Blustream DA11AEN-V2 Dante® Audio Analogue Encoder
Usage Guide
Matrix / Extender
Connection Guide
Ethernet Plug
Our Hi-Fi specialists give free, honest advice — no commission, ever. Contact us by email or phone and we'll help you find the right cable for your system.
Item code: DA11AEN-V2
Inc. VAT (20%) · Ex. VAT: £174.33 Ex. VAT · Inc. VAT (20%):
Lowest price in the last 30 days:
Request to Price Match
If you've seen a better offer for this product, we will endeavour to match it. The competing offer must be on brand-new boxed items, and in stock from another UK Online Authorised Retailer (excluding marketplaces). Price match quotations are valid for 7 days.
SPEAKER CABLES:
A quantity of 2 means you will receive a pair of speaker cables e.g. for your front left and front right speakers. By entering a quantity of 1, you will get a cable for a single speaker e.g. centre speaker and this option also enables you to vary the length (and termination) of your cable for each speaker.
OTHER CABLES:
A quantity of 1 means you will receive a single cable in the case of aerial, satellite, subwoofer, digital coaxial & optical cables and a pair of cables in the case of 2 rca to 2 rca analogue audio cables.
NON-CABLE PRODUCTS:
A quantity of 1 means you will receive 1 of the specified products.
Order before 4pm (Mon–Fri) for same-day dispatch
Blustream DA11AEN-V2 Dante® Audio Analogue Encoder
The Blustream DA11AEN-V2 is a Dante® audio analogue encoder that converts a balanced or unbalanced two-channel analogue signal into a Dante digital audio stream, so a source with no network audio of its own can join a Dante system. Mixing consoles, amplifiers, computers and the analogue outputs of Blustream matrix and distribution products can all be brought onto the network this way, then routed to Dante decoders and other Dante devices on the same network. The DA11AEN-V2 is the natural partner to Blustream's DA11ADE-V2 decoder, and Blustream's own example system pairs the two through a network switch to carry stereo analogue audio from one location to another over standard CAT cabling.
The DA11AEN-V2 supports sample rates of 44.1, 48, 88.2 and 96kHz at 16, 24 or 32-bit, and its device latency can be set anywhere from 2 to 10ms in Audinate's Dante Controller software, so timing can be matched to the needs of the installation and the network it runs on. Support for AES67 RTP audio transport allows the encoder to work with AES67-compatible audio systems as well as Dante devices. A built-in web interface handles control and configuration of the unit, including the input sensitivity of each channel and the network settings, while Dante Controller discovers the DA11AEN-V2 automatically on the network and handles audio routing between encoders and decoders.
Connection is simple. A 6-pin Phoenix connector accepts both audio channels, each wired as a balanced or unbalanced input, and a single RJ45 socket connects the encoder to a 100Mbps Dante network. The DA11AEN-V2 is a plug and play device that takes its power from any Class 0 IEEE 802.3af PoE network switch, so one network cable carries both the audio and the power. Where the switch does not provide PoE, a 12V 1A DC supply can be connected to a 2-pin Phoenix input instead, using Blustream's PS121PH power supply, which is sold separately. The compact casing measures 120mm long, 47mm wide and 26mm high.
What Blustream say about the DA11AEN-V2
Our DA11AEN-V2 has been designed to encode unbalanced or balanced 2ch analogue audio to Dante® digital signals.
The DA11AEN-V2 allows any non-Dante® audio source such as mixing consoles, amplifiers, computers and Blustream Matrix products or distribution products to be connected as a source within a Dante® network.
The DA11AEN-V2 is a plug & play device that is powered using either PoE (Power Over Ethernet) from any PoE network switch or via a local 12V power supply input.
The DA11AEN-V2 also supports AES67 RTP audio transport. The inbuilt web interface module can be used for configuration and control of the device.
Key Features
- Encodes unbalanced or balanced 2ch analogue audio to Dante® digital signals
- Supports 44.1, 48, 88.2 & 96 KHz sample rates @ 16/24/32 Bit
- Configurable Dante® device latency (supports 2-10ms configurable using Dante® Controller)
- Supports AES67 RTP audio transport
- Web interface module for control and configuration of the device
- Features Class 0 802.3af PoE for powering of product from any PoE switch
- Local 12V power supply input for when network switch does not support PoE*
* PS121PH power supply sold separately
Specifications
General
- Brand: Blustream
- Model: DA11AEN-V2
- Product Type: Dante® Audio Analogue Encoder
- Dante Platform: DEP
Audio
- Audio Input: 2-channel balanced or unbalanced analogue
- Sample Rates: 44.1kHz, 48kHz, 88.2kHz and 96kHz
- Bit Depth: 16, 24 and 32-bit
- Audio Transport: Dante® and AES67 RTP
- Device Latency: 2 to 10ms, configurable in Dante® Controller
Network and Control
- Network: 100Mbps Dante® network
- Configuration and Control: built-in web interface
- Web Interface Settings: per-channel input sensitivity and network settings
- Routing and Device Configuration: Audinate Dante® Controller
- IP Addressing: DHCP by default, link-local address when no DHCP server is present
Connectivity
- Audio Input: 1 x 6-pin Phoenix connector (2ch balanced / unbalanced analogue audio)
- Dante® Output: 1 x RJ45, female (100Mbps Dante® network, PoE)
- Power Input: 1 x 2-pin Phoenix connector (12V DC)
Power
- PoE: Class 0 IEEE 802.3af PoE PD
- Local Power: 12V/1A DC via 2-pin Phoenix connector
- Optional Power Supply: Blustream PS121PH (sold separately)
Environmental
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Weight and Dimensions
- Casing Dimensions (L x W x H): 120mm x 47mm x 26mm
- Shipping Weight: 0.3 kg
In the Box
- 1 x DA11AEN-V2
- 1 x Quick Reference Guide
About Blustream
Australian-founded maker of HDMI matrices, HDBaseT extenders and AV distribution products for home and commercial installs.
Blustream started in Melbourne, Australia, and now has offices in the UK and the United States as well. It specialises in HDBaseT matrices and extenders, and its range also covers HDMI switching, audio converters, Dante audio, amplifiers and video over IP. You can use it to route sources to screens across a building.
Read more about BlustreamShow less
HDMI matrices and switches route your sources
Blustream's HDMI matrices and switches let you send several sources to several displays. The range includes 4x4 matrices such as the MX44AB-V2 and smaller switches such as the SW21AB-V2 and SW41AB-V2. A presentation switch, the MFP112, suits meeting rooms. Check the specification for the inputs and outputs.
HDBaseT extenders carry signals over distance
HDBaseT sends video, audio and control over a single network cable, which lets you place a display well away from its source. Blustream lists receivers such as the RX70AMP, which includes an amplifier, and extender sets such as the HEX100HDVGA-KIT.
Converters and cables fill the gaps
Audio extractors and converters, including the CAT100AU, DAC12AU, HD11AU, ADC11AU and DIG11AU, let you pull audio out of an HDMI signal or convert its format. Micro HDMI cables are also available, which helps when a source has only a micro connector.
Specifications
General
- Brand: Blustream
- Model: DA11AEN-V2
- Product Type: Dante® Audio Analogue Encoder
- Dante Platform: DEP
Audio
- Audio Input: 2-channel balanced or unbalanced analogue
- Sample Rates: 44.1kHz, 48kHz, 88.2kHz and 96kHz
- Bit Depth: 16, 24 and 32-bit
- Audio Transport: Dante® and AES67 RTP
- Device Latency: 2 to 10ms, configurable in Dante® Controller
Network and Control
- Network: 100Mbps Dante® network
- Configuration and Control: built-in web interface
- Web Interface Settings: per-channel input sensitivity and network settings
- Routing and Device Configuration: Audinate Dante® Controller
- IP Addressing: DHCP by default, link-local address when no DHCP server is present
Connectivity
- Audio Input: 1 x 6-pin Phoenix connector (2ch balanced / unbalanced analogue audio)
- Dante® Output: 1 x RJ45, female (100Mbps Dante® network, PoE)
- Power Input: 1 x 2-pin Phoenix connector (12V DC)
Power
- PoE: Class 0 IEEE 802.3af PoE PD
- Local Power: 12V/1A DC via 2-pin Phoenix connector
- Optional Power Supply: Blustream PS121PH (sold separately)
Environmental
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Weight and Dimensions
- Casing Dimensions (L x W x H): 120mm x 47mm x 26mm
- Shipping Weight: 0.3 kg
In the Box
- 1 x DA11AEN-V2
- 1 x Quick Reference Guide
We use Royal Mail 1st Class services for our Standard Delivery.
Orders received before 4.30 pm Monday to Friday are usually dispatched the same day by FIRST CLASS post (unless premium postal or timed courier services are selected), subject to stock availability. This does not apply to custom-length cables and speaker cables as these require a longer timescale to terminate. This also excludes all cables selected for the burn-in service. Please note, we do not process orders on national holidays in the UK. Over 98% of our orders are delivered the next working day including Saturdays.
Standard delivery is usually within 2 working days, although 98% of all orders are delivered the next working day including Saturdays. In extreme cases, such as delivery to the Highlands and Islands, this may take 3 days.
All items are fully insured and come with an invoice from Future Shop. We use the Royal Mail for delivery of small packages and DPD Local or DHL for items that weigh over 2KG. Items over 2KG are fully insured and will usually be delivered within 48 hours of placing your order subject to stock availability. For international orders, we use FedEx or DHL services where customers have selected this option.
Please note, special orders for non-standard cable lengths may be subject to longer deliver time-scales. This may vary from manufacturer to manufacturer.
We offer 'Free delivery on orders over £99' subject to the following terms & conditions:
- Applies only to orders with £99 or more of items (including VAT at the UK rate), at Future Shop
- Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK (excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL).
- Applies only to deliveries to addresses within mainland UK and Northern Ireland addresses. Applies only to orders that are to be delivered to a single Mainland UK delivery address.
- You will not be eligible for free delivery on your order if any items are cancelled or returned for a refund, bringing the total order amount below £99. Where items are returned, the refund due will be the cost of the item less any postage costs.
- We reserve the right to change or discontinue 'Free delivery on orders over £99 promotion at any time.
- FREE DELIVERY FOR ORDERS OVER £99 OFFER DOES NOT APPLY TO TRADE CUSTOMERS.
UK Postal & Delivery Charges - FIRST CLASS
Free UK delivery on all orders over £99*
| Weight | Price (FIRST CLASS UK POSTAGE) |
| 0g - 1000g | £3.95 |
| 1000g - 1400g | £4.95 |
| 1400g - 1800g | £5.95 |
| 1800g - 2000g | £6.95 |
| 2000g - 3000g | £8.95 |
* Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK.
Free Delivery for orders over £99 excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL.
Special Delivery UK - Guaranteed Next Working Day
We have 99.9% of the UK covered With Royal Mail Next Day Special Delivery. We guarantee delivery to most UK addresses by 1pm the next working day. This includes Northern Ireland, Jersey and Guernsey. Some places take longer to deliver to but we still guarantee delivery within three working days by 5.30 PM.
Please note, Royal Mail Special Delivery for next working day may not be possible where non-standard cable lengths are ordered. If this is the case, the item will be shipped via The Royal Mail Special Delivery service as soon as the cable is custom made.
For orders weighing over 2KG, we reserve the right to ship items using Next Day Pre-Noon Courier Services where Royal Mail Special Delivery option has been selected.
Channel Islands & Northern Ireland
We accept orders from all Channel Islands including Alderney, Jersey, Guernsey and Sark. Unless you select a premium service, Items weighing under 2KG are delivered using our standard UK delivery option above. For items weighing over 2KG, a surcharge may be applied for all deliveries to the Channel Islands as well as Northern Ireland.
European Countries
Deliveries to EU member states are not subject to 20% VAT after December 31st 2020 and therefore the 20% VAT on items is automatically deducted when you log-in, register or proceed to place an order.
The customer will be liable for the VAT at the local VAT rate, duty on the import and the brokerage service fee if applicable. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 3 to 5 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 7-10 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 24 to 48 hours. FedEx orders must be received by 3.00pm for next day service to most destinations in Europe
- Federal Express International Economy - Item are usually delivered within 48 to 72 hours
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Worldwide - Excluding UK & Europe
Deliveries outside of the UK are not subject to 20% VAT and so the 20% tax on items is automatically deducted when you log-in, register or proceed to place an order.
If applicable, the customer will be liable for the taxes at the local tax rate, duty on the import and the brokerage service fee. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 7 to 10 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 15 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 48 hours. FedEx orders must be received by 3.00pm in order to ship items the same day, subject to stock availability
- Where the actual weight of the package significantly exceeds the shipping cost charged on orders, we may write to you for an additional shipping charge. For larger orders, items may be shipped in multiple packets at our discretion
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Frequently Asked Questions
Blustream DA11AEN-V2 Dante® Audio Analogue Encoder
The Blustream DA11AEN-V2 is a Dante® audio analogue encoder that converts a balanced or unbalanced two-channel analogue signal into a Dante digital audio stream, so a source with no network audio of its own can join a Dante system. Mixing consoles, amplifiers, computers and the analogue outputs of Blustream matrix and distribution products can all be brought onto the network this way, then routed to Dante decoders and other Dante devices on the same network. The DA11AEN-V2 is the natural partner to Blustream's DA11ADE-V2 decoder, and Blustream's own example system pairs the two through a network switch to carry stereo analogue audio from one location to another over standard CAT cabling.
The DA11AEN-V2 supports sample rates of 44.1, 48, 88.2 and 96kHz at 16, 24 or 32-bit, and its device latency can be set anywhere from 2 to 10ms in Audinate's Dante Controller software, so timing can be matched to the needs of the installation and the network it runs on. Support for AES67 RTP audio transport allows the encoder to work with AES67-compatible audio systems as well as Dante devices. A built-in web interface handles control and configuration of the unit, including the input sensitivity of each channel and the network settings, while Dante Controller discovers the DA11AEN-V2 automatically on the network and handles audio routing between encoders and decoders.
Connection is simple. A 6-pin Phoenix connector accepts both audio channels, each wired as a balanced or unbalanced input, and a single RJ45 socket connects the encoder to a 100Mbps Dante network. The DA11AEN-V2 is a plug and play device that takes its power from any Class 0 IEEE 802.3af PoE network switch, so one network cable carries both the audio and the power. Where the switch does not provide PoE, a 12V 1A DC supply can be connected to a 2-pin Phoenix input instead, using Blustream's PS121PH power supply, which is sold separately. The compact casing measures 120mm long, 47mm wide and 26mm high.
What Blustream say about the DA11AEN-V2
Our DA11AEN-V2 has been designed to encode unbalanced or balanced 2ch analogue audio to Dante® digital signals.
The DA11AEN-V2 allows any non-Dante® audio source such as mixing consoles, amplifiers, computers and Blustream Matrix products or distribution products to be connected as a source within a Dante® network.
The DA11AEN-V2 is a plug & play device that is powered using either PoE (Power Over Ethernet) from any PoE network switch or via a local 12V power supply input.
The DA11AEN-V2 also supports AES67 RTP audio transport. The inbuilt web interface module can be used for configuration and control of the device.
Key Features
- Encodes unbalanced or balanced 2ch analogue audio to Dante® digital signals
- Supports 44.1, 48, 88.2 & 96 KHz sample rates @ 16/24/32 Bit
- Configurable Dante® device latency (supports 2-10ms configurable using Dante® Controller)
- Supports AES67 RTP audio transport
- Web interface module for control and configuration of the device
- Features Class 0 802.3af PoE for powering of product from any PoE switch
- Local 12V power supply input for when network switch does not support PoE*
* PS121PH power supply sold separately
Specifications
General
- Brand: Blustream
- Model: DA11AEN-V2
- Product Type: Dante® Audio Analogue Encoder
- Dante Platform: DEP
Audio
- Audio Input: 2-channel balanced or unbalanced analogue
- Sample Rates: 44.1kHz, 48kHz, 88.2kHz and 96kHz
- Bit Depth: 16, 24 and 32-bit
- Audio Transport: Dante® and AES67 RTP
- Device Latency: 2 to 10ms, configurable in Dante® Controller
Network and Control
- Network: 100Mbps Dante® network
- Configuration and Control: built-in web interface
- Web Interface Settings: per-channel input sensitivity and network settings
- Routing and Device Configuration: Audinate Dante® Controller
- IP Addressing: DHCP by default, link-local address when no DHCP server is present
Connectivity
- Audio Input: 1 x 6-pin Phoenix connector (2ch balanced / unbalanced analogue audio)
- Dante® Output: 1 x RJ45, female (100Mbps Dante® network, PoE)
- Power Input: 1 x 2-pin Phoenix connector (12V DC)
Power
- PoE: Class 0 IEEE 802.3af PoE PD
- Local Power: 12V/1A DC via 2-pin Phoenix connector
- Optional Power Supply: Blustream PS121PH (sold separately)
Environmental
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Weight and Dimensions
- Casing Dimensions (L x W x H): 120mm x 47mm x 26mm
- Shipping Weight: 0.3 kg
In the Box
- 1 x DA11AEN-V2
- 1 x Quick Reference Guide
About Blustream
Australian-founded maker of HDMI matrices, HDBaseT extenders and AV distribution products for home and commercial installs.
Blustream started in Melbourne, Australia, and now has offices in the UK and the United States as well. It specialises in HDBaseT matrices and extenders, and its range also covers HDMI switching, audio converters, Dante audio, amplifiers and video over IP. You can use it to route sources to screens across a building.
Read more about BlustreamShow less
HDMI matrices and switches route your sources
Blustream's HDMI matrices and switches let you send several sources to several displays. The range includes 4x4 matrices such as the MX44AB-V2 and smaller switches such as the SW21AB-V2 and SW41AB-V2. A presentation switch, the MFP112, suits meeting rooms. Check the specification for the inputs and outputs.
HDBaseT extenders carry signals over distance
HDBaseT sends video, audio and control over a single network cable, which lets you place a display well away from its source. Blustream lists receivers such as the RX70AMP, which includes an amplifier, and extender sets such as the HEX100HDVGA-KIT.
Converters and cables fill the gaps
Audio extractors and converters, including the CAT100AU, DAC12AU, HD11AU, ADC11AU and DIG11AU, let you pull audio out of an HDMI signal or convert its format. Micro HDMI cables are also available, which helps when a source has only a micro connector.
Specifications
General
- Brand: Blustream
- Model: DA11AEN-V2
- Product Type: Dante® Audio Analogue Encoder
- Dante Platform: DEP
Audio
- Audio Input: 2-channel balanced or unbalanced analogue
- Sample Rates: 44.1kHz, 48kHz, 88.2kHz and 96kHz
- Bit Depth: 16, 24 and 32-bit
- Audio Transport: Dante® and AES67 RTP
- Device Latency: 2 to 10ms, configurable in Dante® Controller
Network and Control
- Network: 100Mbps Dante® network
- Configuration and Control: built-in web interface
- Web Interface Settings: per-channel input sensitivity and network settings
- Routing and Device Configuration: Audinate Dante® Controller
- IP Addressing: DHCP by default, link-local address when no DHCP server is present
Connectivity
- Audio Input: 1 x 6-pin Phoenix connector (2ch balanced / unbalanced analogue audio)
- Dante® Output: 1 x RJ45, female (100Mbps Dante® network, PoE)
- Power Input: 1 x 2-pin Phoenix connector (12V DC)
Power
- PoE: Class 0 IEEE 802.3af PoE PD
- Local Power: 12V/1A DC via 2-pin Phoenix connector
- Optional Power Supply: Blustream PS121PH (sold separately)
Environmental
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -20°C to 60°C (-4°F to 140°F)
Weight and Dimensions
- Casing Dimensions (L x W x H): 120mm x 47mm x 26mm
- Shipping Weight: 0.3 kg
In the Box
- 1 x DA11AEN-V2
- 1 x Quick Reference Guide
We use Royal Mail 1st Class services for our Standard Delivery.
Orders received before 4.30 pm Monday to Friday are usually dispatched the same day by FIRST CLASS post (unless premium postal or timed courier services are selected), subject to stock availability. This does not apply to custom-length cables and speaker cables as these require a longer timescale to terminate. This also excludes all cables selected for the burn-in service. Please note, we do not process orders on national holidays in the UK. Over 98% of our orders are delivered the next working day including Saturdays.
Standard delivery is usually within 2 working days, although 98% of all orders are delivered the next working day including Saturdays. In extreme cases, such as delivery to the Highlands and Islands, this may take 3 days.
All items are fully insured and come with an invoice from Future Shop. We use the Royal Mail for delivery of small packages and DPD Local or DHL for items that weigh over 2KG. Items over 2KG are fully insured and will usually be delivered within 48 hours of placing your order subject to stock availability. For international orders, we use FedEx or DHL services where customers have selected this option.
Please note, special orders for non-standard cable lengths may be subject to longer deliver time-scales. This may vary from manufacturer to manufacturer.
We offer 'Free delivery on orders over £99' subject to the following terms & conditions:
- Applies only to orders with £99 or more of items (including VAT at the UK rate), at Future Shop
- Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK (excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL).
- Applies only to deliveries to addresses within mainland UK and Northern Ireland addresses. Applies only to orders that are to be delivered to a single Mainland UK delivery address.
- You will not be eligible for free delivery on your order if any items are cancelled or returned for a refund, bringing the total order amount below £99. Where items are returned, the refund due will be the cost of the item less any postage costs.
- We reserve the right to change or discontinue 'Free delivery on orders over £99 promotion at any time.
- FREE DELIVERY FOR ORDERS OVER £99 OFFER DOES NOT APPLY TO TRADE CUSTOMERS.
UK Postal & Delivery Charges - FIRST CLASS
Free UK delivery on all orders over £99*
| Weight | Price (FIRST CLASS UK POSTAGE) |
| 0g - 1000g | £3.95 |
| 1000g - 1400g | £4.95 |
| 1400g - 1800g | £5.95 |
| 1800g - 2000g | £6.95 |
| 2000g - 3000g | £8.95 |
* Free Delivery on orders over £99 utilises Royal Mail First Class postal service for items weighing under 2KG. For items weighing over 2KG, we use DPD or DHL next working day services which deliver from 9.00am to 6pm within mainland UK.
Free Delivery for orders over £99 excludes Royal Mail Special Delivery Services and timed next day delivery services by DPD or DHL.
Special Delivery UK - Guaranteed Next Working Day
We have 99.9% of the UK covered With Royal Mail Next Day Special Delivery. We guarantee delivery to most UK addresses by 1pm the next working day. This includes Northern Ireland, Jersey and Guernsey. Some places take longer to deliver to but we still guarantee delivery within three working days by 5.30 PM.
Please note, Royal Mail Special Delivery for next working day may not be possible where non-standard cable lengths are ordered. If this is the case, the item will be shipped via The Royal Mail Special Delivery service as soon as the cable is custom made.
For orders weighing over 2KG, we reserve the right to ship items using Next Day Pre-Noon Courier Services where Royal Mail Special Delivery option has been selected.
Channel Islands & Northern Ireland
We accept orders from all Channel Islands including Alderney, Jersey, Guernsey and Sark. Unless you select a premium service, Items weighing under 2KG are delivered using our standard UK delivery option above. For items weighing over 2KG, a surcharge may be applied for all deliveries to the Channel Islands as well as Northern Ireland.
European Countries
Deliveries to EU member states are not subject to 20% VAT after December 31st 2020 and therefore the 20% VAT on items is automatically deducted when you log-in, register or proceed to place an order.
The customer will be liable for the VAT at the local VAT rate, duty on the import and the brokerage service fee if applicable. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 3 to 5 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 7-10 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 24 to 48 hours. FedEx orders must be received by 3.00pm for next day service to most destinations in Europe
- Federal Express International Economy - Item are usually delivered within 48 to 72 hours
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Worldwide - Excluding UK & Europe
Deliveries outside of the UK are not subject to 20% VAT and so the 20% tax on items is automatically deducted when you log-in, register or proceed to place an order.
If applicable, the customer will be liable for the taxes at the local tax rate, duty on the import and the brokerage service fee. This may need to be paid in advance to your local Customs & Excise office or the delivery company before your order can be delivered.
We offer the following shipping services:
- Royal Mail First Class International Airmail Services - Items are usually delivered within 7 to 10 working days
- Royal Mail Standard International Mail Services - Items are usually delivered within 15 working days
- DHL Express International - Items are usually delivered within 24 to 48 hours. DHL orders must be received by 3:30pm for next day service to most destinations in Europe
- Federal Express International Priority - Items are usually delivered within 48 hours. FedEx orders must be received by 3.00pm in order to ship items the same day, subject to stock availability
- Where the actual weight of the package significantly exceeds the shipping cost charged on orders, we may write to you for an additional shipping charge. For larger orders, items may be shipped in multiple packets at our discretion
We reserve the right to change your shipping method without notification if you select a method that we cannot use for your shipment (for instance, we cannot ship via postal services for items over 2 Kg to International destinations). If we need to change your shipping method, we will choose the least expensive shipping method for your order.
Write Your Own Review
Blustream DA11AEN-V2 Dante® Audio Analogue Encoder
We are interested in your opinion. Let us and other customers know how you feel by filling in the comment field below.
No reviews yet. Be the first to review this product.
Frequently Asked Questions
Did you find what you were looking for?
Write Your Own Review
Blustream DA11AEN-V2 Dante® Audio Analogue Encoder
We are interested in your opinion of this product. let us and other customers know how you feel by filling in the comment field below. Your review will appear in this section within 3 working days.
Please do:
- - Write 50-300 words for the product
- - Comment on the products value and effectiveness
- - Tell us if you like the product, but most importantly explain why you like or dislike it
- - Mention related products and how this one rates by comparison
