Speaker Cables
The connection between your amplifier and speakers, and one of the most audible upgrades in a system. Every cable here can be cut to your exact length and terminated to order free of charge, with optional free burn-in before it ships.
Shop by Type
Shop by Brand
Choosing speaker cable for your system
Speaker cable carries the full amplified signal, so conductor quality, geometry and termination all affect what reaches the drivers. The differences are usually easiest to hear in bass control and stereo imaging, and they become clearer as the rest of the system improves.
Three decisions cover most purchases. Length should be equal for both runs even if the speakers sit at different distances from the amplifier. Configuration means single-wire, bi-wire or bi-amp, which depends on whether your speakers have one pair of binding posts or two. Termination means banana plugs, spades or bare wire, and the right answer is whatever your amplifier and speakers actually accept.
Most cables can be made to your exact length, either cut and terminated here or built to order by the manufacturer. You pay for the cable you need and nothing on top for making it up, though a small number are only available in fixed lengths and terminations. Burn-in on a Nordost Vidar is a free optional extra in 24 hour increments up to 96 hours. If you are not sure which cable suits your system, call or email us and we will tell you what we think.
-
AudioQuest
AudioQuest Robin Hood Zero + Bass Speaker Cable 2.5m Spade to Banana - Ex DemoSKU: Robin Hood Zero Ex Demo
£990.83 £1,407.50Ex. VAT ✓ Save £416.67Please note, this product is for a MONO 2.5m Robin Hood Zero plus a Robin Hood Bass, originally used as a demo for a centre speaker.
Closely related to AudioQuest's groundbreaking Mythical Creature Series, the Folk Hero Series, comprising two models—Robin Hood and William Tell—are available with either Solid Perfect-Surface Copper+ or Solid Perfect-Surface Silver conductors. While the Mythical Creatures are all-out assaults on the state of the cable art, the Folk Heroes use all of the same technology with fewer conductors.
-
Atlas Cables
Atlas Hyper Achromatic Bi-Wire Speaker Cable - 2 x Z-Plug to 4 x Spade Plug 2m Pair (Special Offer) - Black November DealSKU: Hyper Achromatic Bi-Wire 2B-4S 2m
£311.62 £444.58Ex. VAT ✓ Save £132.96This cable is terminated with 2 x Atlas Z-Plugs on the amp end, and 4 x Atlas Spade Plugs on the speaker end.
The bi-wire variation of Atlas' Hyper cable family. Bi-wire cables can offer performance benefits when the two halves of the loudspeaker's crossover are electrically ‘separated’ to allow bi-wiring) (and bi-amping, if so desired). Available in 2–4 and 4–4 connector configurations.
-
Atlas Cables
Atlas Hyper Achromatic Bi-Wire Speaker Cable - 4 x Z-Plug to 4 x Z-Plug 2m Pair (Special Offer) - Black November DealSKU: Hyper Achromatic Bi-Wire 4B-4B 2m
£349.96 £500.00Ex. VAT ✓ Save £150.04This cable is terminated with 4 x Atlas Z-Plugs on the amp end, and 4 x Atlas Z-Plugs on the speaker end.
The bi-wire variation of Atlas' Hyper cable family. Bi-wire cables can offer performance benefits when the two halves of the loudspeaker's crossover are electrically ‘separated’ to allow bi-wiring) (and bi-amping, if so desired). Available in 2–4 and 4–4 connector configurations.
-
Atlas Cables
Atlas Hyper Achromatic Bi-Wire Speaker Cable - 2 x Z-Plug to 4 x Z-Plug 2.5m Pair (Special Offer) - Black November DealSKU: Hyper Achromatic Bi-Wire 2B-4B 2.5m
£330.79 £472.30Ex. VAT ✓ Save £141.51This cable is terminated with 2 x Atlas Z-Plugs on the amp end, and 4 x Atlas Z-Plugs on the speaker end.
The bi-wire variation of Atlas' Hyper cable family. Bi-wire cables can offer performance benefits when the two halves of the loudspeaker's crossover are electrically ‘separated’ to allow bi-wiring) (and bi-amping, if so desired). Available in 2–4 and 4–4 connector configurations.
-
Atlas Cables
Atlas Hyper Achromatic Bi-Wire Speaker Cable - 2 x Z-Plug to 4 x Z-Plug 3m Pair (Special Offer)SKU: Hyper Achromatic Bi-Wire 2B-4B 3m
£349.96 £500.00Ex. VAT ✓ Save £150.04This cable is terminated with 2 x Atlas Z-Plugs on the amp end, and 4 x Atlas Z-Plugs on the speaker end.
The bi-wire variation of Atlas' Hyper cable family. Bi-wire cables can offer performance benefits when the two halves of the loudspeaker's crossover are electrically ‘separated’ to allow bi-wiring) (and bi-amping, if so desired). Available in 2–4 and 4–4 connector configurations.
-
AudioQuest
AudioQuest ThunderBird Zero Speaker Cable - Banana to Banana 3m Pair Ex-DemoSKU: ThunderBird Zero BB 3m Ex-Demo
£3,666.67 £4,833.33Ex. VAT ✓ Save £1,166.67With the introduction of the Mythical Creatures series of speaker cables, AudioQuest has pushed significantly beyond even its own very high standards. By eliminating the Mythical Creatures speaker cable’s characteristic impedance, current compression and distortion of the signal (current) transient is significantly reduced. The result is dynamic contrast, transient response, and bass slam that are rendered seemingly without effort. -
Shunyata
Shunyata Research Venom-X Speaker Cable 2.5m Spade to Spade Pair Ex-DemoSKU: Venom-X Speaker 2.5m Ex-Demo
£1,370.83 £1,787.50Ex. VAT ✓ Save £416.67The new Venom-X range from Shunyata Research has been created by Caelin Gabriel to bring unmatched value at its price point. These speaker cables feature massive 8-gauge hollow conductors but are still remarkable flexible. The STIS v3 connectors are modular, meaning that you can switch between spades and bananas or replace damaged connectors with ease.
-
Gold Note
Gold Note Siena Speaker Cables Banana to Banana Pair 2.5 m - Black November DealSKU: PF-CABLE-SIE-1
£233.32 £291.67Ex. VAT ✓ Save £58.34The Gold Note Siena Speaker Cables feature 8 pure OFC copper conductors with Teflon insulation, sealed in Elastollan® oil-filled tubes. With 45 pF/mt capacitance and gold-plated Banana or Spade plugs, they deliver distortion-free sound and exceptional tonal balance. Manufactured in Italy, these cables enhance any system with detailed, natural audio and sleek design. Perfect for audiophiles, the Siena cables embody Gold Note’s dedication to superior performance and craftsmanship. -
Gold Note
Gold Note Siena Plus Speaker Cables Pair 2.5m Banana to Banana - Black November DealSKU: PF-CABLE-SIE-P-1
£591.66 £741.67Ex. VAT ✓ Save £150.01The Gold Note Siena Plus Speaker Cables feature 4 solid-core OFC copper conductors in Teflon insulation for precise, neutral sound. Encased in Elastollan® oil-filled tubes, they ensure perfect damping and impedance. With 35 pF/mt capacitance and gold-plated Banana or custom Spade connectors, these factory-terminated cables deliver clean, distortion-free audio. Manufactured in Italy, the Siena Plus embodies Gold Note’s dedication to premium performance and refined design, making it ideal for any audiophile setup. -
£108.32 £133.75Ex. VAT ✓ Save £25.43The excellent sound quality and low signal loss of 2 Flat make it ideal for both hifi and home theater applications, where long runs for surround channel speakers are required to be discrete, yet offer high performance.
-
£25.00Ex. VATThe Merlin Tarantula Jumper Lead combines 99.99% OFC copper conductors, XLPE insulation, and cotton damping in a slim 8.8mm jacket – delivering a flexible, high-performance solution at a competitive price. Available with Elite Reference cold-weld plugs for maximum connectivity and reliability.
-
Chord Company
Chord Epic X Speaker Cable - 1m Pair - ChordOhmic Banana to ChordOhmic Spade Ex-DemoSKU: Epic X - 1m ExDemo BS
£174.17 £218.33Ex. VAT ✓ Save £44.17EpicX has been part of Chord's speaker cable range for many years – it’s a shielded cable that works with pretty much every style of speaker. From mid-price to high end, EpicX brings detail, dynamics, resolution and coherence to every speaker it’s used with. It’s particularly good at bringing control and definition across the bass frequencies and is the ideal cable solution for floor-standing speakers.