Speaker Cables

The connection between your amplifier and speakers, and one of the most audible upgrades in a system. Every cable here can be cut to your exact length and terminated to order free of charge, with optional free burn-in before it ships.

422 products Award Winning Dealer Since 2013 Free expert consultation

Choosing speaker cable for your system

Speaker cable carries the full amplified signal, so conductor quality, geometry and termination all affect what reaches the drivers. The differences are usually easiest to hear in bass control and stereo imaging, and they become clearer as the rest of the system improves.

Three decisions cover most purchases. Length should be equal for both runs even if the speakers sit at different distances from the amplifier. Configuration means single-wire, bi-wire or bi-amp, which depends on whether your speakers have one pair of binding posts or two. Termination means banana plugs, spades or bare wire, and the right answer is whatever your amplifier and speakers actually accept.

Most cables can be made to your exact length, either cut and terminated here or built to order by the manufacturer. You pay for the cable you need and nothing on top for making it up, though a small number are only available in fixed lengths and terminations. Burn-in on a Nordost Vidar is a free optional extra in 24 hour increments up to 96 hours. If you are not sure which cable suits your system, call or email us and we will tell you what we think.

4.95/5 from 20,728+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

420 of 422 products

  • AudioQuest Athena and BigFoot BiWire Combo Speaker Cable
    NEW

    AudioQuest

    AudioQuest Athena and BigFoot BiWire Combo Speaker Cable

    SKU: ATHBFCOMBO

    From
    £4,407.92
    Ex. VAT

    The AudioQuest Athena and BigFoot BiWire Combo Speaker Cable pairs an Athena ZERO-Tech cable for the treble inputs with a BigFoot Bass-Only cable for the bass inputs, joined at the amplifier end. Solid No-Grain Copper and Perfect-Surface Copper+ conductors, a 72v Dielectric-Bias System and BigFoot's RF/ND-Tech noise dissipation bring the benefits of biwiring to the Folk Hero range. Sold individually from 1.5m to 4m with banana or multi-spade plugs.

    View Available Worldwide Shipping Available
  • AudioQuest Lone Ranger and BigFoot BiWire Combo Speaker Cable
    NEW

    AudioQuest

    AudioQuest Lone Ranger and BigFoot BiWire Combo Speaker Cable

    SKU: LRBFCOMBO

    From
    £1,891.67
    Ex. VAT

    The AudioQuest Lone Ranger and BigFoot BiWire Combo Speaker Cable pairs a Lone Ranger ZERO-Tech cable for the treble inputs with a BigFoot Bass-Only cable for the bass inputs, joined at the amplifier end. Solid Perfect-Surface Copper+ conductors, a 72v Dielectric-Bias System and BigFoot's RF/ND-Tech noise dissipation bring the benefits of biwiring to the Folk Hero range. Sold individually from 1.5m to 4m with banana or multi-spade plugs.

    View Available Worldwide Shipping Available
  • AudioQuest Bare Naked BiWire Jumpers (Set of 4), four bare silver-plated jumpers
    NEW

    AudioQuest

    AudioQuest Bare Naked BiWire Jumpers (Set of 4)

    SKU: BWJUMPERSBOX

    £37.46
    Ex. VAT

    A set of four AudioQuest bi-wire jumpers made from solid, silver-plated PSC+ copper with no insulation or plugs, replacing the stamped plates supplied with most bi-wirable loudspeakers.

    View Available Worldwide Shipping Available
  • AudioQuest SureGrip 300 BFA/Banana Silver Plated Plugs - Pack of 4 Ex Demo
    NEW

    AudioQuest

    AudioQuest SureGrip 300 BFA/Banana Silver Plated Plugs - Pack of 4 Ex Demo

    SKU: BAN3004S Ex Demo

    £36.63 £45.79
    Ex. VAT ✓ Save £9.16
    These AudioQuest plugs can be used to terminate your speaker cable with ease and do not require the use of any special tools.
    View Available Worldwide Shipping Available
  • AudioQuest SureGrip 100 Multi-Spade Gold speaker plugs, pack of 8
    NEW

    AudioQuest

    AudioQuest SureGrip100 Multi-Spade (Gold) - Pack of 8

    SKU: SGSPADE1008G

    £49.96
    Ex. VAT

    A set of eight AudioQuest SureGrip 100 Multi-Spade speaker plugs, Direct-Gold over Purple Copper, for cables up to 6.63mm² and fitted by cold-weld with the Allen tool supplied.

    View Available Worldwide Shipping Available
  • AudioQuest SureGrip 100 Multi-Spade Silver speaker plugs, pack of 8
    NEW

    AudioQuest

    AudioQuest SureGrip100 Multi-Spade (Silver) - Pack of 8

    SKU: SGSPADE1008S

    £49.96
    Ex. VAT

    A set of eight AudioQuest SureGrip 100 Multi-Spade speaker plugs, Direct-Silver over Purple Copper, for cables up to 6.63mm² and fitted by cold-weld with the Allen tool supplied.

    View Available Worldwide Shipping Available
  • AudioQuest Crimp BFA/Banana Plugs (Silver) - Set of 4, one plug shown with crimp sleeve and red and black boots
    NEW

    AudioQuest

    AudioQuest Crimp BFA/Banana Plugs (Silver) - Set of 4

    SKU: BFA-CR-S

    £29.17
    Ex. VAT

    A set of four AudioQuest Crimp BFA/Banana speaker plugs, Direct-Silver Plated, for cable conductors up to 6.63mm² (9AWG), crimped rather than soldered and supplied with red and black boots.

    View Available Worldwide Shipping Available
  • Atlas Ailsa Achromatic OCC Links (Bi Wire Jumpers)
    NEW

    Atlas Cables

    Atlas Ailsa Achromatic OCC Links (Bi Wire Jumpers)

    SKU: Ailsa Achromatic OCC Links

    From
    £500.00
    Inc. VAT

    The Atlas Ailsa Achromatic OCC Links are a set of four OCC copper bi-wire jumpers that replace the (typically brass) links supplied with bi-wirable speakers, terminated with Atlas Achromatic Z-plugs, spades or one of each.

    View Available Free delivery
  • Atlas Element R1 Speaker Cable - Factory Terminated
    NEW

    Atlas Cables

    Atlas Element R1 Speaker Cable - Factory Terminated

    SKU: Element Speaker R1 Factory

    From
    £91.67
    Ex. VAT

    The Atlas Element R1 is a twin-core speaker cable with 3.2mm² OFC conductors, an XLPE dielectric and cold-welded Achromatic Z-plug or spade terminations, made in Scotland in lengths from 2m to 10m.

    View Available Worldwide Shipping Available
  • Atlas Element R1 Screened Speaker Cable - Factory Terminated
    NEW

    Atlas Cables

    Atlas Element R1 Screened Speaker Cable - Factory Terminated

    SKU: Element Speaker Screened R1 Factory

    From
    £102.08
    Ex. VAT

    The Atlas Element R1 Screened is a twin-core speaker cable with 2.5mm² OFC conductors, an XLPE dielectric and Atlas's dual-drain RFI screen, cold-weld terminated in Scotland with Z-plugs or spades.

    View Available Worldwide Shipping Available
  • Atlas Element R1 Bi-wire Speaker Cable - Factory Terminated
    NEW

    Atlas Cables

    Atlas Element R1 Bi-wire Speaker Cable - Factory Terminated

    SKU: Element Speaker Bi-wire R1 Factory

    From
    £171.87
    Ex. VAT

    The Atlas Element R1 Bi-wire is a four-conductor OFC speaker cable with 1.6mm² conductors and an XLPE dielectric, in 2-4 or 4-4 form with cold-welded Achromatic Z-plugs or spades, made in Scotland.

    View Available Worldwide Shipping Available
  • Kordz

    Kordz ONE Outdoor 14/2 Speaker Cable - Custom Length

    SKU: Kordz ONE Outdoor Speaker Cable 14/2

    (2 reviews)
    £2.08
    Ex. VAT
    Kordz ONE Series Speaker Cable is engineered to flow without snags, twisting or curling for high-quality audio performance and connection longevity in AV installations, and its robust materials feature an easy-glide outer jacket with low smoke and zero halogen emission construction.
    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

Start by considering your amplifier and speakers. For short runs or compact systems, basic oxygen-free copper cables may suffice. But if you're after tighter bass, better detail or a wider soundstage, an upgrade to a higher-quality cable, like those from Chord Company, AudioQuest or Atlas, can make a noticeable difference. For personalised recommendations, speak to our consultants here.

Yes. Bi-wire cables separate the signal paths for high and low frequencies, which can improve control and reduce interference in compatible speakers. Single-wire cables are suitable for most systems, but bi-wire setups can offer sonic gains if your speakers and amp support them. Alternatively, you can use single-wire cables with matching jumper cables on bi-wirable speakers.

Higher-end cables often use better conductors, insulation materials, and terminations, which can reduce signal loss and interference. Whether it's worth the investment depends on your system's resolution and your listening environment. Our team can help you choose based on your priorities.

Yes, cable length can influence performance. Longer runs can introduce resistance and signal loss, especially with thinner cables. Where possible, try to keep left and right channel lengths similar, and choose an appropriate gauge for the distance.

Jumper cables replace the metal links between binding posts on bi-wireable speakers. Stock jumpers can limit performance, while high-quality alternatives preserve signal integrity and improve coherence across frequencies. When replacing your manufacturer supplied links, we recommend to use jumper cables of equal or better quality than your speaker cable.

All cables matter, and your system will require good quality cables for all of it's connections, however, if you were looking for the cable which will make the biggest difference, then we would recommend looking at the power cables from your wall socket, to your distribution block and/or amplifier. More often than not, we hear from customers, manufacturers, and our own tests that higher quality power cables can have a significant impact of the quality of your system.

This entirely depends on your current system and your expectations. You could have a decent pair of speakers which are not matched correctly with your amplifier, or vice versa. Similarly, you may want a new source of media to listen to. There are also options to upgrade other aspects of your system, such as the power, isolation or cabling to get the most out of your system before upgrading the traditional components. The best way to find out your own upgrade path is to contact our consultants and we would be happy to help you.

In short, yes, although, this depends on the quality of the cable and your speakers/amplifier. High quality speaker cables tend to be manufactured with 4 key areas, their conductor, dielectric, shielding and geometry. Each of these areas can optimise signal retention from your amplifier to your speakers. Cheaper speaker cables can use lower quality conductors (tin-plated copper or even steel-clad copper), with basic dielectrics (PVC), no shielding and minimal strands with no geometry. More expensive speaker cables start to introduce higher quality conductors (Oxygen-free Copper, Ohno Continuous Cast Copper, Silver-plated Copper or even Pure Silver), better dielectrics (XLPE, PTFE, Teflon etc.), different amounts of shielding (foil, ofc-braid, carbon etc) and various geometries (solid-core, different twists, higher gauges etc.). There are diminishing returns to consider between your speaker cable and your system, as well as the potential of bottle-necks in your system if you use a lower quality cable. All of these factors help to maintain signal integrity, reduce loss, and ensure that your amplifier and speaker are performing as intended.

Loading...
Loading...
loader
Loading...