Furutech
Japanese maker of connectors, plugs and power products, founded in 1988 in Tokyo. Furutech supply components to other cable manufacturers as well as selling under their own name, and their plugs are found across the industry.
About Furutech
Quick Access
The company whose connectors are inside other brands' cables
Furutech occupy an unusual position. Founded in Tokyo in 1988, they sell finished cables and power products under their own name, but they are just as significant as a component supplier: a large number of cable brands terminate their products with Furutech plugs, sometimes saying so and sometimes not.
That gives the company a different set of priorities from a cable house. The focus is on the connector itself, on the metallurgy, the plating, the contact pressure and what happens at the joint between conductor and pin. Furutech's two-stage Alpha Process gives every metal part a deep cryogenic freeze followed by a patented Ring Demagnetization treatment, and it is applied to the metal parts rather than to a finished cable.
NCF is the development they are best known for. Nano Crystal² Formula is a compound built into plug bodies, connectors and accessories. Furutech say the crystalline material at its heart does two things: it generates negative ions that dissipate static, and it converts thermal energy into far infrared. Combined with nano-scale ceramic particles and carbon powder, it adds piezoelectric damping on top of that. It appears across the connector range and in the NCF Booster supports.
The catalogue is wide, from DIY plugs at a few pounds through to reference mains cables and distributors, which makes Furutech useful both to people building their own cables and to people buying finished ones.
Browse by Range
NCF and Alpha are the two treatments that run through the range rather than separate product lines, so you will find both applied across plugs, cables and accessories.
-
£78.33Ex. VAT
The Furutech GS-83P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 4 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 30.
-
£55.83Ex. VAT
The Furutech FT-903 Gold is a pair of chassis-mount RCA sockets with 24k gold-plated α (Alpha) pure copper contacts, a heat-resistant Liquid Crystal Polymer housing and a damped chassis nut, for soldered installation.
-
£114.17Ex. VAT
The Furutech FPX Gold is a 15A/20A, 125V US NEMA duplex wall receptacle for US-wired systems, with 24k gold-plated phosphor bronze contacts, pin insert construction and set-screw terminals.
-
£62.50Ex. VAT
The Furutech FT-909 Gold is a pair of PCB-mount RCA sockets with 24k gold-plated α (Alpha) pure copper contacts and a heat-resistant Liquid Crystal Polymer housing, made to solder directly to a circuit board.
-
£5.25Ex. VAT
The Furutech FS-303 is an entry-level, two-core parallel speaker cable with 15 AWG α (Alpha) treated μ-OFC conductors, made to order by Future Shop from 1m to 30m with Furutech plugs or bare wire.
-
£100.00Ex. VAT
A pair of Furutech FP-803 speaker binding posts with 24k gold-plated Alpha phosphor bronze conductors and matt black copper alloy housings, for solder or set-screw connection of cables up to 4.5mm.
-
£17.38Ex. VAT
The Furutech FS-502 is a shielded two-core speaker cable with 14 AWG α (Alpha) treated μ-OFC conductors, made to order by Future Shop from 1m to 30m with Furutech plugs or bare wire.
-
£117.50Ex. VAT
The Furutech FP-908(G) is a pair of gold-plated PCB-mount RCA sockets with an Alpha pure copper centre conductor, red and white nylon and fibreglass insulation and an Alpha copper alloy ring nut.
-
£25.72Ex. VAT
The Furutech μ-2T is a heavy-gauge two-core speaker cable with 13 AWG α (Alpha) treated μ-OFC conductors, made to order by Future Shop from 1m to 30m with Furutech plugs or bare wire.
-
£151.67Ex. VAT
A pair of Furutech FT-809 Torque Guard speaker binding posts, with a ratcheting nut that prevents over-tightening and 24k gold-plated Alpha pure copper conductors, for solder or crimp connection of cables up to 4.5mm.