System Isolation
Vibration control for speakers, components, turntables and cables from IsoAcoustics, Stillpoints and Townshend. One of the least glamorous upgrades and one of the most reliable.
Shop by Brand
The science of vibration control
Every component in a hi-fi system is affected by vibration from two directions at once. Airborne energy from the speakers reaches the equipment through the air and through the floor, and mechanical energy generated inside the equipment itself has to go somewhere.
Two approaches exist and they do different jobs. Isolation decouples a component from what it sits on, so vibration cannot travel between them. Coupling does the opposite, draining energy out of the component into a heavier structure. Speakers generally benefit from isolation from the floor, which breaks the room excitation loop and tightens bass. Turntables benefit most of all, since a stylus in a groove is a vibration sensor by design.
This is the category where the effect is most obvious to people who expected nothing. Putting isolation feet under a pair of standmount speakers changes the bass and the imaging in a way that is easy to demonstrate. Load ratings matter: the product has to be matched to the weight it carries or it will not work as designed. Tell us the component weights and we will specify the right size.
-
£37.50Ex. VATThese optional extension bars work brilliantly with both the Furutech NCF Booster and NCF Booster Signal giving you more flexibility by greatly increasing the potential height of the NCF Booster segments. Whether your power sockets are 10cm off the ground or your hi-fi system is contained in a specialist rack, these extension bars will allow you to receive the full benefit of the NCF Boosters.
-
£185.00Inc. VAT
Not only does the Furutech NCF Booster-Signal Connector and Cable Holder lift audio cables off the floor minimizing their points of contact with the floor, reducing electromagnetic interference, it also excels at providing NCF damping support for connectors and cables at points of connection. The NCF Booster-Signal allows for the optimum alignment between connectors and sockets and eliminates static – boosting performance by allowing a more pure and clear signal.
-
£708.33Ex. VAT
The QPOINT Resonance Synchronizer emits a subtle field which manipulates all electromechanical resonances within its immediate proximity so that they resonate in unison with each other. By syncing these resonances, the QPOINT eliminates internal electrical noise, enhancing the coherency and timing that is typically lacking in even the most high-end audio systems.
-
From£682.50Ex. VAT
The GAIA isolators are machined stainless steel units that incorporate IsoAcoustics’ patented design to provide a high degree of speaker isolation, while resisting lateral movement and oscillations, to maintain accuracy and alignment with the listening position. Internal reflections from the hard supporting surface are attenuated resulting in greater sound clarity and openness.
-
£983.33Ex. VAT
This series of isolation feet by Tungsten Grooves was created to efficiently absorb vibrations from your audio equipment, relying on the absorptive properties of tungsten to unlock hidden details in your music system. The W70-H33 is the middle child of the series, offering greater performance than the Mini Grooves but with a smaller profile than the W70-H47. They have a smaller top plate than their larger sibling, but the same diameter, making them an ideal choice if space is at a premium.
-
£1,249.17 £1,316.67Ex. VAT ✓ Save £67.50
This series of isolation feet by Tungsten Grooves was created to efficiently absorb vibrations from your audio equipment, relying on the absorptive properties of tungsten to unlock hidden details in your music system. The W70-H47, affectionately known as the Fat Boy, is the largest foot in the series offering the greatest performance.
-
Tungsten Grooves
Tungsten Grooves W50-H33 Mini Groovers Isolation Feet - Individual FootSKU: Tungsten Grooves W50-H33
£566.67Ex. VATThis series of isolation feet by Tungsten Grooves was created to efficiently absorb vibrations from your audio equipment, relying on the absorptive properties of tungsten to unlock hidden details in your music system. The W50-H33 Mini Groovers are the smallest feet that Tungsten Grooves make, with the same height as the D70 but a narrower profile than either of its two bigger siblings, making it ideal for the smallest of components. -
£375.00Ex. VATThe SSF Stainless Steel feet by Shunyata Research are designed to isolate their power distributors without needing to place them on a dedicated HiFi rack or platform. They come in two sizes- SSF-38, which are recommended for the Venom Line power distributors, and the SSF-50 which are recommended for the Performance Line (Hydra Delta D6 and above).
-
From£1,000.00Inc. VAT
The Aperture II acoustic treatment panels by Stillpoints are able to offer both absorption and diffusion of sound, helping your system achieve greater dynamism and depth without blurring any detail. Available with Cherry, Oak and Walnut frames - the images appear in the same order as the options in the dropdown menu. As with any product made from real wood, your item may be a slightly different colour to the one pictured.
-
£20.83Ex. VATThe Ultra SS Bullet Spike is designed for use with the Ultra SS V2 for those with deep thick carpet. Do keep in mind that’s it’s difficult to tune the alignment of a loudspeaker within a 1/16” once the spikes have been fitted! Sold singly.
-
Stillpoints
Stillpoints Ultra Base for Ultra SS V2, Ultra II V2, Ultra 5 V2SKU: Stillpoints Ultra Base
£83.33Ex. VATThe Ultra Base can be connected to the Ultra SS V2, Ultra II V2, Ultra 5 V2, and directly to any component in a system. One 1/4-20 x 5/8″ set screw is included with each Ultra Base. The 1/4-20 adapter listed below allows connection of the Ultra Base to the beveled lower section of the Ultra 5. The added height will provide more ventilation space under an amplifier if needed. The Ultra Base can also spread the mass of whatever is being supported over a larger area adding stability in some applications. Adding the Ultra Base to any Stillpoint can increase the performance of that Stillpoint significantly. Sold singly. -
£20.83Ex. VATThe Ultra 5 Bullet Spike is designed for use with the Ultra 5 V2 for those with deep thick carpet. Do keep in mind that’s it’s difficult to tune the alignment of a loudspeaker within a 1/16” once the spikes have been fitted! Sold singly.