System Isolation
Vibration control for speakers, components, turntables and cables from IsoAcoustics, Stillpoints and Townshend. One of the least glamorous upgrades and one of the most reliable.
Shop by Brand
The science of vibration control
Every component in a hi-fi system is affected by vibration from two directions at once. Airborne energy from the speakers reaches the equipment through the air and through the floor, and mechanical energy generated inside the equipment itself has to go somewhere.
Two approaches exist and they do different jobs. Isolation decouples a component from what it sits on, so vibration cannot travel between them. Coupling does the opposite, draining energy out of the component into a heavier structure. Speakers generally benefit from isolation from the floor, which breaks the room excitation loop and tightens bass. Turntables benefit most of all, since a stylus in a groove is a vibration sensor by design.
This is the category where the effect is most obvious to people who expected nothing. Putting isolation feet under a pair of standmount speakers changes the bass and the imaging in a way that is easy to demonstrate. Load ratings matter: the product has to be matched to the weight it carries or it will not work as designed. Tell us the component weights and we will specify the right size.
-
£1,579.17Ex. VATThe Synergistic Research FEQ Carbon is a third-generation, two-channel acoustic field generator. New to the FEQ Carbon is a wholly redesigned PCB with dual RF generators. The first function of the redesign was to provide the ability to create different wave shapes, and the second was the addition of a 2nd, independently controlled ULF generator channel.
-
£1,725.00Ex. VAT
HIFISTAY's Trinia +α shows a higher level of performance by adding +α to the existing Trinia model and improving the lower vibration layer and internal material change. The Hardpoint has been designed from the ground up to function as a state-of-the-art anti-vibration device. The term 'hard point' is derived from automotive engineering, meaning the best design for optimizing the movement of the suspension.
-
£516.67Ex. VAT
HIFISTAY's Soft Jelly uses the same circular pendulum motion as the TetraBase 80 Swing, but expanded to a quadruple layer instead of a triple layer for a vibration-sensitive source device. Thanks to this, 'Soft Jelly', as the product name suggests, helps to maximize the device's original performance through flexible movements like jelly.
-
From£791.67Ex. VAT
HIFISTAY's Gyrotension Swing has been designed to offer a fine-tuned isolation solution specifically for sensitive Turntables. The Gyrotension utilises a structure of 24, 48 or 72 silicone bands that act like a suspension system for your turntable, effectively reducing vibrations both external and internal.
-
HiFiSTAY
HIFISTAY Ballerino Single Swing Speaker Isolation Foot (Set of 4)SKU: Ballerino Single Swing
From£341.67Ex. VATHIFISTAY's Ballerino Speaker Isolation features three versions of isolation, the first being 'Single Swing' which consists of one horizontal layer of HIFISTAY's proprietary spherical pendulum swing technology. The Ballerino Single Swing is suitable for smaller and less weighted bookshelf speakers. The 45 Single Swing supports speakers up to 20kg per foot, altough it is recommended for 7.5kg per foot. The 60 Single Swing supports up to 40kg per foot, altough it is recommended for 15kg per foot. Due to the mechanical nature of the Ballerino series isolation, the recommended weight per foot is less than half of the maximum supported weight to effictively function as intended without putting excess strain on each individual component that makes up the Ballerino.
-
HiFiSTAY
HIFISTAY Ballerino Double Swing Speaker Isolation Foot (Set of 8)SKU: Ballerino Double Swing
From£1,691.67Ex. VATHIFISTAY's Ballerino Speaker Isolation features three versions of isolation, the second being 'Double Swing' which consists of two horizontal layers of HIFISTAY's proprietary spherical pendulum swing technology. The Ballerino Double Swing is suitable for lighter and smaller floorstanding loudspeakers. The 80 Double Swing supports speakers up to 80kg per foot, altough it is recommended for 30kg per foot. Due to the mechanical nature of the Ballerino series isolation, the recommended weight per foot is less than half of the maximum supported weight to effictively function as intended without putting excess strain on each individual component that makes up the Ballerino.
-
HiFiSTAY
HIFISTAY Ballerino Triple Swing Speaker Isolation Foot (Set of 8)SKU: Ballerino Triple Swing
From£2,450.00Ex. VATHIFISTAY's Ballerino Speaker Isolation features three versions of isolation, the third being 'Triple Swing' which consists of three horizontal layers of HIFISTAY's proprietary spherical pendulum swing technology. The Ballerino Triple Swing is suitable for most floorstanding speakers, including heavyweight speakers over 150kg. The 80 Triple Swing supports speakers up to 100kg per foot, altough it is recommended for 40kg per foot. The 88 Triple Swing supports up to 120kg per foot, altough it is recommended for 50kg per foot. The 130 Triple Swing supports speakers up to 160kg per foot, altough it is recommended for 60kg to 80kg per foot. Due to the mechanical nature of the Ballerino series isolation, the recommended weight per foot is less than half of the maximum supported weight to effictively function as intended without putting excess strain on each individual component that makes up the Ballerino.
-
From£500.00Ex. VAT
HIFISTAY's V4 spikes are fundamentally different from your traditional steel spikes, especially those supplied with your speakers. There are 4 different variations of spikes available from HIFISTAY, starting with the simplest design, the Flip Spike, their height-adjustable Lutz Spike, the dual-motion swing Double Axel spike and all the way up to their flagship triple-motion swing, the Triple Axel spike. All of the spikes are made from duralumin and stainless steel, with a ceramic ball bearing as the contact point. The recommended load bearing per spike is 40kg for Flip & Lutz, 70kg for Double Axel and 120kg for Triple Axel.
-
From£283.33Ex. VAT
HIFISTAY's Sound Wings are developed to reduce external vibrations from affecting the signals passing through your cables by rasing them up off the floor and applying their swing technology to dissipate any incoming vibrations. The Sound Wings feature 2/3 levels of vibration control, starting with a 2-layer ceramic ball swing system in the base, a single or double silicon band connecting the two isolated poles, and lastly an optional aluminium pedestal to help fix your cables in place with a sturdier platform.
-
From£687.50Ex. VAT
HIFISTAY's Stella range is a collection of technology and know-how culminated in to an exceptional isolation solution for the money and size! By combining a three-layer composite pyramid structure with ceramic balls made of zirconia, the Stella Double Swing offers an excellent vibration control solution for improved sound quality. Due to the Stella being made from high-density stainless steel, as opposed to Duralumin, the sound stage appears more stable with greater purity and density in the mid range.
-
£258.33Ex. VAT
The Nordost QNET Stand is a must-have for anyone looking to take the performance of their QNET Network Switch to the next level. With its impeccable design, it is sure to provide listeners with a noiseless digital experience, allowing them to enjoy the music even more.
-
£182.50Ex. VATThe Aperta Sub XL decouples the subwoofers from the supporting surface to prevent the physical transfer of energy that excites the supporting surface, causes room rattle and disturbs your neighbours.