Jumpers & Connectors
Banana plugs, BFA connectors, spades and jumper links from Furutech, WBT, Atlas and AudioQuest, for terminating bare cable or replacing tired existing terminations.
Shop by Brand
Choosing the right termination
The plug is the last few centimetres of the signal path and the part most likely to degrade over time. Oxidised contacts and loose fittings cost more performance than most people expect, and they are cheap to put right.
Banana plugs are the standard choice in the UK and fit most binding posts. BFA connectors are common on Naim equipment and some other British amplifiers. Spades give a larger contact area and suit binding posts that clamp tightly, though they need room behind the equipment. Check what your amplifier and speakers accept before ordering, since some binding posts are shrouded and will not take a spade.
Jumper links replace the metal link plates on bi-wireable speakers and are one of the cheapest improvements available if you are running a single-wire cable. If you would rather have terminations fitted than fit them yourself, we terminate cable to order free of charge.
-
NEW£64.17Ex. VATThe Furutech FP-209-10 (G) is a 24K gold-plated spade terminal with Alpha pure copper conductors, made for connecting mains cable to Furutech wall receptacles and AC and IEC power connectors. It accepts wire up to 4mm in diameter, or 8AWG, and can be either soldered or crimped. Supplied 20 pieces per set.
-
NEW£78.33Ex. VAT
The Furutech GS-11P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 20 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 150.
-
NEW£78.33Ex. VAT
The Furutech GS-21P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 14 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 150.
-
NEW£78.33Ex. VATThe Furutech GS-28P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 12 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.
-
NEW£78.33Ex. VATThe Furutech GS-35P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 10 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.
-
NEW£78.33Ex. VATThe Furutech GS-46P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 8 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 100.
-
NEW£162.50Ex. VATThe Furutech FT-866 NCF is a pair of rhodium-plated speaker binding posts with a patented one-piece wound-wire Alpha-OCC conductor, NCF damped body and push-on internal connection for low impedance and low noise.
-
NEW£30.83Ex. VATThe Furutech FT-210(G) is an insulated push-on disconnect terminal for 6.35mm tabs, with a 24k gold-plated α (Alpha) pure copper contact and a yellow PolySulfone sleeve, for 12 to 10 AWG wire. Pack of 10.
-
NEW£78.33Ex. VATThe Furutech GS-83P is a 24K gold-plated, Alpha-treated pure copper crimp sleeve for 4 AWG wire, holding stranded conductors together as one solid end for termination. Supplied in a pack of 30.
-
NEW£205.00Ex. VATThe Furutech FT-816 is a pair of carbon-finished speaker binding posts with rhodium-plated Alpha pure copper conductors, a damped carbon fibre and stainless steel housing, and solder or set-screw connection.
-
NEW£360.00Ex. VATThe Furutech FT-818 is a pair of Torque Guard speaker binding posts with rhodium-plated Alpha pure copper conductors and a torque-limiting nut that clamps every cable at the same pressure without overtightening.
-
NEW£100.00Ex. VATA pair of Furutech FP-803 speaker binding posts with 24k gold-plated Alpha phosphor bronze conductors and matt black copper alloy housings, for solder or set-screw connection of cables up to 4.5mm.
