DC Power Supplies
Linear and low noise DC power supplies in 5V, 9V, 12V and 15V for streamers, DACs, routers and network switches that ship with a switch mode adaptor.
Shop by Brand
Replacing a switch mode power supply
Most small audio components arrive with a switching wall adaptor chosen for cost and size rather than noise performance. Replacing it with a linear or low noise supply is one of the more reliably audible upgrades available to a streaming system, particularly where the component's own internal regulation is modest.
Three specifications have to match. Voltage must be exactly what the equipment expects. Current capacity must equal or exceed the original supply, and more is not a problem. Polarity is usually centre positive but not always, and getting it wrong can damage the equipment, so check the label on the original adaptor before ordering.
The router and network switch feeding a streamer are also running on switching supplies, and upgrading those is sometimes more effective than upgrading the streamer's own. Send us the model and a photo of the original adaptor label and we will confirm the correct specification before you buy.
-
Gefen
Gefen EXT-PS54AULPN EXT-PS54AULPN 5VDC 4 AMPS Universal Power Supply Locking Type - 2.5mm pinSKU: EXT-PS54AULPN
£27.00Ex. VATGefen 5VDC 4 AMPS Universal Power Supply Locking Type - 2.5mm pin Product Code: EXT-PS54AULPN -
Gefen
Gefen 5VDC Power Supply (2 AMP) interchangeable connectors with 1.3mm connectorSKU: EXT-PS52AIP-1.3-6-AL
£40.00Ex. VAT5VDC Power Supply - 2 AMP - interchangeable connectors (US,UK,EU) w/ 1.3mm connector. Product Code: EXT-PS52AIP-1.3-6-AL -
Gefen
Gefen 5VDC Power Supply (2.6 AMP) interchangeable connectors with long plugSKU: EXT-PS526AIPN
£25.00Ex. VAT5VDC Power Supply - 2.6 AMP - interchangeable connectors (US,UK,EU,AU), w/ long-plug Product Code: EXT-PS526AIPN -
£21.00Ex. VATAvailable as a replacement for use with Gefen extenders, distribution and amplifiers that require 12V/3.5A of DC power.
-
SALE£54.90 £61.00Ex. VAT ✓ Save £6.105VDC 4 AMPS Universal Power Supply Locking Type - 2.5mm pin -
£609.99Ex. VATThe AU-1H1DD-4K22 is an advanced solution for de-embedding and down-mixing audio signals from the HDMI input (up to Dolby® Digital and DTS® 2.0+Digital Out). Product Code - AU-1H1DD-4K22. -
£1,458.33Ex. VATThe Elite BDC (Balanced Direct Current) Power Supply by PLiXiR benefits from two stages of regulation- an open-loop first-stage and a closed-loop feedback second stage. This means that the Elite BDC can scrub noise out of your power source, helping your hifi setup sing. This product comes as a stack, with both rated at 12V/2A. This product has been designed with the Melco D100, E100 & S100 in mind, but is perfect for any source components.
-
£152.49Ex. VATThe PUV-POH is a power injector designed to send remote power to HDBaseT products. When placed inline between two HDBaseT products, it provides PoE/PoH power in either direction. -
£374.17Ex. VATThe LPS-212 by NuPrime is an excellent 12V power supply for low power devices like DACS and streamers, featuring two DC outputs (one rated 12V/2A and one 12V/1A). The LPS-212 benefits from a fanless design which aids its low-noise performance, and comes with a DC to micro-USB adaptor to boost its compatibility with your audio equipment.
-
£82.50Ex. VATThe Ferrum Power Link DC Power Cable is designed to connect the Hypsos power supply to the OOR headphone amp, and features two separate wires delivering power and two wires providing the feedback in order to ensure stable voltage at all times. -
£82.50Ex. VATThe Ferrum DC JACK Power Cables is a high-quality DC cable that can come as 5.5x2.1mm or 5.5x2.5mm options, offering compatibility with the most commonly used DC inlets. -
From£745.83Ex. VATThe Elite BDC (Balanced Direct Current) Power Supply by PLiXiR benefits from two stages of regulation- an open-loop first-stage and a closed-loop feedback second stage. This means that the Elite BDC can scrub noise out of your power source, helping your hifi setup sing.
