Blocks & Conditioners

Distribution blocks, filtered conditioners and combined units in four to ten socket configurations, from Atlas, Chord, ISOL-8, IsoTek, PLiXiR, PS Audio, Shunyata and Synergistic Research.

134 products Award Winning Dealer Since 2013 Free expert consultation

Block or conditioner? The difference explained

A power block is a distribution point. It takes one feed from the wall and provides several sockets, using better internal wiring and connectors than a domestic extension lead, and it puts every component on a common earth reference. It does not filter.

A conditioner adds filtering, and sometimes surge protection, isolation transformers or full regeneration. The filtering removes high frequency mains noise, which typically lowers the noise floor and can improve stereo imaging. The trade off is that filtering in series with a power amplifier can restrict current on dynamic peaks and leave the system sounding flat.

The common arrangement solves both problems: filtered outlets for sources and digital equipment, and an unfiltered or high current outlet for the power amplifier. Many units are built exactly that way. Count the components you need to plug in, note which of them are amplifiers, and check the socket type your mains cables use. Tell us what the system is and we will recommend the configuration rather than the most expensive box.

4.95/5 from 20,731+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

120 of 131 products

Now Shopping by New Clear all
  • IsoTek V5 Syncro Uni 10 DC Blocker with Initium Cable
    SALE

    IsoTek

    IsoTek V5 Syncro Uni 10 DC Blocker with Initium Cable

    SKU: V5 Syncro Uni 10 Initium Cable

    From
    £570.00 £600.00
    Ex. VAT ✓ Save £30.00
    The IsoTek V5 Syncro Uni 10 eliminates DC interference from the mains, reducing transformer hum and vibration while enhancing sound clarity and dynamics. With a 60% increase in current capacity, it supports up to 16A peak current and features 6n OFC silver-plated wiring with FEP dielectric for optimal power delivery. Compatible with multiple power systems, it works as a standalone or pre-filter device, ensuring a cleaner, more stable power supply for audio, AV, and network components.
    View Available Worldwide Shipping Available
  • IsoTek V5 Syncro Uni 16 DC Blocker with Premier Cable
    SALE

    IsoTek

    IsoTek V5 Syncro Uni 16 DC Blocker with Premier Cable

    SKU: Syncro Uni 16-Premier Cable

    From
    £748.33 £787.50
    Ex. VAT ✓ Save £39.17
    The IsoTek V5 Syncro Uni 16 DC Blocker eliminates DC noise, rebalances the mains sine wave, and reduces transformer hum, enhancing sound quality and system performance. With increased current capability, advanced circuit design, and premium components, it lowers noise, improves dynamics, and extends equipment life. CALL TO ORDER.
    View Available Worldwide Shipping Available
  • Shunyata

    Shunyata Research Everest-X Power Distributor

    SKU: Everest X

    £13,125.00
    Ex. VAT
    The Shunyata Research Everest-X redefines power delivery for studios and audiophiles. As the next generation of the Everest 8000, it provides clean, noise-free power using advanced patented technology. Expect deeper silence, sharper resolution, and lifelike dynamics that reveal every musical detail. Everest-X transforms the listening experience by unlocking the full potential of any high-end system.
    View Available Worldwide Shipping Available
  • AudioQuest Niagara 1200 Noise-Dissipation System Mains Conditioner US Plug Special Offer - Black November Deal
    BLACK NOVEMBER
    £749.17 £915.83
    Ex. VAT ✓ Save £166.67

    Like the Niagaras 1000, 5000 and 7000, the Niagara 1200 uses capacitor forming technologies that vastly improve linearity and minimize distortion, ultra-low resistance solid-core wiring optimized for low-noise directionality, and low-impedance AC inlet and outlet contacts with heavy Hanging-Silver plating over high-purity Beryllium Copper for superior noise dissipation.

    View Available Worldwide Shipping Available
  • Shunyata

    Shunyata Research Delta-X UK Power Distributor

    SKU: DLT-X

    £4,162.50
    Ex. VAT
    The Delta-X seven-outlet power-distributor defines a new era of performance and value for mastering, recording and playback systems. Delta-X's ability to eliminate multiple forms of high-frequency noise while delivering maximum peak current to components make it an indispensable part of any system seeking the ultimate in performance.
    View Available Worldwide Shipping Available
  • From
    £582.50
    Ex. VAT
    The AudioQuest PowerQuest 505 is a high-performance power conditioner and non-sacrificial surge protector with 7 AC outlets, Ultra-Linear noise dissipation, Extreme Voltage Shutdown, and a detachable 2m PQ-715 power cable with ZERO-Tech and RF/ND-Tech noise reduction.
    View Available Worldwide Shipping Available
  • Blustream PWR2IEC 2 Port Managed IEC PDU
    NEW

    Blustream

    Blustream PWR2IEC 2 Port Managed IEC PDU

    SKU: PWR2IEC

    £210.00
    Ex. VAT
    The Blustream PWR2IEC is a 2 port managed IEC PDU offering outlet-level metering and switching for AV and IT installations. A single C14 inlet feeds two C13 outlets rated to 10A, with control available over TCP/IP, RS-232, GPI or the front panel. A two-channel watchdog monitors connected devices and restarts them automatically, keeping systems running without a site visit.
    View Available Worldwide Shipping Available
  • Furutech Flux-C15 NCF In-line Power Filter
    NEW

    Furutech

    Furutech Flux-C15 NCF In-line Power Filter

    SKU: Flux-C15 NCF

    £1,008.33
    Ex. VAT
    The Furutech Flux-C15 NCF is an in-line AC power filter with a slimline IEC connector, designed to fit where a conventional filter cannot: directly against slim-profile video equipment such as 4K and 8K televisions. It carries the same AC-1501R EMI filter as the Flux-50, cutting noise by 10dB at 1MHz and over 30dB at 10MHz, with NCF anti-static damping throughout. Rated 15A at 125V or 10A at 250V.
    View Available Worldwide Shipping Available
  • IsoTek V5 Syncro Uni 16 DC Blocker Black UK Version - Ex-Demo
    NEW

    IsoTek

    IsoTek V5 Syncro Uni 16 DC Blocker Black UK Version - Ex-Demo

    SKU: Syncro Uni 16 ex demo

    £464.16
    Ex. VAT
    The IsoTek V5 Syncro Uni 16 DC Blocker eliminates DC noise, rebalances the mains sine wave, and reduces transformer hum, enhancing sound quality and system performance. With increased current capability, advanced circuit design, and premium components, it lowers noise, improves dynamics, and extends equipment life.
    View Out of Stock Worldwide Shipping Available
  • ISOL-8 Axis 10 DC Blocker
    NEW

    ISOL-8

    ISOL-8 Axis 10 DC Blocker

    SKU: Axis 10

    £540.83
    Ex. VAT
    The ISOL-8 Axis 10 is a stand-alone inline DC blocker that removes DC offset from the mains supply before it reaches a hi-fi component, tackling one of the most common causes of transformer hum. Rated at 10A with an IEC C14 inlet and a single outlet, the Axis 10 is wired internally with silver plated PTFE wiring and is hand built in England.
    View Available Worldwide Shipping Available
  • ISOL-8 Axis 20 DC Blocker
    NEW

    ISOL-8

    ISOL-8 Axis 20 DC Blocker

    SKU: Axis 20

    £749.17
    Ex. VAT
    The ISOL-8 Axis 20 is the Reference stand-alone inline DC blocker in ISOL-8's Axis series, removing DC offset from the mains supply to tackle transformer hum in hi-fi components. Rated at 16A with a rhodium plated pure copper IEC C20 inlet and a single outlet, the Axis 20 is ISOL-8's audiophile-grade DC blocking solution, hand built in England.
    View Available Worldwide Shipping Available
  • ISOL-8 SubStation F3 Power Conditioner in Black
    NEW

    ISOL-8

    ISOL-8 SubStation F3 Mains Conditioner

    SKU: ISOL-8 SubStation F3 Mains Conditioner

    From
    £2,062.50
    Ex. VAT
    The ISOL-8 SubStation F3 is a full-size mains power conditioner built to give high-end hi-fi systems a cleaner, more stable supply. Six outlets, transmodal filtering, surge protection and pure copper internal conductors provide a quieter foundation for premium components, and an Axis version adds DC blocking for systems troubled by transformer hum. The SubStation F3 is designed and hand built in England.
    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

IsoTek power conditioners remove noise and interference from your mains supply while providing surge protection for your system. This ensures your hi-fi or AV equipment receives clean, stable power, improving dynamics, detail, and overall performance.

IsoTek uses advanced passive components and proprietary design techniques to filter out mains interference and isolate components from electrical “cross‑talk.” This results in a cleaner, more stable supply, reducing noise, tightening dynamics, and delivering greater clarity and musical detail.

PLiXiR uses balanced power technology to reduce common-mode noise and ground loop issues at the source. This results in a more natural sound, a quieter background, and improved dynamics compared to standard conditioners.

Yes. Larger models such as the Elite BAC 1500 and above are built to handle integrated and power amplifiers, ensuring stable current delivery without limiting dynamics or musical expression.

Unlike many conditioners that restrict current, Shunyata’s distributors deliver clean power without limiting dynamics. Technologies developed for the Venom, Hydra, Denali, and Everest ranges ensure lower noise floors, blacker backgrounds, and more natural sound, benefits that audiophiles and professionals alike can hear instantly.

Unlike traditional power conditioners that only filter noise, PS Audio mains regenerators rebuild the AC waveform entirely. This gives your system a supply of clean, consistent power, free from voltage dips or distortion, resulting in improved dynamics and detail.

The Stellar Power Plant 3 is ideal for smaller systems or dedicated front-end components such as DACs, preamps, and streamers. It provides the same clean regenerated power found in larger models but in a more compact and affordable form.

A power block is the simplest solution. It distributes mains power safely to multiple components, often with improved internal wiring and better mechanical stability than standard extension leads.

A power conditioner goes further by filtering electrical noise and interference present on the mains supply. This can lower the noise floor and help systems sound cleaner and more controlled, especially in electrically noisy homes.

A power regenerator actively rebuilds the incoming mains supply into a new, stable waveform before feeding your system. Regenerators are typically used in higher-resolution systems where maximum consistency, stability, and noise reduction are required.

This depends on the components being powered and the levels of noise within your local mains connections. There is equipment available to measure the noise in your mains, however, one of the easiest ways is to try a power conditioner for your source components and hear if there is any difference during your listening. If there is minimal to no difference, then a good quality power block may be your best option.

Loading...
Loading...
loader
Loading...