Power Cables
Mains leads in IEC C13, C15, C19 and Figure 8, with most available made to order in the length you need. Usually the first power upgrade people make.
Shop by Brand
Choosing a mains cable
Start with the connector. Your equipment takes one of four inlets. C13 is the standard kettle style socket, C15 is the notched high temperature version used by some amplifiers, C19 is the larger high current type on bigger power amplifiers, and Figure 8 is the small two pin fitting on lighter source components. The wrong one will not fit, so check the back of the unit before ordering.
Current capacity comes next. A power amplifier draws far more than a DAC or a streamer, and a cable designed for a source component can restrict a large amplifier on dynamic peaks. Where a manufacturer specifies a minimum, follow it.
On what to expect: changes here are usually described as a lower noise floor and better dynamic control rather than a shift in tonal balance, and they tend to be clearest on amplifiers and on digital sources with switching supplies. It is also the area of hi-fi where the gap between claim and result is widest, which is exactly why the 60-day money-back guarantee matters here. Put one on your amplifier and decide for yourself.
-
From£4,299.00Inc. VAT
The AudioQuest Dragon Source power cable are the peak of AudioQuest's design and construction, offering substantially more PSS than the FireBird for improved performance across the board. When connected to top of the range source components, the Dragon power cable shows its true worth, improving your system in a way previously thought impossible.
-
From£5,199.00Inc. VAT
The AudioQuest Dragon High-Current power cable are the peak of AudioQuest's design and construction, offering substantially more PSS than the FireBird for improved performance across the board. When connected to top of the range amplifiers or conditioners, the Dragon power cable shows its true worth, improving your system in a way previously thought impossible.
-
From£2,999.00Inc. VAT
The AudioQuest FireBird Source power cable is the first in AudioQuest's offering to introduce perfect-surface silver conductors. The combination of PSS and PSC+ offers huge leaps in performance improvements, while maintaining a lower price point with the PSC+ conductors. The introduction of PSS offers the lowest distortion out of the three types of conductors AudioQuest use, meaning your system will receive almost unaffected current supply for improved performance.
-
From£3,499.00Inc. VAT
The AudioQuest FireBird High-Current power cable is the first in AudioQuest's offering to introduce perfect-surface silver conductors. The combination of PSS and PSC+ offers huge leaps in performance improvements, while maintaining a lower price point with the PSC+ conductors. The introduction of PSS offers the lowest distortion out of the three types of conductors AudioQuest use, meaning your system will receive almost unaffected current supply for improved performance.
-
From£2,350.00Ex. VAT
The final piece in the puzzle for the Silver series of power cables. It has some of the “magic” of the Statement power cable because it came out of that same research and so is a smooth performer that brings your system to life. Which is relatively meaningless until you hear just what they can do for your system.
-
From£175.00 £207.50Inc. VAT ✓ Save £32.50
The Eos 1.5em Power Cable uses OFC conductors in a sophisticated fully screened configuration, implementing Atlas' ‘dd’ (dual drain) screening in an entry-level power cable for the first time.
-
£285.00Inc. VAT
The Furutech Flow-15 Plus Inline Power Filter effective removes all of that high-frequency noise from the mains power before it reaches your components—all without robbing your system of the high frequencies that are responsible for that airy, 3-D sound that’s so natural and lifelike. Dynamic contrasts, you’ll discover, are unaffected as well. Just stick the Flow-15 between power cords and components, or power cords and power distributors, and eliminate all radiated AC noise from your system.
-
£540.00Inc. VAT
The Furutech Flow-28 Inline Power Filter effective removes all of that high-frequency noise from the mains power before it reaches your components—all without robbing your system of the high frequencies that are responsible for that airy, 3-D sound that’s so natural and lifelike. Dynamic contrasts, you’ll discover, are unaffected as well. Just stick the Flow-28 between power cords and components, or power cords and power distributors, and eliminate all radiated AC noise from your system.
-
£189.00 £210.00Inc. VAT ✓ Save £21.00
The Flow-08 is a sophisticated finished inline power filtering unit that eliminates many common problems caused by contaminated electrical power lines. It protects against distortion caused by ground noise, voltage spikes and sags, high-frequency power supply noise from other components in your own system, and finally, high-frequency digital noise emanating from processors and digital interconnects.
-
Merlin Cables
Merlin Tarantula MK6 EU to Figure 8 Mains Cable - 1.5m Length (2018 Edition)SKU: Tarantula EU Fig 8 1.5m
£62.49 £70.82Ex. VAT ✓ Save £8.33All new Tarantula MK6 is a completely new mains cable. Constructed using 3 x 2.5 mm twisted high purity oxygen free copper conductors to low resistance and give greater current handing. Next Day Delivery. -
£315.83Ex. VAT
The Best of Two Worlds Power & Precision ECO MKII linear audio upgrade power supply (BOTW P&P ECO) is the successor of Sbooster's BOTW P&P ECO, which was introduced in the summer of 2015. The BOTW P&P ECO upgrade power supply combines power, precision and efficiency in a unique innovative manner and is the best choice for every audiophile.
-
From£208.33Ex. VAT
The EVO3 Sequel link cable has been specially constructed to link your EVO3 Titan power conditioner to another Titan, or as an upgrade for either the Solus, Aquarius, or Sigma's. By linking together these IsoTek units, you can further enhance the performance of your equipment.