Atlas Cables
Built to order in Kilmarnock, so a 2.7 metre run with one end changed is routine rather than a special request. Pure copper throughout, which tends to settle a bright system rather than sharpen it
About Atlas Cables
Quick Access
What Atlas do differently, and why it matters that they build it themselves
Most cable brands design in one country and manufacture in another. Atlas do both in Kilmarnock, and that single fact explains a lot about how they operate. Custom lengths are ordinary rather than special orders. Termination changes are a production decision rather than a negotiation with a supplier. If a cable needs to be 2.7 metres with one end changed, that is a normal Tuesday.
Two engineering positions run through the range. The first is OCC copper, drawn as a continuous cast so the conductor has far fewer grain boundaries than standard copper. Fewer boundaries means fewer points where the signal meets a discontinuity.
The second follows from the first. OCC does not take kindly to post-processing at high temperature, so soldering was ruled out from the start. Atlas cold-weld the connector instead, joining it under pressure so the two metals bond directly, with no third metal of different conductivity sitting in the signal path. That decision also meant designing and making their own plugs, since nothing off the shelf was built for it.
Neither position is unique to Atlas, but doing both, in-house, at prices that start well below high-end territory is unusual. It is why the entry ranges hold up better than their price suggests.
Shop by Range
Atlas run one ladder for their signal cables, from Element at the entry point up to the Asimi silver range. The biggest single step is Hyper to Mavros, where OCC copper runs throughout. Eos and Zeno sit outside the ladder and cover mains and headphone cables. Most Atlas cables can be built to a custom length.
-
Atlas Cables
Atlas Zeno 1:2 Custom Headphone Cable - 3.5mm to Lemo 2 Pin - 1.5m Ex DemoSKU: Zeno - 3.5mm to Lemo - 1.5m
£244.17 £424.37Ex. VAT ✓ Save £180.21Atlas Zeno headphone cables are designed to offer a significant upgrade over the cables bundled with even very expensive headphones. Brands typically using 1:2 (cable plugs into both earpieces) connectors include Audeze, HiFiMan, Oppo, Sennheiser, Ultrasone, HiFiMan & Mr Speakers (Some brands may use more than one type of connection depending on model).
-
From£270.83Ex. VATThe Atlas Hyper R1 is a high-purity RCA interconnect cable featuring OCC copper conductors, PEF dielectric insulation, and Achromatic X cold-weld RCA connectors for transparent, wide-bandwidth audio performance.
-
From£629.17Ex. VATThe Atlas Hyper Duo R1 is a twin-balanced RCA interconnect featuring independently screened OCC copper conductors, PEF dielectric insulation, and Ultra Latik 3D-printed low-mass connectors for superior RFI rejection and transparent audio performance.
-
From£629.17Ex. VATThe Atlas Hyper Duo XLR is a balanced interconnect featuring OCC copper conductors, PEF dielectric insulation, and an independent Duo dual-drain screen topology for wide bandwidth, low noise-floor performance across longer cable runs.
-
From£1,408.33Ex. VATThe Atlas Ailsa Duo XLR is a solid-core balanced interconnect featuring OCC copper conductors, PEF dielectric insulation, and an independent Duo dual-drain screen topology for precise, low-noise performance in high-end XLR-equipped systems.
-
From£1,014.58Ex. VAT
The Atlas Ailsa R1 Speaker Cable pairs twin 3.0mm² OCC copper conductors with a microporous PTFE dielectric and cold-welded Z-plug or spade terminations, for full, controlled bass and clean, low-loss detail.
-
Atlas Cables
Atlas Equator Achromatic X 1 RCA to 1 RCA Subwoofer Cable 1.5m - Black November DealSKU: Atlas Equator Achromatic X 1 RCA to 1 RCA Subwoofer Cable 1.5m
£102.95 £129.25Inc. VAT ✓ Save £26.30The Equator Achromatic X Sub delivers accurate low-frequency performance free from RF and EM interference. Featuring shielded OCC copper, foamed PEF dielectric, and cold-weld Achromatic X RCA connectors, it ensures clear, noise-free bass for audio and home cinema setups. Ideal for runs up to 7m, available in 1:1 and 1:2 configurations. -
Atlas Cables
Atlas Element 2 RCA to 2 XLR Analogue Audio Cable Pair - 2m Special Offer - Black November DealSKU: Element 2R2X 2m
£184.95 £263.00Inc. VAT ✓ Save £78.05 -
Atlas Cables
Atlas EOS DD UK Mains Power Cable - C13 10A 1.5m Length - Special OfferSKU: EOS DD UK - C13 10A 1.5m
£149.95 £212.85Inc. VAT ✓ Save £62.90The Eos dd utilises Atlas' high purity, low resistance, oxygen free copper (OFC) conductors,contained in a highly-stabilised PVC dielectric. The dd (dual drain) conductors and the power conductors, are then enclosed by anti-vibration layer and an innovative hybrid carbon-loaded polymer screen. The assembly is then wrapped in a royal blue PVC sleeve.
-
Atlas Cables
Atlas Equator 2.0 Speaker Cable - 2m Pair - Banana to Banana Ex DemoSKU: Equator 2.0 2m BB Ex Demo
£110.82 £139.17Ex. VAT ✓ Save £28.34Elevate your mid-level or older audio system with the Atlas Equator 2.0 Speaker Cable. Featuring 2mm² Oxygen-Free Copper conductors and high-density PEF dielectric, this cable ensures crisp and dynamic sound without exaggerated treble. Its cotton yarn wrapping minimises microphony, and its pearl white finish adds a touch of elegance. -
Atlas Cables
Atlas Element 2.0 Speaker Cable - 3m Banana to Banana Ex-DemoSKU: Atlas Element 2.0 3m Ex-Demo
£41.66 £52.92Ex. VAT ✓ Save £11.26The Atlas Element 2.0 speaker cable is the ideal first upgrade for any audio system, offering clearer, unaltered sound. It uses high-density polyethylene dielectric and Oxygen-Free Copper for superior audio quality, setting it apart from common PVC-insulated cables. Its pearl-white finish adds a touch of elegance.
-
Atlas Cables
Atlas Hyper 5.0 Achromatic OFC Links (Bi Wire Jumpers)SKU: Atlas Hyper Achromatic OFC Links
From£146.25Ex. VATThe Atlas Hyper Achromatic OFC Links are a set of four Oxygen Free Copper bi-wire jumpers that replace the brass links fitted to bi-wirable loudspeakers. Terminated with Atlas Achromatic Z-plugs or spades, they let a single run of Atlas Hyper speaker cable drive both pairs of terminals through cable from the same family, rather than through a basic metal plate.