you need with no making charge, and burn-in is available free on request. Comparing XLR against your existing RCA run in your own system is the only test that settles it.

4.95/5 from 20,731+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

113 of 113 products

Now Shopping by New Clear all
  • Furutech FA-13S Alpha Balanced Interconnect Cable - Custom Length
    NEW

    Furutech

    Furutech FA-13S Alpha Balanced Interconnect Cable Pair

    SKU: FA-13S

    £80.90
    Ex. VAT

    The Furutech FA-13S is a balanced audio cable that Future Shop make to order as a stereo pair from 1m to 10m, with RCA or XLR plugs, using 16 AWG solid-core Alpha μ-OFC conductors.

    View Available Worldwide Shipping Available
  • Furutech FA-AlphaS21 Alpha OCC Balanced Interconnect Cable - Custom Length
    NEW

    Furutech

    Furutech FA-AlphaS21 Alpha OCC Balanced Interconnect Cable Pair

    SKU: FA-AlphaS21

    £91.40
    Ex. VAT

    The Furutech FA-αS21 is a balanced Alpha OCC audio cable that Future Shop make to order as a stereo pair from 1m to 10m, with RCA or XLR plugs, using 30-strand conductors and a damping cotton filler.

    View Available Worldwide Shipping Available
  • Furutech FA-AlphaS22 Alpha OCC Balanced Interconnect Cable - Custom Length
    NEW

    Furutech

    Furutech FA-AlphaS22 Alpha OCC Balanced Interconnect Cable Pair

    SKU: FA-AlphaS22

    £114.80
    Ex. VAT

    The Furutech FA-αS22 is a balanced Alpha OCC audio cable that Future Shop make to order as a stereo pair from 1m to 10m, with RCA or XLR plugs, using 60-strand conductors and a carbon-damped inner sheath.

    View Available Worldwide Shipping Available
  • Chord ShawlineX Aray XLR/RCA Analogue Audio Cable Pair
    NEW

    Chord Company

    Chord ShawlineX Aray XLR/RCA Analogue Audio Cable Pair

    SKU: ShawlineX Aray XLR/RCA

    From
    £324.00 £360.00
    Inc. VAT ✓ Save £36.00

    The Chord ShawlineX Aray XLR/RCA Analogue Audio Cable Pair links RCA and balanced XLR components, with ARAY silver-plated copper conductors, XLPE insulation and foil shielding, hand built in the UK from 1m to 5m.

    View Available Free delivery
  • Furutech Origin Line NCF XLR High-Performance Balanced Interconnect - 1.2m Pair
    NEW

    Furutech

    Furutech Origin Line NCF XLR High-Performance Balanced Interconnect - 1.2m Pair

    SKU: Origin Line NCF XLR

    £750.00
    Ex. VAT
    The Furutech Origin Line NCF (XLR) is a 1.2m stereo pair of balanced interconnects with α (Alpha) OCC conductors, double-layer shielding, NCF resonance damping and rhodium-plated CF-601M-N1(R) and CF-602F-N1(R) XLR plugs.
    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

RCA cables carry unbalanced signals, while XLR cables carry balanced signals that reject noise and interference. XLR is preferred for longer runs and professional-grade audio systems.

If you have a system which accepts both XLRs and RCAs, we would typically recommend using the XLR connections, as they offer a lower noise floor. However, if you system is pre-dominantly RCAs, then we would recommend sticking with RCAs throughout your system, rather than mixing and matching.

Loading...
Loading...
loader
Loading...