AV Extenders
HDMI and AV extenders over Cat6, HDBaseT, fibre and wireless, carrying video with audio, USB, IR and RS232 where required.
Shop by Brand
Getting a signal across a building
An extender sends HDMI further than a cable can reliably carry it, by converting the signal for transmission over structured cable or fibre and converting it back at the far end. It is a transmitter and receiver pair, and both ends have to match.
Choose the transport by distance and by what the building already has. HDBaseT over Cat6a covers most residential distances and carries control signals alongside the video, which saves running separate cable for IR or RS232. Fibre goes further and is immune to electrical interference, which suits long runs and noisy environments. Wireless solves rooms where no cable can be run, at the cost of latency and reliability compared with a wired link.
Two things to confirm before ordering: the resolution and refresh rate the extender supports at the distance you actually need, since ratings usually drop at longer runs, and whether the receiver is powered locally or over the cable. Cat cable quality matters more here than in a data network, and solid core Cat6a correctly terminated is the baseline. Tell us the distance and what has to travel with the video.
-
£999.99Ex. VATThe SDV-CS8 by CYP is an efficient way of controlling multiple SDVoE extender within the same network, using the WebGUI to configure the transmitters, receivers or transceivers. -
£1,481.16Ex. VATThe XA-4 Advanced HDMI Pattern Generator and Analyser is an integrators tool for producing 4K HDMI signals for verifying and testing wider AV installations. Product Code - XA-4.
-
SALE
Gefen
Gefen EXT-HD2IRS-LAN-RX HDMI over IP with RS-232 and Bi-Directional IR - Receiver PackageSKU: EXT-HD2IRS-LAN-RX
£478.00Ex. VATThe HD over IP w/ RS-232 and 2-way IR extends HDMI, RS-232, and bi-directional IR over a Gigabit Local Area Network. Product Code - EXT-HD2IRS-LAN-RX -
SALEGefen
Gefen EXT-UHD600-1SC 4K Ultra HD 600 MHz Extender for HDMI over one Fiber-Optic CableSKU: EXT-UHD600-1SC
£4,238.10 £4,709.00Ex. VAT ✓ Save £470.90The Gefen EXT-UHD600-1SC is a compact and high-performance solution for extending uncompressed, full-bandwidth HDMI 2.0 audio/video with HDR, up to 200 meters (660 feet), over a single strand of SC-terminated 50/125 µm OM3 or better multi-mode fiber-optic cable. It supports 18.2 Gbps of bandwidth and 600 MHz TMDS Clock frequency, the highest specified under the HDMI 2.0 standard. -
SALE£1,224.00Ex. VATThe GefenToolbox HD Pattern Signal Generator is the most advanced testing device for your audio and video equipment: -
£2,275.00Ex. VATThe G44 HDMI Video Wall Controller supports 4K@60fps on four displays, with up to four HDMI inputs. Use it as a video wall processor, matrix switcher, or presentation switcher. Audio routing from digital or analog inputs adds versatility, ideal for signage, control rooms, or meetings. Control via IP, serial, front panel, or third-party systems with standalone operation after setup. -
£250.00Ex. VATThis HDMI/USB KVM Extender transmits HDMI and USB signals up to 164ft over a single Cat5e/6 cable with zero latency. It supports HDMI 1.4b, USB 2.0, and two-way POC, requiring power from only one end.
-
£500.00Ex. VATThe MS-HBTB66C70 HDBaseT™ Matrix Switcher Kit supports 4K HDMI, audio, IR, RS232, and PoC over 70m via a single CAT cable. With 18 audio inputs, 12 outputs, and full audio control, it suits both residential and commercial setups. Includes 4 HDBaseT receivers. -
£1,250.00Ex. VATThe MS-HDM88 Matrix Switcher routes 4K HDCP 2.2 signals from 8 HDMI sources to 8 displays. It supports ARC, downscaling, and analog/coaxial audio de-embedding. Multiple control methods ensure seamless operation. -
£500.00Ex. VATThe MS-MV51B is a 4K presentation switcher featuring 4 HDMI and 1 VGA (YPbPr, CVBS) input with HDMI output. It includes a built-in scaler for seamless resolution adjustment, delivering sharp, consistent video across all sources—ideal for pro AV environments.
