Jumpers & Connectors
Banana plugs, BFA connectors, spades and jumper links from Furutech, WBT, Atlas and AudioQuest, for terminating bare cable or replacing tired existing terminations.
Shop by Brand
Choosing the right termination
The plug is the last few centimetres of the signal path and the part most likely to degrade over time. Oxidised contacts and loose fittings cost more performance than most people expect, and they are cheap to put right.
Banana plugs are the standard choice in the UK and fit most binding posts. BFA connectors are common on Naim equipment and some other British amplifiers. Spades give a larger contact area and suit binding posts that clamp tightly, though they need room behind the equipment. Check what your amplifier and speakers accept before ordering, since some binding posts are shrouded and will not take a spade.
Jumper links replace the metal link plates on bi-wireable speakers and are one of the cheapest improvements available if you are running a single-wire cable. If you would rather have terminations fitted than fit them yourself, we terminate cable to order free of charge.
-
AudioQuest
AudioQuest SureGrip 300 Spade Silver Plated Plugs - Pack of 4SKU: SPADE3004S
(4 reviews)£49.96Ex. VATThese AudioQuest plugs can be used to terminate your speaker cable with ease and do not require the use of any special tools. -
£49.96Ex. VATThese AudioQuest plugs can be used to terminate your speaker cable with ease and do not require the use of any special tools.
-
£25.00Ex. VATSilver-Plated Oxygen Free Copper, Teflon™ insulation.
-
From£2,600.00Ex. VATValhalla 2 Bi-Wire Jumpers are the optimal solution for achieving exceptional sound by replacing the standard metal plates and generic wires supplied with most bi-wire loudspeakers. V2 Bi-Wire Jumpers are even a huge improvement from Nordost’s Norse 2 and Reference Jumpers. -
£29.17Ex. VATHeavy Gauge Silver-Plated Oxygen Free Copper, Teflon™ insulation. -
From£45.83Ex. VATAtlas' Transpose Modular Termination System allows easy switching between spade, Z-plug and expanding 4mm connectors as your requirements change. With Atlas' Transpose Modular Termination System, their cable is factory-terminated with cold-weld connectors which accept a range of threaded inserts (the actual connector part of the plug). This gives the user the option to change from, for example, expanding 4mm plugs to spades simply by purchasing this set of Transpose adapters.
-
£29.17Ex. VATA set of four AudioQuest Crimp BFA/Banana speaker plugs, Direct-Gold Plated, for cable conductors up to 6.63mm² (9AWG), crimped rather than soldered and supplied with red and black boots.
-
£391.67Ex. VATMost jumper cables supplied by speaker manufacturers are adequate for the job, but Furutech has never subscribed to being merely adequate. Furutech Speakerflux Jumper Cables use high-purity large diameter 6mm-squared α (Alpha) conductor for minimal internal impedance.
-
Furutech
Furutech FP-209-10 Rhodium plated Spade Terminals - Pack of 10SKU: FP-209-10 Rh
(5 reviews)£30.83Ex. VATThe FP-209 spade terminals are available in both Gold and Rhodium plating as a solution for difficult to connect wall sockets or power / IEC connections. The FP-209 is the smallest spade connection that Furutech offer and this small connection allows you to easily connect conductors in tight connection areas.
-
★ Award£29.17Ex. VATWinner of What Hi-Fi's Best Speaker Cable 2018, AudioQuest's Rocket 11 is an excellent speaker cable for the money. Rocket 11's complimentary jumper cables offer a solid replacement to the standard metal plates/jumpers that come bundled with your speakers. By utilising jumpers of the same quality/construction as your speaker cable, you can improve the overall performance, dynamic range and sound staging of your hi-fi system.
-
£37.50Ex. VATEpicX is based on Chord's multi-award-winning Chord OdysseyX speaker cable. Both cables use 12 AWG oxygen free copper negative and positive conductors, silver-plated and insulated with XLPE before an outer PVC jacket is applied. -
★ Award£27.08Ex. VATThe Chord Clearway Jumper Cables are 20cm long with the option of spade to spade or spade to banana plugs. They are designed to link the bass frequency posts with the high-frequency posts of bi-wirable speaker.
