Furutech
Japanese maker of connectors, plugs and power products, founded in 1988 in Tokyo. Furutech supply components to other cable manufacturers as well as selling under their own name, and their plugs are found across the industry.
About Furutech
Quick Access
The company whose connectors are inside other brands' cables
Furutech occupy an unusual position. Founded in Tokyo in 1988, they sell finished cables and power products under their own name, but they are just as significant as a component supplier: a large number of cable brands terminate their products with Furutech plugs, sometimes saying so and sometimes not.
That gives the company a different set of priorities from a cable house. The focus is on the connector itself, on the metallurgy, the plating, the contact pressure and what happens at the joint between conductor and pin. Furutech's two-stage Alpha Process gives every metal part a deep cryogenic freeze followed by a patented Ring Demagnetization treatment, and it is applied to the metal parts rather than to a finished cable.
NCF is the development they are best known for. Nano Crystal² Formula is a compound built into plug bodies, connectors and accessories. Furutech say the crystalline material at its heart does two things: it generates negative ions that dissipate static, and it converts thermal energy into far infrared. Combined with nano-scale ceramic particles and carbon powder, it adds piezoelectric damping on top of that. It appears across the connector range and in the NCF Booster supports.
The catalogue is wide, from DIY plugs at a few pounds through to reference mains cables and distributors, which makes Furutech useful both to people building their own cables and to people buying finished ones.
Browse by Range
NCF and Alpha are the two treatments that run through the range rather than separate product lines, so you will find both applied across plugs, cables and accessories.
-
£308.33Ex. VAT
The Furutech Monaco LP Stabilizer is a 210g record weight in non-magnetic stainless steel and carbon fibre, with a piezo ceramic damping base cut with eight concentric grooves to calm record vibration during playback.
-
£57.50Ex. VAT
The Furutech FT-UKS(R) is a 13A UK mains socket for power distribution units, with rhodium-plated 1.2mm α (Alpha) pure copper contacts, a patent-pending pressure plate and set screw terminals for up to 10AWG wire.
-
£41.67Ex. VAT
The Furutech NCF Booster Shaft Bar Adjuster is a pair of nickel-plated brass height adjusters with NCF nylon bases that fine-tune NCF Booster and NCF Booster-Signal shaft bars by up to 7.0mm.
-
£516.67Ex. VAT
The Furutech e-TP60E NCF is a six-outlet Schuko power distributor with rhodium-plated FI-E30 NCF sockets, an FI-06 NCF(R) IEC inlet and Formula GC-303 EMI absorption, upgrading the standard e-TP60e's gold-plated parts.
-
£2,541.67Ex. VAT
The Furutech Project V1-LAN is a 1.2m Category 8 Ethernet cable from the flagship Project V1 range, with silver-plated Alpha OCC conductors, five-layer shielding, NCF damping and gold-plated RJ45 plugs for quieter network streaming.
-
£221.67Ex. VAT
The Furutech GTX-D Gold is a 20A, 125V US NEMA duplex wall receptacle for US-wired systems, with 24k gold-plated pure copper contacts, a separate stainless steel spring and a ceramic and carbon damped body.
-
£221.67Ex. VAT
The Furutech GTX-D Rhodium is a 20A, 125V US NEMA duplex wall receptacle for US-wired systems, with rhodium-plated pure copper contacts, a separate stainless steel spring and a ceramic and carbon damped body.
-
£78.33Ex. VAT
The Furutech GS-11P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 20 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 150.
-
£78.33Ex. VAT
The Furutech GS-21P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 14 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 150.
-
£78.33Ex. VAT
The Furutech GS-28P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 12 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.
-
£78.33Ex. VAT
The Furutech GS-35P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 10 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.
-
£78.33Ex. VAT
The Furutech GS-46P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 8 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.