RCA Interconnects

The standard single-ended connection between sources and amplifiers. Available in stock lengths from 0.5m, or cut to any length you need at no extra cost.

252 products Award Winning Dealer Since 2013 Free expert consultation

Choosing an RCA interconnect

An RCA interconnect sits at the lowest signal level in the system, which is why differences between cables are often clearer here than further downstream. Shielding, dielectric and plug quality all have an audible effect, particularly in a resolving system.

Match the cable to the system rather than to the price list. On a modest system, a well made entry level cable removes obvious problems like hum and dullness, and further spending has diminishing returns. On a system with good speakers and a capable source, the step up through a manufacturer's range is usually clear and repeatable.

Buy the shortest length that reaches comfortably, and avoid coiling excess cable behind the rack. Keep interconnects off mains leads where possible, and cross rather than run parallel where they have to meet. If you are not sure whether a step up is worthwhile in your system, tell us what you are running and we will give you an honest answer. 

4.95/5 from 20,731+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

5 of 5 products

Now Shopping by New Rhodium Clear all
  • Furutech

    Furutech LineFlux NCF 2 RCA to 2 RCA Audio Cable Pair - 1.2m

    SKU: LineFlux NCF

    £1,562.50
    Ex. VAT
    The LineFlux was already Furutech's top-of-the-line analogue interconnect, but the additional implementation of their proprietary NCF technology means an even more transparent performance by eliminating static and allowing thermal energy to be converted into far infrared.
    View Available Worldwide Shipping Available
  • Furutech FT-903 High End Performance RCA Socket - Rhodium - Pair
    NEW

    Furutech

    Furutech FT-903 High End Performance RCA Socket - Rhodium - Pair

    SKU: FT-903(R)

    £55.83
    Ex. VAT

    The Furutech FT-903 Rhodium is a pair of chassis-mount RCA sockets with rhodium-plated α (Alpha) pure copper contacts, a heat-resistant Liquid Crystal Polymer housing and a damped chassis nut, for soldered installation.

    View Available Worldwide Shipping Available
  • Furutech FT-909 High End Performance PCB RCA Socket - Rhodium - Pair
    NEW
    £62.50
    Ex. VAT

    The Furutech FT-909 Rhodium is a pair of PCB-mount RCA sockets with rhodium-plated α (Alpha) pure copper contacts and a heat-resistant Liquid Crystal Polymer housing, made to solder directly to a circuit board.

    View Available Worldwide Shipping Available
  • Furutech FP-901 High End Performance RCA Sockets - Rhodium - Pair
    NEW
    £100.83
    Ex. VAT

    The Furutech FP-901(R) is a pair of rhodium-plated panel-mount RCA sockets with centre and return contacts milled from single pieces of Alpha pure copper, a black eutectic brass housing and insulation for any panel thickness.

    View Available Worldwide Shipping Available
  • Furutech FP-908 High End Performance RCA Sockets - Rhodium - Pair
    NEW
    £117.50
    Ex. VAT

    The Furutech FP-908(R) is a pair of rhodium-plated PCB-mount RCA sockets with an Alpha pure copper centre conductor, a lead-free Alpha copper alloy body and red and white nylon and fibreglass insulation.

    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

RCA cables carry unbalanced signals, while XLR cables carry balanced signals that reject noise and interference. XLR is preferred for longer runs and professional-grade audio systems.

If you have a system which accepts both XLRs and RCAs, we would typically recommend using the XLR connections, as they offer a lower noise floor. However, if you system is pre-dominantly RCAs, then we would recommend sticking with RCAs throughout your system, rather than mixing and matching.

Yes. Build quality, conductor material, shielding, and connector quality can influence noise levels, clarity, and overall tonal balance, especially in resolving systems.

Use the shortest practical length to minimise signal loss and interference. Longer runs benefit from better shielding and low‑capacitance designs.

Yes, but turntables require low‑capacitance phono cables designed for moving‑magnet or moving‑coil cartridges. Standard line‑level RCA cables are not always suitable.

Loading...
Loading...
loader
Loading...