Speaker Cables
The connection between your amplifier and speakers, and one of the most audible upgrades in a system. Every cable here can be cut to your exact length and terminated to order free of charge, with optional free burn-in before it ships.
Shop by Type
Shop by Brand
Choosing speaker cable for your system
Speaker cable carries the full amplified signal, so conductor quality, geometry and termination all affect what reaches the drivers. The differences are usually easiest to hear in bass control and stereo imaging, and they become clearer as the rest of the system improves.
Three decisions cover most purchases. Length should be equal for both runs even if the speakers sit at different distances from the amplifier. Configuration means single-wire, bi-wire or bi-amp, which depends on whether your speakers have one pair of binding posts or two. Termination means banana plugs, spades or bare wire, and the right answer is whatever your amplifier and speakers actually accept.
Most cables can be made to your exact length, either cut and terminated here or built to order by the manufacturer. You pay for the cable you need and nothing on top for making it up, though a small number are only available in fixed lengths and terminations. Burn-in on a Nordost Vidar is a free optional extra in 24 hour increments up to 96 hours. If you are not sure which cable suits your system, call or email us and we will tell you what we think.
-
From£583.33Ex. VATThe Entreq Primer Core Speaker Cable is a hand-made speaker cable built around Entreq's Energy Reference System (ERS) and Corepoint technology. Every cable is supplied with two Corepoint Signal units, one per channel, and is available with spade or banana plug terminations. It carries the signal from amplifier to speakers with matched coherence across both channels.
-
From£1,333.33Ex. VATThe Entreq Delphius Speaker Cable is a hand-made Swedish speaker cable built around Entreq's Energy Reference System (ERS) and Corepoint technology, supplied as a pair with two Corepoint Signal units, one per channel. Copper and silver conductors run in a cotton dielectric alongside a separately shielded silver ERS wire. It is available with spade or banana plug terminations in a standard 2.2m per channel length.
-
From£3,750.00Ex. VATThe Entreq Olympus Speaker Cable is a hand-crafted speaker cable built with Entreq's triple EEDS construction, supplied in a standard 2.2m length. Like all Olympus cables it requires an accompanying Entreq ground box, and because speaker cables carry more current and generate more magnetism, Entreq recommend a higher performance box than for signal cables.
-
£150.00Ex. VAT
-
£1.25Inc. VATKordz ONE Series Speaker Cable is engineered to flow without snags, twisting or curling for high-quality audio performance and connection longevity in AV installations, and its robust materials feature an easy-glide outer jacket with low smoke and zero halogen emission construction.
-
£7.50Ex. VATQED Performance Speaker Cable connects amplifier to loudspeaker through large 2.5mm² conductors of 99.999% oxygen-free copper, giving a low loop resistance of 0.017Ω/m. QED's X-Tube Plus Technology keeps the current more evenly spread from bass to treble, and factory-fitted Airloc banana plugs are cold-welded for a lasting, oxidation-free connection. Pre-terminated in 2m, 3m and 5m lengths.
-
From£3,541.25Ex. VAT
The AudioQuest Athena Speaker Cable is a full-range, ZERO-Tech speaker cable from AudioQuest's Folk Hero range, built with solid No-Grain Copper conductors and a 72v Dielectric-Bias System. Athena brings the jet-black backgrounds and top-to-bottom coherence of AudioQuest's finest designs to a flexible, manageable cable. Sold individually from 1.5m to 4m with silver-plated banana or multi-spade plugs.
-
From£4,166.25Ex. VAT
The AudioQuest ThunderBird XTRM is a full-range speaker cable and the entry point to AudioQuest's Mythical Creature series. Solid 10AWG No-Grain Copper and Perfect-Surface Copper+ conductors in ZERO-Tech geometry, a 72v Dielectric-Bias System and Graphene+Carbon noise dissipation combine to deliver clean, dynamic and unforced sound. ThunderBird XTRM is sold individually from 1.5m to 4m, terminated with cold-welded silver bananas or U-spades.
-
AudioQuest
AudioQuest Dragon XTRM and BassZilla BiWire Combo Speaker CableSKU: AudioQuest Dragon XTRM and BassZilla BiWire Combo Speaker Cable
From£12,770.42Ex. VATThe AudioQuest Dragon XTRM and BassZilla BiWire Combo is a flagship bi-wire speaker cable for loudspeakers with separate bass and treble terminals. A Dragon XTRM ZERO-Tech cable feeds the treble while a BassZilla Bass-Only cable with RF/ND-Tech feeds the bass, the two joined at the amplifier end. Each comes with silver banana or U-spade plugs, from 1.5m to 4m.
-
From£3,666.25Ex. VAT
The AudioQuest BassZilla is a bass-only speaker cable for the bass and midrange inputs of a bi-wirable or tri-wirable loudspeaker, designed to run alongside ThunderBird XTRM or Dragon XTRM on the treble input. Solid 10AWG Perfect-Surface Copper+, ZERO-Tech geometry, RF/ND-Tech and a 72v Dielectric-Bias System lower RF noise, so the amplifier and the treble cable can perform at their best.
-
From£9,103.75Ex. VAT
The AudioQuest Dragon XTRM Speaker Cable is AudioQuest's flagship full-range speaker cable, built around ZERO-Tech geometry and solid 10AWG No-Grain Copper conductors. A 72v Dielectric-Bias System, Graphene+Carbon Mesh-Network and No-Grain Silver RF drains work together to keep noise away from the signal. Dragon XTRM is sold individually with silver banana or silver Multi-Spade plugs, and can also form the treble half of a bi-wire set with BassZilla.
-
From£7,832.92Ex. VAT
The AudioQuest ThunderBird XTRM and BassZilla BiWire Combo is a biwire speaker cable pairing a ThunderBird XTRM ZERO-Tech cable for the treble inputs with a BassZilla Bass-Only cable for the bass inputs, joined at the amplifier end. Solid PSC+ and No-Grain Copper conductors, a 72v Dielectric-Bias System and RF/ND-Tech noise dissipation combine for a clearer treble, sharper focus and a bigger soundstage.