AV Extenders
HDMI and AV extenders over Cat6, HDBaseT, fibre and wireless, carrying video with audio, USB, IR and RS232 where required.
Shop by Brand
Getting a signal across a building
An extender sends HDMI further than a cable can reliably carry it, by converting the signal for transmission over structured cable or fibre and converting it back at the far end. It is a transmitter and receiver pair, and both ends have to match.
Choose the transport by distance and by what the building already has. HDBaseT over Cat6a covers most residential distances and carries control signals alongside the video, which saves running separate cable for IR or RS232. Fibre goes further and is immune to electrical interference, which suits long runs and noisy environments. Wireless solves rooms where no cable can be run, at the cost of latency and reliability compared with a wired link.
Two things to confirm before ordering: the resolution and refresh rate the extender supports at the distance you actually need, since ratings usually drop at longer runs, and whether the receiver is powered locally or over the cable. Cat cable quality matters more here than in a data network, and solid core Cat6a correctly terminated is the baseline. Tell us the distance and what has to travel with the video.
-
£394.99Ex. VAT -
£294.63Ex. VATThe IP50HD-TX is the new upgrade on Blustream's previous Video-over-IP product, and is compatible with the existing ACM200 control module and software. It can operate as matrix distribution when used with a network switch, or as a one-to-one HDMI extender without one. This product is also designed to be used with a compatible receiver.
-
£330.86Ex. VAT
The Blustream IP50HD-RX is a 1080p HD video over IP receiver from the Contractor Series, using H.265 compression to carry HDMI, bi-directional IR, RS-232 and USB for KVM over a standard 100Mbps network at distances up to 100 metres. It scales video to 1080p@60Hz, supports both unicast and multicast, and includes analogue audio breakout. Power comes from PoE or a local 12V supply.
PLEASE NOTE THIS IS RECEIVER ONLY.
This comes without power supply.
-
£695.00Ex. VATCompatible with the pre-existing IP200 products, the IP250UHD-TX is capable of transmitting 4K HDCP 2.2 HDMI signals losslessly up to distances of 100m using HDMI or Ethernet, and even further using its SFP output! The IP250UHDTX also features Dante integration and can be powered locally or via PoE from the network switch. -
£715.00Ex. VATDesigned for use with the IP250UHD-TX but still compatible with the pre-existing IP200 products, the IP250UHD-RX is capable of receiving 4K HDCP 2.2 HDMI signals losslessly up to distances of 100m using HDMI or Ethernet, and even further using its SFP input! The IP250UHD-RX also features Dante integration and can be powered locally or via PoE from the network switch.
PLEASE NOTE THIS IS RECEIVER ONLY.
This comes without power supply.
-
£669.00Inc. VATThe HEX18G-Kit by Blustream is the first extender set using the new VS3000 HDBaseT chipset, which means totally uncompressed HDMI 2.0 4k 60Hz 4:4:4 over distances up to 100m over a single CAT6A cable! This kit also features bi-directional PoC (power over cable), meaning that only one of the units needs to be connected to a power source. -
£444.17Ex. VATThe HEX70USB-KIT is Blustream's new HDBaseT extender set that integrates USB 2.0 compatibility, allowing you to connect and control USB Type-B connected devices such as keyboards, webcams or microphones. This kit is capable of sending HDMI signal at 4K UHD up to 40m, or 1080p up to 70m and features PoC (power over cable) meaning that only the transmitter or receiver needs to be connected to a power source. -
£766.66Ex. VATThe AVX-101F-KIT 4K UHD+ HDMI over Fiber KIT is designed for high-quality AV extension with minimal latency thanks to AVX technology. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K@60Hz (4:4:4) HDMI audio/video streams. -
£336.67Ex. VATThe UEX100E-KIT is a USB extender kit utilising HDBaseT™ technology to extend USB 2.0 data, 2ch analogue audio, and control signals up to 100m over a single CAT cable. -
£675.00Ex. VATThe HEX18GARC-KIT extender set is an industry leading uncompressed, unconverted HDMI 2.0 4K 60Hz 4:4:4 HDCP 2.3/2.2 solution utilising the latest in HDBaseT™ technology. The HEX18GARC-KIT supports uncompressed distribution of the latest HDR resolutions including HDR10/10+ and Dolby Vision resulting in the ultimate in picture quality for your critical viewing areas. -
£1,093.33Ex. VATThe HEX70HDUK-KIT extender set is an industry leading HDMI2.0 4K 60Hz 4:4:4 (18Gbps) HDCP2.2 HDBaseT™ multi-format solution utilising CSC technology to deliver HDMI, USB-C and DisplayPort™ up to lengths of 40m (70m at 1080p) over a single CAT cable. The HEX70HDUK-KIT provides enhanced features including USB 2.0 extension, local HDMI input on the HDBaseT™ Receiver for additional source input, web-GUI for control and configuration, auto display control, audio breakout and bi-directional IR pass-through. -
£427.50Ex. VATThe CEX4K-KIT HDMI extender set offers HDMI distribution over a single Coaxial cable. The product delivers HDMI & Bi-directional IR up to lengths of 100m @ 4K 60Hz 4:4:4
