Jumpers & Connectors
Banana plugs, BFA connectors, spades and jumper links from Furutech, WBT, Atlas and AudioQuest, for terminating bare cable or replacing tired existing terminations.
Choosing the right termination
The plug is the last few centimetres of the signal path and the part most likely to degrade over time. Oxidised contacts and loose fittings cost more performance than most people expect, and they are cheap to put right.
Banana plugs are the standard choice in the UK and fit most binding posts. BFA connectors are common on Naim equipment and some other British amplifiers. Spades give a larger contact area and suit binding posts that clamp tightly, though they need room behind the equipment. Check what your amplifier and speakers accept before ordering, since some binding posts are shrouded and will not take a spade.
Jumper links replace the metal link plates on bi-wireable speakers and are one of the cheapest improvements available if you are running a single-wire cable. If you would rather have terminations fitted than fit them yourself, we terminate cable to order free of charge.
-
Furutech
Furutech Jumper Series High End Performance Speaker Jumper CablesSKU: Furutech Jumper Series
(2 reviews)£229.17Ex. VATHigh-purity large α (Alpha)-OCC conductors for minimal impedance (3.4 Sq.mm) with beautifully engineered high performance rhodium-plated nonmagnetic connectors. FP-201(R) pure copper spades (Jumper-S); FP-200B (R) eutectic copper alloy banana connectors (Jumper-B) or spade to banana by request. -
£391.67Ex. VAT
Most jumper cables supplied by speaker manufacturers are adequate for the job, but Furutech has never subscribed to being merely adequate. Furutech Speakerflux Jumper Cables use high-purity large diameter 6mm-squared α (Alpha) conductor for minimal internal impedance.
-
£162.50Ex. VAT
The Furutech FT-866 NCF is a pair of rhodium-plated speaker binding posts with a patented one-piece wound-wire Alpha-OCC conductor, NCF damped body and push-on internal connection for low impedance and low noise.
-
£205.00Ex. VAT
The Furutech FT-816 is a pair of carbon-finished speaker binding posts with rhodium-plated Alpha pure copper conductors, a damped carbon fibre and stainless steel housing, and solder or set-screw connection.
-
£360.00Ex. VAT
The Furutech FT-818 is a pair of Torque Guard speaker binding posts with rhodium-plated Alpha pure copper conductors and a torque-limiting nut that clamps every cable at the same pressure without overtightening.
-
£100.00Ex. VAT
A pair of Furutech FP-803 speaker binding posts with rhodium-plated Alpha phosphor bronze conductors and matt black copper alloy housings, for solder or set-screw connection of cables up to 4.5mm.
-
£151.67Ex. VAT
A pair of Furutech FT-809 Torque Guard speaker binding posts, with a ratcheting nut that prevents over-tightening and rhodium-plated Alpha pure copper conductors, for solder or crimp connection of cables up to 4.5mm.