Blocks & Conditioners
Distribution blocks, filtered conditioners and combined units in four to ten socket configurations, from Atlas, Chord, ISOL-8, IsoTek, PLiXiR, PS Audio, Shunyata and Synergistic Research.
Block or conditioner? The difference explained
A power block is a distribution point. It takes one feed from the wall and provides several sockets, using better internal wiring and connectors than a domestic extension lead, and it puts every component on a common earth reference. It does not filter.
A conditioner adds filtering, and sometimes surge protection, isolation transformers or full regeneration. The filtering removes high frequency mains noise, which typically lowers the noise floor and can improve stereo imaging. The trade off is that filtering in series with a power amplifier can restrict current on dynamic peaks and leave the system sounding flat.
The common arrangement solves both problems: filtered outlets for sources and digital equipment, and an unfiltered or high current outlet for the power amplifier. Many units are built exactly that way. Count the components you need to plug in, note which of them are amplifiers, and check the socket type your mains cables use. Tell us what the system is and we will recommend the configuration rather than the most expensive box.
-
£229.17Ex. VAT
The Furutech Flow-8.1 NCF is an in-line AC power filter for components with a figure 8 (C7) mains inlet, such as CD players, streamers, DACs and network devices. It fits between your power cable and the component, filtering noise through Furutech's AC-1501(R) EMI filter (around 10dB at 1MHz and over 30dB at 10MHz), with Neo Damper and NCF vibration control and an FI-8.1N NCF(R) rhodium-plated figure 8 plug on a 60cm lead. Rated 10A at 250V.
-
£516.67Ex. VAT
The Furutech e-TP60E NCF is a six-outlet Schuko power distributor with rhodium-plated FI-E30 NCF sockets, an FI-06 NCF(R) IEC inlet and Formula GC-303 EMI absorption, upgrading the standard e-TP60e's gold-plated parts.
-
£7,604.17Ex. VAT
The Furutech NCF Power Vault-E is an eight-socket Schuko mains distributor with a machined aluminium chassis, rhodium-plated FI-E30 NCF(R) sockets, Alpha-OCC wiring and GC-303 noise absorption. Furutech make no UK-socket version.