Matrix & Switchers
HDMI matrix units, switchers, HDBaseT matrices and multi-viewers in 2x2 through to 16x16 configurations, from Blustream, CYP, Gefen and SEADA.
Shop by Brand
Sizing a matrix correctly
A matrix lets any source reach any display independently. A switcher selects between sources for a single display. If two rooms need to watch different things at the same time, you need a matrix, and no amount of splitting will substitute for one.
Size on inputs and outputs, then add headroom. A 4x4 with all four inputs used leaves nothing for the next source you buy, and expanding later usually means replacing the unit rather than adding to it. HDBaseT matrices send each output over Cat6 or Cat6a to a receiver at the display, which is how most whole house systems are wired.
Check bandwidth support against what the sources actually output. A matrix rated for 4K at 60Hz will not pass 4K at 120Hz from a games console, and the symptom is usually a blank screen rather than a helpful error message. Confirm HDCP version support, EDID management, and whether audio is extracted at the matrix or at each receiver. Send us the room layout and source list and we will specify it.
-
£2,082.50Ex. VATThe MS-HBTB66C70 HDBaseT™ Matrix Switcher Kit supports 4K HDMI, audio, IR, RS232, and PoC over 70m via a single CAT cable. With 18 audio inputs, 12 outputs, and full audio control, it suits both residential and commercial setups. Includes 4 HDBaseT receivers. -
£500.00Ex. VATThe MS-HBTB66C70 HDBaseT™ Matrix Switcher Kit supports 4K HDMI, audio, IR, RS232, and PoC over 70m via a single CAT cable. With 18 audio inputs, 12 outputs, and full audio control, it suits both residential and commercial setups. Includes 4 HDBaseT receivers.
-
£1,250.00Ex. VATThe MS-HDM88 Matrix Switcher routes 4K HDCP 2.2 signals from 8 HDMI sources to 8 displays. It supports ARC, downscaling, and analog/coaxial audio de-embedding. Multiple control methods ensure seamless operation.
-
£500.00Ex. VATThe MS-MV51B is a 4K presentation switcher featuring 4 HDMI and 1 VGA (YPbPr, CVBS) input with HDMI output. It includes a built-in scaler for seamless resolution adjustment, delivering sharp, consistent video across all sources—ideal for pro AV environments. -
£250.00Ex. VATThis HDMI/USB KVM Extender transmits HDMI and USB signals up to 164ft over a single Cat5e/6 cable with zero latency. It supports HDMI 1.4b, USB 2.0, and two-way POC, requiring power from only one end.
-
£707.92Ex. VATExtend HDMI, USB, IR, RS232, and audio signals up to 328ft with this HDMI USB KVM Extender. It supports HDBaseT transmission, LAN connectivity, and two-way USB control, offering flexible operation from either source or display side. -
£343.33Ex. VATThe Blustream CMX42CS is a 4x2 HDMI 2.0 matrix switch supporting 4K at 60Hz 4:4:4, HDCP 2.2, and two independent outputs. Ideal for custom AV installations in homes or commercial spaces, it ensures dependable UHD signal distribution. -
£580.00Ex. VATBlustream's new CMX44CS-V2 replaces the previous CMX44CS, adding Optical S/PDIF & phoenix audio breakout. The CMX44CS-V2 supports HDMI2.0 with HDCP2.2, allowing distribution of four HDMI sources to four displays. This enables all sources to be viewed as required within a matrix configuration.
-
£630.00Ex. VATThe HSP14CS-V2 4K HDBaseT™ CSC splitter allows a single HDMI 2.0 4K 60Hz 4:4:4 source to be distributed to four simultaneous HDBaseT™ outputs, delivering exceptional flexibility for single source distribution environments. Independent downscaling on each output ensures displays limited to lower video resolutions can receive optimised video signals, while compatible screens continue to display the native 4K UHD content.
-
£1,075.00Ex. VATThe Blustream WMF72-V2 is an advanced 4K wireless multi-format presentation switch supporting HDMI, USB-C, AirPlay, Miracast, and Chromecast inputs to dual HDMI outputs, with multiview presentation, built-in video scaling, dual LAN, and web-GUI control. -
£62.49Ex. VATThe CYP RAX-B-300 is a 3U blanking plate for the RAX-300 modular equipment rack, designed to fill unused rack space and tidy the front of an AV installation. Its open-frame construction also provides a dedicated mounting point for the RAX-FAN-300 cooling fan, allowing airflow to be added exactly where it is needed. Compact and lightweight, it helps keep components neatly housed and easy to access for servicing in both point-to-point and multi-zone systems.
-
£92.49Ex. VATThe CYP RAX-FAN-300 is a 3U cooling fan unit designed for the RAX-300 rack system. It mounts neatly into the rack to draw heat away from densely packed AV components such as extenders, repeaters and breakout boxes, helping maintain reliable operation in complex installations. Power is drawn from a compatible RAX-PSU, and the unit is TAA compliant and backed by a five year warranty.
