FAQ Search Results
478 matching answers · Updated regularly by our specialist team
Start with power (cables & distribution), then upgrade signal cabling, support (Hi-Fi Racks) and isolation accessories. These incremental changes can unlock more from your existing gear. Once you have the basic essentials, then you can look at further upgrades, such as fuses, cartridges, better isolation and more!
These devices allow one or multiple HDMI sources to feed multiple displays. A splitter duplicates the signal, while a matrix switch lets you send different inputs to different screens.
For distances over 10m, use active HDMI, HDBaseT extenders, or fibre HDMI cables. These maintain 4K/8K signal quality without loss.
HDBaseT sends HDMI, Ethernet, control, and power over a single CAT cable up to 100m, ideal for distributed systems and home cinema installations.
Passive devices simply split signals, while active ones boost and equalise them to prevent degradation. Active systems are essential for long runs or multiple outputs.
Use an EDID manager or compatible distribution amplifier. This ensures all connected devices communicate correctly and avoid handshake issues.
The shelves for the Evoque Eco 60-40 SE2 are 40mm thick , and the base feet are 75mm
The Chord Odyssey 2 and Odyssey 4 (bi-wire) used soldered plugs as standard. Today's Chord cables' Ohmic plugs are crimped to the conductors. Currently, most Chord cables are offered with 'Gold-Plated' banana or spade; these connectors are still soldered, but a less common choice than Ohmic plugs or Elite Referance plugs.
In order to connect the MacBook Air to an HDMI port on your TV you will need to buy Apples` USB-C Digital AV Multiport Adapter , which plugs into one of the Thunderbolt 4/USB-C ports . You can then connect an HDMI cable to the adapter to connect to your TV - we have a wide variety of HDMI cables available for that purpose
The Aperta Subwoofer carpet spikes are sold in sets of four. Occasionally, suppliers may have spares available but singles are not currently in the catalogue.
The Powerquest 2 is fitted with a 2M power cable
Yes, Cat6a cable fully supports Power over Ethernet (PoE) and is even recommended for modern, high-power PoE installations
PLiXiR Power Conditioners do not come with a power cable. You can use most good-quality IEC C13 or C15 cables to benefit from the performance.
You could consider popular cables such as:
Nordost Purple Flare
https://www.futureshop.co.uk/nordost-odin-2-uk-mains-power-cable-with-qsa-silver-fuse-1
Best when used with source components.
Nordost Blue Heaven
https://www.futureshop.co.uk/nordost-purple-flare-3-figure-8-uk-mains-power-cable-1
Better when used with higher current components such as amplifiers or subwoofers
This item is specifically designed for correcting lip-sync issues. Its frequency response is ±0.5 dB 20Hz~20KHz. Its input level is 2Vrms and output level 2.0Vrms±0.2.
They may work for that purpose. However, that's not what they are designed for. You may be interested in the IsoAcoustic GAIA Series Threaded Isolation Feet: https://www.futureshop.co.uk/isoacoustics-gaia-series-threaded-isolation-feet
If you scroll down to the description section of the product page for the GAIA feet, you will find the 'IsoAcoustics Product Selector', where you can select the make and model of your speakers to find out the recommended GAIA feet for your speakers.