Jumpers & Connectors
Banana plugs, BFA connectors, spades and jumper links from Furutech, WBT, Atlas and AudioQuest, for terminating bare cable or replacing tired existing terminations.
Shop by Brand
Choosing the right termination
The plug is the last few centimetres of the signal path and the part most likely to degrade over time. Oxidised contacts and loose fittings cost more performance than most people expect, and they are cheap to put right.
Banana plugs are the standard choice in the UK and fit most binding posts. BFA connectors are common on Naim equipment and some other British amplifiers. Spades give a larger contact area and suit binding posts that clamp tightly, though they need room behind the equipment. Check what your amplifier and speakers accept before ordering, since some binding posts are shrouded and will not take a spade.
Jumper links replace the metal link plates on bi-wireable speakers and are one of the cheapest improvements available if you are running a single-wire cable. If you would rather have terminations fitted than fit them yourself, we terminate cable to order free of charge.
-
£53.33Ex. VATSuperb piano lacquer appearance, these new pole terminals have been an instant hit...making nextgen™ more affordable! -
£108.33Ex. VATSuperb piano lacquer appearance, these new pole terminals have been an instant hit...making nextgen™ more affordable!
-
£106.00Ex. VATSuperb piano lacquer appearance, these new pole terminals have been an instant hit...making nextgen™ more affordable!
-
£51.25Ex. VATSuperb piano lacquer appearance, these new pole terminals have been an instant hit...making nextgen™ more affordable! -
£85.00Ex. VATThe WBT-0710 Cu mC features the same construction as WBT-0710 Cu, however with matt chromium finish outside. -
£208.33Ex. VATSuperb mechanical properties, solid construction and the two-piece clamping nut with a rotating pressure piece ensure an extraordinary high contact pressure and hence low and constant transition resistance level – the precondition to minimize negative effects on the sound quality. -
£208.33Ex. VATSuperb mechanical properties, solid construction and the two-piece clamping nut with a rotating pressure piece ensure an extraordinary high contact pressure and hence low and constant transition resistance level – the precondition to minimize negative effects on the sound quality. -
£151.67Ex. VATSuperb mechanical properties, solid construction and the two-piece clamping nut with a rotating pressure piece ensure an extraordinary high contact pressure and hence low and constant transition resistance level – the precondition to minimize negative effects on the sound quality. -
£70.00Ex. VATThese pole terminals are made from brass and well protected against oxidation thanks to their 24K gold plated finish. Both models accept 4-mm banana plugs, sandwich spades (up to 8 mm contact fork) as well as crimped cable ends (up to 6 mm2/9 AWG). -
£81.67Ex. VATThese pole terminals are made from brass and well protected against oxidation thanks to their 24K gold plated finish. Both models accept 4-mm banana plugs, sandwich spades (up to 8 mm contact fork) as well as crimped cable ends (up to 6 mm2/9 AWG). -
★ Award£24.99Ex. VATWith the design of The CLEARWATER, it was Van Den Hul's intention to produce the best match between quality and price. -
Custom£30.00Ex. VATThe Equator 2.0 by Atlas features two OFC conductors and PEF dielectric, and is custom-terminated by Future Shop engineers with gold-plated plugs. This cable produces a remarkably neutral performance for its price-range, with defined bass and smooth high-ends. Jumper cables are a useful alternative to bi-wire cables that also ensure optimal signal transfer between your speaker's high and low binding posts. For best results, match these with the Atlas Equator 2.0 Speaker Cable.
