Audio Extenders
Shop by Brand
-
£85.82Ex. VATIt can extend Component or RGBHV signals through CAT-5 Cables up to a distance of 100m - will require a receiver unit (CA-COMP50R or CA-COMP100R). Product Code - CA-COMP-AT. -
£114.99Ex. VATCA-COMP100R can receive Component or RGBHV signals through CAT-5 Cables up to a distance of 100m - will require a transmitter unit (CA-COMPAT). Product Code - CA-COMP-100R.
-
£146.66Ex. VATThe PU-304-KIT is designed to send digital audio signals over 150m over CAT5e/6 cable infrastructure. Product Code - PU-304-KIT.
-
CYP
CYP PU-305BDA-TX Bi-Directional Analogue Audio over Single CAT TransmitterSKU: CYP PU-305BDA-TX
£134.16Ex. VATThe PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. Product Code - PU-305BDA-TX. -
£134.16Ex. VATThe PU-305BDA-RX is an analogue Stereo over CAT5e/6/7 Receiver which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. Product Code - PU-305BDA-RX. -
Atlona HD Distribution
Atlona AT-UHD-EX-70-KIT 4K/UHD HDMI over HDBaseT Transmitter/Receiver KitSKU: AT-UHD-EX-70-KIT
£306.29Ex. VATPlease Note: This product is now discontinued so once our stock is gone, it's gone!!
The Atlona AT-UHD-EX-70-KIT is a 4K/UHD HDMI over HDBaseT transmitter/receiver kit for HDMI transmission up to 230 feet (70 meters) over category cable with Power over Ethernet capability.
£271.67Ex. VATPlease Note: This product is discontinued, once our stock has gone, it's gone!!
Atlona’s HDBaseT RSNET transmitter uses the advanced technology of HDBaseT combined with power over category cable (PoCc™) to extend signals to an unprecedented 328 feet (100 meters) over a single category cable.
£290.82Ex. VATThe CYP AU-DTI4-TX is a four channel analogue audio to Dante transmitter that converts balanced mono inputs into networked digital audio for distribution over standard Ethernet. High quality analogue to digital conversion, adjustable pre-gain and switchable phantom power make it ideal for sending microphone and line level sources around large installations with very low latency. Powered entirely over PoE, it integrates cleanly into any Dante audio network and removes the need for heavy multi-core analogue cabling.
£290.82Ex. VATThe CYP AU-DTO4-RX is a Dante network audio receiver that converts a single Dante input into four channels of balanced mono analogue audio over four 3-pin Phoenix outputs. Featuring high quality DAC conversion with very low latency, AES67 compatibility and configurable volume and muting, it lets installers route uncompressed digital audio across standard Ethernet networks instead of running heavy multi-core analogue cabling. Powered directly by PoE to the IEEE 802.3af standard, it draws everything it needs from the network switch for flexible, single-cable installation.
£268.32Ex. VATThe CYP PU-305BDA-KIT is a bi-directional analogue audio extender kit that sends and receives stereo audio over a single Cat5e/6/7 cable at distances up to 300 metres. Each unit can both transmit and receive on RCA connectors, and RS-232 pass-through is carried alongside for device control. Power over CAT lets a single supply power either end, and the kit handles 96kHz 24-bit audio and is TAA certified.
NEW£526.93Ex. VATThe CYP AU-DTM1 is a Dante Euromodule wall plate combining a high-quality integrated microphone and a stereo line output in a single transceiver. It sends and receives audio simultaneously over standard Cat.5e/6/7 cable at distances up to 100 metres, with typical latency of around 1ms. Power comes from PoE over the same cable, and the unit is AES67 compatible for use in wider networked audio systems.Ask an Expert →Not finding what you need?Our experts can help narrow it down for your exact system.
