Blocks & Conditioners

Distribution blocks, filtered conditioners and combined units in four to ten socket configurations, from Atlas, Chord, ISOL-8, IsoTek, PLiXiR, PS Audio, Shunyata and Synergistic Research.

134 products Award Winning Dealer Since 2013 Free expert consultation

Block or conditioner? The difference explained

A power block is a distribution point. It takes one feed from the wall and provides several sockets, using better internal wiring and connectors than a domestic extension lead, and it puts every component on a common earth reference. It does not filter.

A conditioner adds filtering, and sometimes surge protection, isolation transformers or full regeneration. The filtering removes high frequency mains noise, which typically lowers the noise floor and can improve stereo imaging. The trade off is that filtering in series with a power amplifier can restrict current on dynamic peaks and leave the system sounding flat.

The common arrangement solves both problems: filtered outlets for sources and digital equipment, and an unfiltered or high current outlet for the power amplifier. Many units are built exactly that way. Count the components you need to plug in, note which of them are amplifiers, and check the socket type your mains cables use. Tell us what the system is and we will recommend the configuration rather than the most expensive box.

4.95/5 from 20,731+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

72 of 131 products

Now Shopping by New Clear all
  • IsoTek

    IsoTek EVO3 Nova Power Conditioner W/ Premier Power Cable

    SKU: EVO3 Nova

    From
    £7,495.83
    Ex. VAT

    The EVO3 Nova is a state of the art passive power cleaning system incorporating full DC cancellation. The system offers 12 independently filtered power outlets, eight rated at 10A and four rated at 16A, these designed for high current electronics, for example power amplifiers, active loudspeakers or subwoofers. These also feature a slightly paired down version of the Titan’s unique Direct-Coupled© circuit. Nova is a fully system solution, full system upgrade incorporating 12 independent filter networks, each supporting its own output socket.

    View Available Worldwide Shipping Available
  • IsoTek

    IsoTek EVO3 Super Titan Power Conditioner

    SKU: EVO3 Super Titan

    From
    £15,995.00
    Inc. VAT

    Super Titan is the ultimate statement in high-current power conditioning technology, delivering extremely low-impedance, high-current power conditioning for high-end power amplifiers, with a transient ability of 35,500W. Super Titan is the world’s most powerful audiophile mains conditioner.

    View Available Free delivery
  • IsoTek

    IsoTek EVO3 Genesis Power Generator

    SKU: 11001640

    £24,995.00
    Inc. VAT

    A revolutionary benchmark in clean-power technology for high-performance audio and AV systems, Genesis creates an entirely new, extremely low-distortion mains sine wave using multiple generators – a unique component, and uniquely effective.

    View Available Free delivery
  • Furutech

    Furutech Pure Power 6 NCF Top-of-the-Line Power Distributor

    SKU: Pure Power 6 NCF

    £10,045.00
    Inc. VAT

    Furutech upgrade their Pure Power 6 AC Mains Distributor, the ultimate expression of Furutech’s Pure Transmission Technology. Furutech engineers each and every step of power and signal transfer--no matter how small--using the finest materials and technologies available, like their proprietary Formula GC-303 EMI-absorbent material and Two-Stage Cryogenic and Demagnetizing Super α (Alpha) Treatment applied to all metal parts.

    View Available Free delivery
  • PS Audio

    PS Audio DirectStream Power Plant 12 Mains Regenerator

    SKU: DirectStream P12

    £5,495.00
    Inc. VAT

    The DirectStream P12 is PS Audio's most compact high-end personal power generating station in the world. It is the successor of the venerable P5 Power Plant relied upon by thousands. The P12 is all-new, based on the P5, but rebuilt from the ground up. It features an ultra-low impedance analogue power amplifier, pure DSD FPGA based sine wave generator, and the lowest distortion available in a Power Plant. The P12 is capable of powering most small to medium-sized systems and bringing forth all that’s possible from your system ensuring you get the same great performance every time you listen.

    View Available Free delivery
  • PS Audio

    PS Audio DirectStream Power Plant 20 Mains Regenerator

    SKU: DirectStream P20

    £10,500.00
    Inc. VAT

    The DirectStream Power Plant 20 is PS Audio's most powerful AC regenerator ever with 2000 watts of pure regenerated power, and the first to accept both 20 amp and 15 amp power cables. The massive P20 is their finest expression of the art of pure power delivery, providing more than enough power for an entire system. Regardless of incoming power quality the P20 outputs clean, protected, low impedance, regulated power you can count on for the most demanding systems in the world.

    View Available Free delivery
  • Quantum Resonance

    Quantum Resonance QSource Linear Power Supply

    SKU: QSource

    £2,850.00
    Inc. VAT

    The QSource is a fanless Linear Power Supply designed specifically for hi-fi audio applications. By providing a stable, clean output of DC power at select voltages, while maintaining extremely low noise levels, the QSource enhances the audio imagery of a sound system by improving sonic articulation, heightening dynamics, and expanding the sound stage.

    View Available Free delivery
  • Quantum Resonance

    Quantum Resonance QSource Premium DC Cable

    SKU: QSource DC Premium

    £360.00
    Inc. VAT
    Nordost’s Premium DC cable uses 2 x 18 AWG, silver-plated, solid-core OFC conductors, which have been arranged in a twisted pair construction. This geometry helps to eliminate noise within the cable. However, to further safeguard from RFI and EMI, the conductors are protected by a braided shield.
    View Available Free delivery
  • Quantum Resonance

    Quantum Resonance QSource DC Cable

    SKU: QSource DC

    £310.00
    Inc. VAT

    Nordost’s DC cable uses 2 x 22 AWG, silver-plated, solid-core OFC conductors, which have been arranged in a twisted pair construction. This geometry helps to eliminate noise within the cable. However, to further safeguard from RFI and EMI, the conductors are protected by a braided shield. Additionally, the QSOURCE DC Cable uses Nordost’s Micro Mono-Filament technology in order to increase signal speeds by introducing an air-dielectric to the cable design.

    View Available Free delivery
  • IsoTek

    IsoTek SMART Alpha 8-Way Networkable Power Line Cleaner

    SKU: IsoTek Alpha

    From
    £2,495.00
    Inc. VAT
    The IsoTek SMART Alpha is a 1U rack-width, 8-way power line cleaner for custom installation, with independently cleaned IEC outlets, 40,000A surge protection and outlet control over RS232, LAN and a web interface, plus Control4 and Crestron integration.
    View Available Free delivery
  • IsoTek

    IsoTek SMART Delta 16-Way Networkable Power Line Cleaner

    SKU: IsoTek Delta

    From
    £3,995.00
    Inc. VAT
    The IsoTek SMART Delta is a 2U rack-width, 16-way power line cleaner for custom installation, with independently filtered outlets, 54,000A surge protection and full control over RS232, LAN and a secure web interface, plus Control4 and Crestron modules for remote reboot and sequential start-up.
    View Available Free delivery
  • Plixir

    PLiXiR Elite BAC 400 Balanced Power Conditioner

    SKU: PLiXir Elite BAC 400

    £1,795.00
    Inc. VAT
    Using a custom-built transformer from Noratel, the Elite BAC 400 by PLiXiR cleans up your AC mains supply for electrically sensitive equipment to help your setup achieve greater clarity of sound. It is the next step up in power from the BAC 150, delivering up to 400W.
    View Available Free delivery

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

IsoTek power conditioners remove noise and interference from your mains supply while providing surge protection for your system. This ensures your hi-fi or AV equipment receives clean, stable power, improving dynamics, detail, and overall performance.

IsoTek uses advanced passive components and proprietary design techniques to filter out mains interference and isolate components from electrical “cross‑talk.” This results in a cleaner, more stable supply, reducing noise, tightening dynamics, and delivering greater clarity and musical detail.

PLiXiR uses balanced power technology to reduce common-mode noise and ground loop issues at the source. This results in a more natural sound, a quieter background, and improved dynamics compared to standard conditioners.

Yes. Larger models such as the Elite BAC 1500 and above are built to handle integrated and power amplifiers, ensuring stable current delivery without limiting dynamics or musical expression.

Unlike many conditioners that restrict current, Shunyata’s distributors deliver clean power without limiting dynamics. Technologies developed for the Venom, Hydra, Denali, and Everest ranges ensure lower noise floors, blacker backgrounds, and more natural sound, benefits that audiophiles and professionals alike can hear instantly.

Unlike traditional power conditioners that only filter noise, PS Audio mains regenerators rebuild the AC waveform entirely. This gives your system a supply of clean, consistent power, free from voltage dips or distortion, resulting in improved dynamics and detail.

The Stellar Power Plant 3 is ideal for smaller systems or dedicated front-end components such as DACs, preamps, and streamers. It provides the same clean regenerated power found in larger models but in a more compact and affordable form.

A power block is the simplest solution. It distributes mains power safely to multiple components, often with improved internal wiring and better mechanical stability than standard extension leads.

A power conditioner goes further by filtering electrical noise and interference present on the mains supply. This can lower the noise floor and help systems sound cleaner and more controlled, especially in electrically noisy homes.

A power regenerator actively rebuilds the incoming mains supply into a new, stable waveform before feeding your system. Regenerators are typically used in higher-resolution systems where maximum consistency, stability, and noise reduction are required.

This depends on the components being powered and the levels of noise within your local mains connections. There is equipment available to measure the noise in your mains, however, one of the easiest ways is to try a power conditioner for your source components and hear if there is any difference during your listening. If there is minimal to no difference, then a good quality power block may be your best option.

Loading...
Loading...
loader
Loading...