RCA Interconnects

The standard single-ended connection between sources and amplifiers. Available in stock lengths from 0.5m, or cut to any length you need at no extra cost.

252 products Award Winning Dealer Since 2013 Free expert consultation

Choosing an RCA interconnect

An RCA interconnect sits at the lowest signal level in the system, which is why differences between cables are often clearer here than further downstream. Shielding, dielectric and plug quality all have an audible effect, particularly in a resolving system.

Match the cable to the system rather than to the price list. On a modest system, a well made entry level cable removes obvious problems like hum and dullness, and further spending has diminishing returns. On a system with good speakers and a capable source, the step up through a manufacturer's range is usually clear and repeatable.

Buy the shortest length that reaches comfortably, and avoid coiling excess cable behind the rack. Keep interconnects off mains leads where possible, and cross rather than run parallel where they have to meet. If you are not sure whether a step up is worthwhile in your system, tell us what you are running and we will give you an honest answer. 

4.95/5 from 20,731+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

228 of 243 products

Now Shopping by New Clear all
  • Entreq

    Entreq Primer Core RCA and XLR Analogue Signal Cable

    SKU: Primer Core RCA and XLR Analogue Signal Cable

    From
    £450.00
    Ex. VAT
    The Entreq Primer Core Analogue Signal Cable is a hand-made analogue interconnect built around Entreq's Energy Reference System (ERS) and Corepoint technology. Every cable is supplied with a Corepoint Signal unit and is available with RCA or XLR terminations. It is the entry point to Entreq's new cable architecture, carrying analogue signal between components cleanly and coherently.
    View Available Worldwide Shipping Available
  • Entreq

    Entreq Delphius RCA and XLR Analogue Signal Cable 

    SKU: Delphius RCA / XLR

    From
    £1,666.67
    Ex. VAT
    The Entreq Delphius Analogue Signal Cable is a hand-made Swedish analogue interconnect built around Entreq's new Energy Reference System (ERS) and Corepoint technology. Copper and silver conductors run in a cotton dielectric alongside a separately shielded silver ERS wire, and every cable is supplied with a Corepoint Signal unit. It is available with RCA or XLR terminations in 1.1m and 1.65m standard lengths.
    View Available Worldwide Shipping Available
  • Entreq

    Entreq Olympus Core Signal Cable

    SKU: Entreq Olympus Core Signal Cable

    From
    £10,000.00
    Ex. VAT
    The Entreq Olympus Signal Cable is a hand-crafted analogue interconnect available with RCA or XLR terminations, built using Entreq's triple EEDS construction. It combines copper, silver, wood and cotton, materials chosen to give the cable its own character. Like all Olympus cables it requires an accompanying Entreq ground box, sold separately, to work as intended.
    View Available Worldwide Shipping Available
  • Nordost White Lightning 3 RCA
    NEW

    Nordost

    Nordost White Lightning 3 RCA Analogue Cable Pair 1m Ex-Demo

    SKU: 3WLINTRCA-ex-demo

    £290.41 £341.67
    Ex. VAT ✓ Save £51.26

    The Nordost White Lightning 3 RCA Analogue Cable, featuring silver-plated OFC conductors and high-grade FEP insulation, delivers high-speed transmission and minimal signal loss for pristine audio quality. Designed to reduce noise and maintain signal integrity, this cable is perfect for audiophiles seeking exceptional performance from their audio setup.

    View Available Worldwide Shipping Available
  • QED Performance Audio Cable
    NEW

    QED

    QED Performance Audio Cable

    SKU: QED Performance Audio Cable

    From
    £40.83
    Ex. VAT
    The QED Performance Audio is a stereo RCA interconnect for connecting CD players, DACs, tuners and other analogue sources to an amplifier. Each channel has two isolated solid-core 99.999% OFC conductors of different diameters, shielded by a dual electrostatic screen and an overall Zn/Mn ferrite jacket, and finished with gold-plated QED phono plugs. Available in 0.75m, 1.5m and 3.0m.
    View Available Worldwide Shipping Available
  • Merlin Tarantula RCA Analogue Interconnect Cable
    NEW

    Merlin Cables

    Merlin Tarantula RCA Analogue Interconnect Cable

    SKU: Tarantula-RCA

    From
    £75.00
    Ex. VAT
    The Merlin Tarantula RCA is a four-core interconnect built with 4N copper conductors, XLPE insulation and dual-layer shielding, delivering a full-bodied, natural sound with UK hand-termination for consistent quality.
    View Available Worldwide Shipping Available
  • Atlas Element R1 2 RCA to 2 RCA Audio Cable Pair
    NEW

    Atlas Cables

    Atlas Element R1 2 RCA to 2 RCA Audio Cable Pair

    SKU: Element RCA R1

    From
    £80.00
    Ex. VAT

    The Atlas Element RCA R1 is an entry-level stereo interconnect pairing a shielded OCC copper conductor with low-mass, cold-welded Integra RCA plugs for a quiet background and a neutral, detailed sound.

    View Available Worldwide Shipping Available
  • Atlas Hyper Duo 5 Pin DIN Audio Cable
    NEW

    Atlas Cables

    Atlas Hyper Duo 5 Pin DIN Audio Cable

    SKU: Hyper Duo DIN

    From
    £515.00
    Inc. VAT

    The Atlas Hyper Duo 5 Pin DIN Audio Cable joins DIN-equipped hi-fi to RCA, XLR or DIN inputs, using OCC copper conductors, PEF insulation and Atlas's dual-drain screen to keep noise out of the signal.

    View Available Free delivery
  • Atlas Ailsa Duo 5 Pin DIN Audio Cable
    NEW

    Atlas Cables

    Atlas Ailsa Duo 5 Pin DIN Audio Cable

    SKU: Ailsa Duo DIN

    From
    £1,295.83
    Ex. VAT

    The Atlas Ailsa Duo 5 Pin DIN Audio Cable connects DIN-equipped hi-fi to RCA, XLR or DIN inputs, using Atlas's balanced core geometry, OCC copper and a dual-drain foil and braid screen.

    View Available Worldwide Shipping Available
  • Furutech FT-903 High End Performance RCA Socket - Gold - Pair
    NEW

    Furutech

    Furutech FT-903 High End Performance RCA Socket - Gold - Pair

    SKU: FT-903(G)

    £55.83
    Ex. VAT

    The Furutech FT-903 Gold is a pair of chassis-mount RCA sockets with 24k gold-plated α (Alpha) pure copper contacts, a heat-resistant Liquid Crystal Polymer housing and a damped chassis nut, for soldered installation.

    View Available Worldwide Shipping Available
  • Furutech FT-903 High End Performance RCA Socket - Rhodium - Pair
    NEW

    Furutech

    Furutech FT-903 High End Performance RCA Socket - Rhodium - Pair

    SKU: FT-903(R)

    £55.83
    Ex. VAT

    The Furutech FT-903 Rhodium is a pair of chassis-mount RCA sockets with rhodium-plated α (Alpha) pure copper contacts, a heat-resistant Liquid Crystal Polymer housing and a damped chassis nut, for soldered installation.

    View Available Worldwide Shipping Available
  • Furutech FT-909 High End Performance PCB RCA Socket - Gold - Pair
    NEW
    £62.50
    Ex. VAT

    The Furutech FT-909 Gold is a pair of PCB-mount RCA sockets with 24k gold-plated α (Alpha) pure copper contacts and a heat-resistant Liquid Crystal Polymer housing, made to solder directly to a circuit board.

    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

RCA cables carry unbalanced signals, while XLR cables carry balanced signals that reject noise and interference. XLR is preferred for longer runs and professional-grade audio systems.

If you have a system which accepts both XLRs and RCAs, we would typically recommend using the XLR connections, as they offer a lower noise floor. However, if you system is pre-dominantly RCAs, then we would recommend sticking with RCAs throughout your system, rather than mixing and matching.

Yes. Build quality, conductor material, shielding, and connector quality can influence noise levels, clarity, and overall tonal balance, especially in resolving systems.

Use the shortest practical length to minimise signal loss and interference. Longer runs benefit from better shielding and low‑capacitance designs.

Yes, but turntables require low‑capacitance phono cables designed for moving‑magnet or moving‑coil cartridges. Standard line‑level RCA cables are not always suitable.

Loading...
Loading...
loader
Loading...