Speaker Cables

The connection between your amplifier and speakers, and one of the most audible upgrades in a system. Every cable here can be cut to your exact length and terminated to order free of charge, with optional free burn-in before it ships.

422 products Award Winning Dealer Since 2013 Free expert consultation

Choosing speaker cable for your system

Speaker cable carries the full amplified signal, so conductor quality, geometry and termination all affect what reaches the drivers. The differences are usually easiest to hear in bass control and stereo imaging, and they become clearer as the rest of the system improves.

Three decisions cover most purchases. Length should be equal for both runs even if the speakers sit at different distances from the amplifier. Configuration means single-wire, bi-wire or bi-amp, which depends on whether your speakers have one pair of binding posts or two. Termination means banana plugs, spades or bare wire, and the right answer is whatever your amplifier and speakers actually accept.

Most cables can be made to your exact length, either cut and terminated here or built to order by the manufacturer. You pay for the cable you need and nothing on top for making it up, though a small number are only available in fixed lengths and terminations. Burn-in on a Nordost Vidar is a free optional extra in 24 hour increments up to 96 hours. If you are not sure which cable suits your system, call or email us and we will tell you what we think.

4.95/5 from 20,728+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

252 of 394 products

Now Shopping by New Clear all
  • AudioQuest

    AudioQuest ThunderBird Zero Speaker Cable - Factory Terminated

    SKU: ThunderBird Zero

    £1,333.33
    Ex. VAT
    With the introduction of the Mythical Creatures series of speaker cables, AudioQuest has pushed significantly beyond even its own very high standards. By eliminating the Mythical Creatures speaker cable’s characteristic impedance, current compression and distortion of the signal (current) transient is significantly reduced. The result is dynamic contrast, transient response, and bass slam that are rendered seemingly without effort.
    View Available Worldwide Shipping Available
  • Tellurium Q Blue Jumper Cables - 2 Custom Pairs
    SALE

    Tellurium Q

    Tellurium Q Blue Jumper Cables - 2 Custom Pairs

    SKU: TQ Blue Jumpers - Custom

    £29.17 £37.50
    Ex. VAT ✓ Save £8.33

    Terminated by Future Shop engineers, the Tellurium Q Blue jumper cables offer exceptional performance when used in conjunction with TQs range of blue speaker cables. Terminated with silver-plated banana and spade plugs ensures a superior connection between your speaker's binding posts. With a length of 20cm, the TQ Blue jumper cables are the perfect addition to improve the performance of your speakers

    View Available
  • Furutech

    Furutech Jumperflux High-End Performance Speaker Jumper Cables

    SKU: Jumperflux

    £391.67
    Ex. VAT

    Most jumper cables supplied by speaker manufacturers are adequate for the job, but Furutech has never subscribed to being merely adequate. Furutech Speakerflux Jumper Cables use high-purity large diameter 6mm-squared α (Alpha) conductor for minimal internal impedance.

    View Available Worldwide Shipping Available
  • £329.17
    Ex. VAT

    Furutech’s α (Alpha) OCC‐DUCC is one of a select few of conductors that Furutech engineers have found to excel in sound reproduction. α (Alpha) OCC –DUCC is constructed using a combination of DUCC Ultra Crystallized High Purity Copper and Furutech’s world-famous Pure Transmission α (Alpha)-OCC.

    View Available Worldwide Shipping Available
  • Atlas Cables

    Atlas Achromatic Z-Plugs Screw - Individual Plug

    SKU: Achromatic Z Individual Plug

    £10.42
    Ex. VAT

    The Achromatic Z-plugs from Atlas are the next level in performance and appearance resulting from an accumulation of Atlas' electromechanical knowledge. This new approach to their Z-plug means Atlas can create a higher performance starting point for their speaker cables, eliminating variability in performance by refocusing on materials and assembly processes.

    View Available Worldwide Shipping Available
  • Nordost

    Nordost Odin 2 Speaker Cable - Factory Terminated Pair

    SKU: Odin 2 Speaker

    From
    £31,125.00
    Ex. VAT

    Nordost's Odin 2 range is the 'Supreme Reference' for top-of-the-range audiophile equipment. Each component of the Odin 2 range is meticulously crafted to ensure the most performance out of your system. The Odin 2 Speaker cable is designed to ensure the purest audio signal transfer to your speakers. The result is one of the cleanest, most realistic speaker cables for sound reproduction.

    View Available
  • Nordost

    Nordost Odin 2 Bi-Wire Jumpers

    SKU: Odin 2 Jumpers

    From
    £6,916.67
    Ex. VAT

    Nordost's Odin 2 range is the 'Supreme Reference' for top-of-the-range audiophile equipment. Each component of the Odin 2 range is meticulously crafted to ensure the most performance out of your system. The Odin 2 Bi-Wire Jumpers matches perfectly with the Odin 2 speaker cables to pull your system together and offer the most optimal signal transfer in your speakers.

    View Available
  • Wireworld

    Wireworld Stream 8 Speaker Cable - Factory Terminated Pair

    SKU: Wireworld Stream 8

    From
    £141.62
    Ex. VAT
    As the most affordable DNA Helix speaker cable, Stream 8 provides cleaner and punchier sound than other cables twice its size. This cable provides the same class leading sound quality as Helicon 16 OFC in a durable round cable that’s great for installations.
    View Available Worldwide Shipping Available
  • Chord Leyline4X Installation Speaker Cable - 152m Drum
    SALE

    Chord Company

    Chord Leyline4X Installation Speaker Cable - 152m Drum

    SKU: LEY0096

    £1,710.00 £1,900.00
    Ex. VAT ✓ Save £190.00

    Leyline4X has been designed to bring out the best performance from today’s increasingly sophisticated yet affordably priced electronics and loudspeakers and provide consistent and reliable service in environments where cables may be non-removable. Chord's latest XLPE dielectric brings a huge improvement over the previous (and more commonly used) PVC. This move follows the successful introduction of Taylon® as a phase-stable insulation material in the flagship SarumT and ChordMusic speaker cables and the subsequent roll-out of XLPE across their speaker cable ranges.

    View Available
  • Atlas Cables

    Atlas Arran Speaker Cable - Factory Terminated

    SKU: Arran Speaker

    From
    £1,651.67
    Ex. VAT

    Atlas have been working tirelessly to create a new range of cables that can offer the exceptional performance levels of the Asimi range, however, utilising their expertise in OCC Copper to deliver a more natural, open sound profile. Enter the Arran cable. With 6 solid OCC Copper conductors, a helical cotton spiral/PTFE dielectric, and double screened dual drain system, the Atlas Arran cables offer the best of Atlas' cable technology at an excellent value for money.

    View Available Worldwide Shipping Available
  • Kordz

    Kordz ONE Series 16/2 LSZH Speaker Cable - 305m Drum

    SKU: ONE-SP162

    £308.33
    Ex. VAT
    Kordz ONE Series Speaker Cable is engineered to flow without snags, twisting or curling for high-quality audio performance and connection longevity in AV installations, and its robust materials feature an easy-glide outer jacket with low smoke and zero halogen emission construction.
    View Available Worldwide Shipping Available
  • £1.92
    Ex. VAT

    Kordz ONE Series Speaker Cable is engineered to flow without snags, twisting or curling for high-quality audio performance and connection longevity in AV installations, and its robust materials feature an easy-glide outer jacket with low smoke and zero halogen emission construction.

    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

Start by considering your amplifier and speakers. For short runs or compact systems, basic oxygen-free copper cables may suffice. But if you're after tighter bass, better detail or a wider soundstage, an upgrade to a higher-quality cable, like those from Chord Company, AudioQuest or Atlas, can make a noticeable difference. For personalised recommendations, speak to our consultants here.

Yes. Bi-wire cables separate the signal paths for high and low frequencies, which can improve control and reduce interference in compatible speakers. Single-wire cables are suitable for most systems, but bi-wire setups can offer sonic gains if your speakers and amp support them. Alternatively, you can use single-wire cables with matching jumper cables on bi-wirable speakers.

Higher-end cables often use better conductors, insulation materials, and terminations, which can reduce signal loss and interference. Whether it's worth the investment depends on your system's resolution and your listening environment. Our team can help you choose based on your priorities.

Yes, cable length can influence performance. Longer runs can introduce resistance and signal loss, especially with thinner cables. Where possible, try to keep left and right channel lengths similar, and choose an appropriate gauge for the distance.

Jumper cables replace the metal links between binding posts on bi-wireable speakers. Stock jumpers can limit performance, while high-quality alternatives preserve signal integrity and improve coherence across frequencies. When replacing your manufacturer supplied links, we recommend to use jumper cables of equal or better quality than your speaker cable.

All cables matter, and your system will require good quality cables for all of it's connections, however, if you were looking for the cable which will make the biggest difference, then we would recommend looking at the power cables from your wall socket, to your distribution block and/or amplifier. More often than not, we hear from customers, manufacturers, and our own tests that higher quality power cables can have a significant impact of the quality of your system.

This entirely depends on your current system and your expectations. You could have a decent pair of speakers which are not matched correctly with your amplifier, or vice versa. Similarly, you may want a new source of media to listen to. There are also options to upgrade other aspects of your system, such as the power, isolation or cabling to get the most out of your system before upgrading the traditional components. The best way to find out your own upgrade path is to contact our consultants and we would be happy to help you.

In short, yes, although, this depends on the quality of the cable and your speakers/amplifier. High quality speaker cables tend to be manufactured with 4 key areas, their conductor, dielectric, shielding and geometry. Each of these areas can optimise signal retention from your amplifier to your speakers. Cheaper speaker cables can use lower quality conductors (tin-plated copper or even steel-clad copper), with basic dielectrics (PVC), no shielding and minimal strands with no geometry. More expensive speaker cables start to introduce higher quality conductors (Oxygen-free Copper, Ohno Continuous Cast Copper, Silver-plated Copper or even Pure Silver), better dielectrics (XLPE, PTFE, Teflon etc.), different amounts of shielding (foil, ofc-braid, carbon etc) and various geometries (solid-core, different twists, higher gauges etc.). There are diminishing returns to consider between your speaker cable and your system, as well as the potential of bottle-necks in your system if you use a lower quality cable. All of these factors help to maintain signal integrity, reduce loss, and ensure that your amplifier and speaker are performing as intended.

Loading...
Loading...
loader
Loading...