Speaker Cables
The connection between your amplifier and speakers, and one of the most audible upgrades in a system. Every cable here can be cut to your exact length and terminated to order free of charge, with optional free burn-in before it ships.
Shop by Type
Shop by Brand
Choosing speaker cable for your system
Speaker cable carries the full amplified signal, so conductor quality, geometry and termination all affect what reaches the drivers. The differences are usually easiest to hear in bass control and stereo imaging, and they become clearer as the rest of the system improves.
Three decisions cover most purchases. Length should be equal for both runs even if the speakers sit at different distances from the amplifier. Configuration means single-wire, bi-wire or bi-amp, which depends on whether your speakers have one pair of binding posts or two. Termination means banana plugs, spades or bare wire, and the right answer is whatever your amplifier and speakers actually accept.
Most cables can be made to your exact length, either cut and terminated here or built to order by the manufacturer. You pay for the cable you need and nothing on top for making it up, though a small number are only available in fixed lengths and terminations. Burn-in on a Nordost Vidar is a free optional extra in 24 hour increments up to 96 hours. If you are not sure which cable suits your system, call or email us and we will tell you what we think.
-
£17.38Ex. VAT
The Furutech FS-502 is a shielded two-core speaker cable with 14 AWG α (Alpha) treated μ-OFC conductors, made to order by Future Shop from 1m to 30m with Furutech plugs or bare wire.
-
£28.42Ex. VAT
Furutech μ-4.1T bi-wire speaker cable with Alpha-treated 13 AWG μ-OFC conductor pairs for treble and bass, made to your length by Future Shop. Order a quantity of 2 for a pair.
-
£100.00Ex. VAT
A pair of Furutech FP-803 speaker binding posts with rhodium-plated Alpha phosphor bronze conductors and matt black copper alloy housings, for solder or set-screw connection of cables up to 4.5mm.
-
£51.42Ex. VAT
Furutech FS-15S shielded speaker cable with a solid 15 AWG Alpha μ-OFC conductor and fluoropolymer insulation, made to your length by Future Shop. Order a quantity of 2 for a pair.
-
£25.72Ex. VAT
The Furutech μ-2T is a heavy-gauge two-core speaker cable with 13 AWG α (Alpha) treated μ-OFC conductors, made to order by Future Shop from 1m to 30m with Furutech plugs or bare wire.
-
£151.67Ex. VAT
A pair of Furutech FT-809 Torque Guard speaker binding posts, with a ratcheting nut that prevents over-tightening and 24k gold-plated Alpha pure copper conductors, for solder or crimp connection of cables up to 4.5mm.
-
£118.29Ex. VAT
Furutech Alpha-S25 speaker cable with stranded Alpha-OCC conductors in an ultra-flexible 14.5mm jacket, made to your length by Future Shop. Order a quantity of 2 for a pair.
-
£151.67Ex. VAT
A pair of Furutech FT-809 Torque Guard speaker binding posts, with a ratcheting nut that prevents over-tightening and rhodium-plated Alpha pure copper conductors, for solder or crimp connection of cables up to 4.5mm.
-
QED
QED Supremus Zr Speaker Cable - Factory Terminated Pair - Special Offer - Black November DealSKU: Supremus Zr Special Offer
From£1,166.62 £1,458.33Ex. VAT ✓ Save £291.71The QED Supremus Zr Speaker Cable, with its zirconia plugs and barrels, rhodium-plated locking design, and Airloc™ cold weld system, represents the pinnacle of audio innovation, ensuring minimal plug-induced distortion and maximum connection integrity. Utilising AircoreTM cordage technology, ultra-low resistance conductors, and cryogenic treatment, this cable delivers consistent performance, bringing the amplifier closer to the loudspeaker for better control and accurate reproduction of the original music signal.
-
Wireworld
Wireworld Eclipse 10 Speaker Cable - Spade to Spade 3m Pair - Special Offer - Black November DealSKU: Eclipse 10 Spade-Spade 3m Special Offer
£1,653.29 £2,066.67Ex. VAT ✓ Save £413.38Wireworld Eclipse 10 speaker cables deliver high-end audio performance using OCC-7N copper and the patented Octo DNA HELIX® design. With flat conductors for optimal signal clarity and optional spade or banana plugs, these cables provide outstanding sound quality for serious audiophiles. -
From£4,407.92Ex. VAT
The AudioQuest Athena and BigFoot BiWire Combo Speaker Cable pairs an Athena ZERO-Tech cable for the treble inputs with a BigFoot Bass-Only cable for the bass inputs, joined at the amplifier end. Solid No-Grain Copper and Perfect-Surface Copper+ conductors, a 72v Dielectric-Bias System and BigFoot's RF/ND-Tech noise dissipation bring the benefits of biwiring to the Folk Hero range. Sold individually from 1.5m to 4m with banana or multi-spade plugs.
-
From£1,891.67Ex. VAT
The AudioQuest Lone Ranger and BigFoot BiWire Combo Speaker Cable pairs a Lone Ranger ZERO-Tech cable for the treble inputs with a BigFoot Bass-Only cable for the bass inputs, joined at the amplifier end. Solid Perfect-Surface Copper+ conductors, a 72v Dielectric-Bias System and BigFoot's RF/ND-Tech noise dissipation bring the benefits of biwiring to the Folk Hero range. Sold individually from 1.5m to 4m with banana or multi-spade plugs.