Blocks & Conditioners
Distribution blocks, filtered conditioners and combined units in four to ten socket configurations, from Atlas, Chord, ISOL-8, IsoTek, PLiXiR, PS Audio, Shunyata and Synergistic Research.
Shop by Brand
Block or conditioner? The difference explained
A power block is a distribution point. It takes one feed from the wall and provides several sockets, using better internal wiring and connectors than a domestic extension lead, and it puts every component on a common earth reference. It does not filter.
A conditioner adds filtering, and sometimes surge protection, isolation transformers or full regeneration. The filtering removes high frequency mains noise, which typically lowers the noise floor and can improve stereo imaging. The trade off is that filtering in series with a power amplifier can restrict current on dynamic peaks and leave the system sounding flat.
The common arrangement solves both problems: filtered outlets for sources and digital equipment, and an unfiltered or high current outlet for the power amplifier. Many units are built exactly that way. Count the components you need to plug in, note which of them are amplifiers, and check the socket type your mains cables use. Tell us what the system is and we will recommend the configuration rather than the most expensive box.
-
Connected Fidelity
Connected Fidelity AC-2K Studio Balanced Power ConditionerSKU: Connected Fidelity AC-2K Power Conditioner-AC-2K Studio
£1,662.50Ex. VATThe Connected Fidelity AC-2K Studio is a UK-made balanced mains supply with a 2.0kVA cryogenically treated transformer, in brushed silver, with one or two UK outputs and an optional RCBO and RF filter. -
Connected Fidelity
Connected Fidelity Six Star Mains Power Distribution BlockSKU: Connected Fidelity Six Star Mains Power Distribution
From£624.17Ex. VATThe Six Star Distribution Block uses star-wired mains distribution to deliver clean, consistent power to your audio or AV system. Available with optional wide-band RFI filtering, 13A/16A IEC inputs, and 6 UK or Schuko outputs. Reduces noise, hum, and impedance differences ideal for serious listening setups. -
From£570.00 £600.00Ex. VAT ✓ Save £30.00The IsoTek V5 Syncro Uni 10 eliminates DC interference from the mains, reducing transformer hum and vibration while enhancing sound clarity and dynamics. With a 60% increase in current capacity, it supports up to 16A peak current and features 6n OFC silver-plated wiring with FEP dielectric for optimal power delivery. Compatible with multiple power systems, it works as a standalone or pre-filter device, ensuring a cleaner, more stable power supply for audio, AV, and network components.
-
From£748.33 £787.50Ex. VAT ✓ Save £39.17The IsoTek V5 Syncro Uni 16 DC Blocker eliminates DC noise, rebalances the mains sine wave, and reduces transformer hum, enhancing sound quality and system performance. With increased current capability, advanced circuit design, and premium components, it lowers noise, improves dynamics, and extends equipment life. CALL TO ORDER.
-
£13,125.00Ex. VATThe Shunyata Research Everest-X redefines power delivery for studios and audiophiles. As the next generation of the Everest 8000, it provides clean, noise-free power using advanced patented technology. Expect deeper silence, sharper resolution, and lifelike dynamics that reveal every musical detail. Everest-X transforms the listening experience by unlocking the full potential of any high-end system.
-
AudioQuest
AudioQuest Niagara 1200 Noise-Dissipation System Mains Conditioner US Plug Special Offer - Black November DealSKU: NIAGARA1200US-1
£749.17 £915.83Ex. VAT ✓ Save £166.67Like the Niagaras 1000, 5000 and 7000, the Niagara 1200 uses capacitor forming technologies that vastly improve linearity and minimize distortion, ultra-low resistance solid-core wiring optimized for low-noise directionality, and low-impedance AC inlet and outlet contacts with heavy Hanging-Silver plating over high-purity Beryllium Copper for superior noise dissipation.
-
£4,162.50Ex. VATThe Delta-X seven-outlet power-distributor defines a new era of performance and value for mastering, recording and playback systems. Delta-X's ability to eliminate multiple forms of high-frequency noise while delivering maximum peak current to components make it an indispensable part of any system seeking the ultimate in performance.
-
AudioQuest
AudioQuest PowerQuest 505 Power Conditioner & Non-Sacrificial Surge ProtectorSKU: PowerQuest 505
From£582.50Ex. VATThe AudioQuest PowerQuest 505 is a high-performance power conditioner and non-sacrificial surge protector with 7 AC outlets, Ultra-Linear noise dissipation, Extreme Voltage Shutdown, and a detachable 2m PQ-715 power cable with ZERO-Tech and RF/ND-Tech noise reduction. -
£210.00Ex. VATThe Blustream PWR2IEC is a 2 port managed IEC PDU offering outlet-level metering and switching for AV and IT installations. A single C14 inlet feeds two C13 outlets rated to 10A, with control available over TCP/IP, RS-232, GPI or the front panel. A two-channel watchdog monitors connected devices and restarts them automatically, keeping systems running without a site visit.
-
£1,008.33Ex. VATThe Furutech Flux-C15 NCF is an in-line AC power filter with a slimline IEC connector, designed to fit where a conventional filter cannot: directly against slim-profile video equipment such as 4K and 8K televisions. It carries the same AC-1501R EMI filter as the Flux-50, cutting noise by 10dB at 1MHz and over 30dB at 10MHz, with NCF anti-static damping throughout. Rated 15A at 125V or 10A at 250V.
-
£464.16Ex. VATThe IsoTek V5 Syncro Uni 16 DC Blocker eliminates DC noise, rebalances the mains sine wave, and reduces transformer hum, enhancing sound quality and system performance. With increased current capability, advanced circuit design, and premium components, it lowers noise, improves dynamics, and extends equipment life.
-
£540.83Ex. VATThe ISOL-8 Axis 10 is a stand-alone inline DC blocker that removes DC offset from the mains supply before it reaches a hi-fi component, tackling one of the most common causes of transformer hum. Rated at 10A with an IEC C14 inlet and a single outlet, the Axis 10 is wired internally with silver plated PTFE wiring and is hand built in England.