Hi-Fi Isolation
Shop by Brand
-
£708.33Ex. VATThe Ultra 5 V2 isolation feet approach the higher end of performance achieved by any Stillpoints products. Designed for use with components or floorstanding speakers, the Ultra 5 V2 contains four "technology pockets" in each unit and can be used without the Ultra Base on a perfectly level floor. The beveled base aids the adjustment of speakers once they have been fitted. Sold singly. -
£833.33Ex. VATThe Ultra 6 V2 are Stillpoints' flagship isolation feet for components (not designed for use with floorstanding speakers), containing multiple "technology pockets" to dissipate mechanical vibrations from your equipment and allow it to achieve its full potential. The Ultra 6 V2 is available with the Ultra Base if not being used directly on a Stillpoints ESS rack or component stand.
-
£1,250.00Ex. VATThe Ultra 7 V2 are the flagship isolation feet, representing the pinnacle of performance that can be achieved by any Stillpoints product designed to isolate floorstanding speakers. These isolation feet are available to the public after being developed with the manufacturers of high-end loudspeakers, and do not require the use of any Ultra Base or Ultra Bullets.
-
£833.33Ex. VATThe Rail Grid was designed by Stillpoints to offer an improvement upon the existing Acrylic Shelf and X Grid - offering greater isolation than the acrylic version and far greater flexibility than the X Grid - the two Stillpoints fitted on each rail can be adjusted along the entire length of the rail, and the Rail Grid can easily replace any existing ESS Rack shelves. Isolation feet NOT included. -
£24.96Ex. VATTo reduce the amount of RF interference entering your system we recommend "capping" all unused USB Ports. -
£24.96Ex. VATAQ Noise-Stopper Caps fit over unused RJ45 inputs or outputs, preventing RFI and EMI noise from entering the active circuit. Noise-Stopper Caps also protect against dust and corrosion.
-
£108.29Ex. VATFog Lifters significantly reduce RF coupling, whether with the floor, or due to misdirected efforts to isolate cable with stands or clamps that themselves have too much mass and are sources of RF Noise. A few inches or centimeters might not seem important, but as with light coming from a bulb, the energy falls off exponentially. A few inches or centimeters makes a big difference—which translates into a lower noise-floor and less compromise to, and distortion in, attached active circuits.
-
From£457.50Ex. VATThe DELOS butcher block from IsoAcoustics decouples the turntable from the supporting surface and dramatically diminishes structural vibrations and resonances, resulting in greater clarity and detail.
-
£24.96Ex. VATTo reduce the amount of RF interference entering your AV system we recommend "capping" all unused HDMI Ports. -
£39.12Ex. VATA Synthetic Visco-Elastic Polymer sheet that can be cut to size to damp anything. -
£33.29Ex. VATTo reduce the amount of RF interference entering your system we recommend "capping" all unused XLR inputs. -
£33.29Ex. VATTo reduce the amount of RF interference entering your system we recommend "capping" all unused XLR Outputs.
