Blocks & Conditioners

Distribution blocks, filtered conditioners and combined units in four to ten socket configurations, from Atlas, Chord, ISOL-8, IsoTek, PLiXiR, PS Audio, Shunyata and Synergistic Research.

134 products Award Winning Dealer Since 2013 Free expert consultation

Block or conditioner? The difference explained

A power block is a distribution point. It takes one feed from the wall and provides several sockets, using better internal wiring and connectors than a domestic extension lead, and it puts every component on a common earth reference. It does not filter.

A conditioner adds filtering, and sometimes surge protection, isolation transformers or full regeneration. The filtering removes high frequency mains noise, which typically lowers the noise floor and can improve stereo imaging. The trade off is that filtering in series with a power amplifier can restrict current on dynamic peaks and leave the system sounding flat.

The common arrangement solves both problems: filtered outlets for sources and digital equipment, and an unfiltered or high current outlet for the power amplifier. Many units are built exactly that way. Count the components you need to plug in, note which of them are amplifiers, and check the socket type your mains cables use. Tell us what the system is and we will recommend the configuration rather than the most expensive box.

4.95/5 from 20,731+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

132 of 134 products

  • ISOL-8 Axis 20 DC Blocker
    NEW

    ISOL-8

    ISOL-8 Axis 20 DC Blocker

    SKU: Axis 20

    £749.17
    Ex. VAT
    The ISOL-8 Axis 20 is the Reference stand-alone inline DC blocker in ISOL-8's Axis series, removing DC offset from the mains supply to tackle transformer hum in hi-fi components. Rated at 16A with a rhodium plated pure copper IEC C20 inlet and a single outlet, the Axis 20 is ISOL-8's audiophile-grade DC blocking solution, hand built in England.
    View Available Worldwide Shipping Available
  • ISOL-8 SubStation F3 Power Conditioner in Black
    NEW

    ISOL-8

    ISOL-8 SubStation F3 Mains Conditioner

    SKU: ISOL-8 SubStation F3 Mains Conditioner

    From
    £2,062.50
    Ex. VAT
    The ISOL-8 SubStation F3 is a full-size mains power conditioner built to give high-end hi-fi systems a cleaner, more stable supply. Six outlets, transmodal filtering, surge protection and pure copper internal conductors provide a quieter foundation for premium components, and an Axis version adds DC blocking for systems troubled by transformer hum. The SubStation F3 is designed and hand built in England.
    View Available Worldwide Shipping Available
  • ISOL-8 SubStation F3 Axis Mains Conditioner
    NEW

    ISOL-8

    ISOL-8 SubStation F3 Axis Mains Conditioner

    SKU: ISOL-8 SubStation F3 Axis Mains Conditioner

    From
    £2,395.83
    Ex. VAT
    The ISOL-8 SubStation F3 Axis is a full-size mains power conditioner with built-in DC blocking, combining ISOL-8's transmodal filtering with removal of DC offset from the mains supply. Six outlets, surge protection and pure copper internal conductors give premium components a cleaner, more stable supply, while the Axis DC blocking tackles the transformer hum that DC offset can cause. The SubStation F3 Axis is designed and hand built in England.
    View Available Worldwide Shipping Available
  • ISOL-8 SubStation F5 Power Conditioner in Black
    NEW

    ISOL-8

    ISOL-8 SubStation F5 Mains Conditioner

    SKU: ISOL-8 SubStation F5 Mains Conditioner

    From
    £3,329.17
    Ex. VAT
    The ISOL-8 SubStation F5 is a full-size mains power conditioner designed to give premium hi-fi components a cleaner, more stable supply with plenty of current in reserve. Seven outlets, transmodal filtering, surge protection and rhodium plated pure copper connectors set it above the SubStation F3. The SubStation F5 is designed and hand built in England, and is also available as the F5 Axis with built-in DC blocking.
    View Available Worldwide Shipping Available
  • ISOL-8 SubStation F5 Power Conditioner in Black
    NEW

    ISOL-8

    ISOL-8 SubStation F5 Axis Mains Conditioner

    SKU: ISOL-8 SubStation F5 Axis

    From
    £3,662.50
    Ex. VAT
    The ISOL-8 SubStation F5 Axis is a full-size mains power conditioner with built-in DC blocking, combining ISOL-8's transmodal filtering with removal of DC offset from the mains supply. Seven outlets, surge protection and rhodium plated pure copper connectors give premium components a cleaner, more stable supply, while the Axis DC blocking tackles the transformer hum that DC offset can cause. The SubStation F5 Axis is designed and hand built in England.
    View Available Worldwide Shipping Available
  • ISOL-8 Qube VHC Mains Conditioner
    NEW

    ISOL-8

    ISOL-8 Qube VHC Mains Conditioner

    SKU: ISOL-8 Qube VHC

    £6,662.50
    Ex. VAT

    The ISOL-8 Qube VHC is a reference mains conditioner for amplifiers, combining four conditioned outlets with built-in Axis DC blocking in a silver aluminium enclosure. Switchable DC blocking tackles transformer hum and lost power supply headroom, while a choice of IEC C14, IEC C20 or Neutrik powerCON inlet suits different installations. Designed and manufactured in England, the Qube VHC is covered by ISOL-8's lifetime warranty to the original owner.

    View Available Worldwide Shipping Available
  • Furutech Flow-8.1 NCF In-Line Power Filter
    NEW

    Furutech

    Furutech Flow-8.1 NCF In-Line Power Filter

    SKU: Flow-8.1 NCF

    £229.17
    Ex. VAT

    The Furutech Flow-8.1 NCF is an in-line AC power filter for components with a figure 8 (C7) mains inlet, such as CD players, streamers, DACs and network devices. It fits between your power cable and the component, filtering noise through Furutech's AC-1501(R) EMI filter (around 10dB at 1MHz and over 30dB at 10MHz), with Neo Damper and NCF vibration control and an FI-8.1N NCF(R) rhodium-plated figure 8 plug on a 60cm lead. Rated 10A at 250V.

    View Available Worldwide Shipping Available
  • Furutech FT-SWS-D NCF Box High End Performance Duplex Schuko Power Distributor - Rhodium
    NEW
    £618.33
    Ex. VAT

    The Furutech FT-SWS-D NCF Box is a freestanding duplex Schuko power distributor with two rhodium-plated NCF sockets, an FI-06 NCF IEC inlet and star-wired Alpha OCC wiring, built to feed two components with low noise.

    View Available Worldwide Shipping Available
  • Furutech e-TP60E NCF EU Schuko AC Power Distributor - Rhodium
    NEW

    Furutech

    Furutech e-TP60E NCF EU Schuko AC Power Distributor - Rhodium

    SKU: e-TP60 NCF

    £516.67
    Ex. VAT

    The Furutech e-TP60E NCF is a six-outlet Schuko power distributor with rhodium-plated FI-E30 NCF sockets, an FI-06 NCF(R) IEC inlet and Formula GC-303 EMI absorption, upgrading the standard e-TP60e's gold-plated parts.

    View Available Worldwide Shipping Available
  • Furutech NCF Power Vault-E EU Schuko AC Power Distributor
    NEW

    Furutech

    Furutech NCF Power Vault-E EU Schuko AC Power Distributor

    SKU: NCF Power Vault-E

    £7,604.17
    Ex. VAT

    The Furutech NCF Power Vault-E is an eight-socket Schuko mains distributor with a machined aluminium chassis, rhodium-plated FI-E30 NCF(R) sockets, Alpha-OCC wiring and GC-303 noise absorption. Furutech make no UK-socket version.

    View Available Worldwide Shipping Available
  • PLiXiR Elite BAC 150 Balanced Power Conditioner
    BLACK NOVEMBER

    Plixir

    PLiXiR Elite BAC 150 Balanced Power Conditioner - Special Offer - Black November Deal

    SKU: PLiXiR BAC 150 Special Offer

    £663.29 £829.17
    Ex. VAT ✓ Save £165.88

    Using a custom-built transformer from Noratel, the Elite BAC 150 by PLiXiR cleans up your AC mains supply for electrically sensitive equipment to help your setup achieve greater clarity of sound.

    View Out of Stock Worldwide Shipping Available
  • PLiXiR Elite BDC MK II Balanced Power Conditioner - Dual Output 5V/5A
    BLACK NOVEMBER

    Plixir

    PLiXiR Elite BDC MK II Balanced Power Conditioner - Dual Output 5V/5A - Special Offer - Black November Deal

    SKU: PLiXiR BDC MK II Dual 5V-5A Special Offer

    £663.29 £829.17
    Ex. VAT ✓ Save £165.88
    The PLiXiR Elite BDC MKII is a high-performance linear power supply featuring enhanced capacitance, a lower noise floor, and improved dynamics. With a simplified 1 or 2-output design, it’s optimized for sound purity and system synergy. Built in Singapore with premium parts and a rigid aluminum body, this power supply delivers exceptional audio clarity and stability.
    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

IsoTek power conditioners remove noise and interference from your mains supply while providing surge protection for your system. This ensures your hi-fi or AV equipment receives clean, stable power, improving dynamics, detail, and overall performance.

IsoTek uses advanced passive components and proprietary design techniques to filter out mains interference and isolate components from electrical “cross‑talk.” This results in a cleaner, more stable supply, reducing noise, tightening dynamics, and delivering greater clarity and musical detail.

PLiXiR uses balanced power technology to reduce common-mode noise and ground loop issues at the source. This results in a more natural sound, a quieter background, and improved dynamics compared to standard conditioners.

Yes. Larger models such as the Elite BAC 1500 and above are built to handle integrated and power amplifiers, ensuring stable current delivery without limiting dynamics or musical expression.

Unlike many conditioners that restrict current, Shunyata’s distributors deliver clean power without limiting dynamics. Technologies developed for the Venom, Hydra, Denali, and Everest ranges ensure lower noise floors, blacker backgrounds, and more natural sound, benefits that audiophiles and professionals alike can hear instantly.

Unlike traditional power conditioners that only filter noise, PS Audio mains regenerators rebuild the AC waveform entirely. This gives your system a supply of clean, consistent power, free from voltage dips or distortion, resulting in improved dynamics and detail.

The Stellar Power Plant 3 is ideal for smaller systems or dedicated front-end components such as DACs, preamps, and streamers. It provides the same clean regenerated power found in larger models but in a more compact and affordable form.

A power block is the simplest solution. It distributes mains power safely to multiple components, often with improved internal wiring and better mechanical stability than standard extension leads.

A power conditioner goes further by filtering electrical noise and interference present on the mains supply. This can lower the noise floor and help systems sound cleaner and more controlled, especially in electrically noisy homes.

A power regenerator actively rebuilds the incoming mains supply into a new, stable waveform before feeding your system. Regenerators are typically used in higher-resolution systems where maximum consistency, stability, and noise reduction are required.

This depends on the components being powered and the levels of noise within your local mains connections. There is equipment available to measure the noise in your mains, however, one of the easiest ways is to try a power conditioner for your source components and hear if there is any difference during your listening. If there is minimal to no difference, then a good quality power block may be your best option.

Loading...
Loading...
loader
Loading...