AV Extenders
HDMI and AV extenders over Cat6, HDBaseT, fibre and wireless, carrying video with audio, USB, IR and RS232 where required.
Shop by Brand
Getting a signal across a building
An extender sends HDMI further than a cable can reliably carry it, by converting the signal for transmission over structured cable or fibre and converting it back at the far end. It is a transmitter and receiver pair, and both ends have to match.
Choose the transport by distance and by what the building already has. HDBaseT over Cat6a covers most residential distances and carries control signals alongside the video, which saves running separate cable for IR or RS232. Fibre goes further and is immune to electrical interference, which suits long runs and noisy environments. Wireless solves rooms where no cable can be run, at the cost of latency and reliability compared with a wired link.
Two things to confirm before ordering: the resolution and refresh rate the extender supports at the distance you actually need, since ratings usually drop at longer runs, and whether the receiver is powered locally or over the cable. Cat cable quality matters more here than in a data network, and solid core Cat6a correctly terminated is the baseline. Tell us the distance and what has to travel with the video.
-
CYP
CYP SDV-C1H-TX – SDVoE Full 4K 10G AV over IP CAT-Based Small Form Factor ReceiverSKU: SDV-C1H-TX
£637.49Ex. VATThe CYP SDV-C1H-TX is a compact SDVoE transmitter that encodes and distributes 4K@60 4:4:4 video over 10G Ethernet with full HDR pass-through and HDCP 2.2 compliance. It supports Cat.6A cable runs up to 100 metres with PoE powering, making it well suited to professional AV-over-IP installations where source devices need to feed into a managed network. -
CYP
CYP SDV-F1H-RX SDVoE Full 4K 10G AV over IP Fiber Based Small Form Factor ReceiverSKU: SDV-F1H-RX
£664.99Ex. VATThe CYP SDV-F1H-RX is a small form factor SDVoE receiver that extends uncompressed 4K60 4:4:4 video, multi-channel audio and data over a single 10-Gigabit fibre link with minimum latency. Built around interchangeable SFP+ modules, it carries signals up to 300m as standard and up to 120km with an alternative module, while supporting HDMI 2.0, HDCP 2.2 and pass-through of HDR and 10-bit colour. Paired with the optional SDV-CS8 IP Master Controller, multiple units combine over standard 10G fibre switches to build matrix, multiviewer and video wall systems. -
CYP
CYP SDV-F1H-TX SDVoE Full 4K 10G AV over IP Fiber Based Small Form Factor ReceiverSKU: SDV-F1H-TX
£637.49Ex. VATThe CYP SDV-F1H-TX is a compact SDVoE AV over IP transmitter that sends uncompressed 4K@60 4:4:4 HDMI video, audio and data across a 10 Gigabit fiber network. With field-replaceable SFP+ modules it supports standard runs of 300m and distances up to 120km, while HDCP 2.2, HDR and multi-channel HD Bitstream passthrough preserve full source quality. Its small form factor and IP switchability make it ideal for matrix, multiviewer and video wall systems in large installations. -
CYP
CYP SDV-FTRX-BD SDVoE Full 4K 10G AV over IP Bi-directional Fiber Based Transceiver with USB ExtensionSKU: SDV-FTRX-BD
£1,109.16Ex. VATThe CYP SDV-FTRX-BD is an SDVoE full 4K 10G AV over IP bi-directional fibre transceiver that distributes uncompressed HDMI and DisplayPort signals at 4K60 4:4:4 across a network. Using an ultra-light, visually lossless compression scheme over multimode fibre, it carries video, multichannel audio, IR, RS-232, USB 2.0 and Ethernet up to 300m on a single link. It supports point-to-point KVM extension and, when paired with the optional SDV-CS8 controller, scales into a full distributed matrix with multiview and video wall capability. -
CYP
CYP PUV-1710L-AVLC-KIT – HDBaseT1 LITE Full 4K AVLC Series Transmitter & Receiver Kit with PoHSKU: CYP PUV-1710L-AVLC-KIT
£512.49Ex. VATThe CYP PUV-1710L-AVLC-KIT is an HDBaseT-Lite transmitter and receiver kit that extends 4K HDMI, audio, IR, RS-232 and power over a single Cat6a/7 cable. Using CYP's AVLC visually lossless compression, it delivers 4K@60 4:4:4 up to 35 metres or 4K@60 4:2:0 and 1080p up to 70 metres, with HDR and Dolby Vision support. The receiver is powered over HDBaseT, and the kit is HDCP 2.2 compliant and TAA certified. -
CYP
CYP PUV-1730PL-AVLC-KIT – HDBaseT1 LITE 4K AVLC Series Transmitter & Receiver Kit with OAR & PoHSKU: PUV-1730PL-AVLC-KIT
£620.82Ex. VATThe CYP PUV-1730PL-AVLC-KIT is an HDBaseT-Lite transmitter and receiver kit that extends 4K HDMI, audio, IR, RS-232 and power over a single Cat6a/7 cable, and adds Optical Audio Return (OAR) to send audio from the display back to the source. Using AVLC compression it delivers 4K@60 4:4:4 to 35 metres or 4K@60 4:2:0 and 1080p to 70 metres, with HDR and Dolby Vision. The receiver is PoH-powered and the kit is HDCP 2.2 compliant. -
CYP
CYP PUV-1810-AVLC-KIT – HDBaseT1 Full 4K AVLC Series Transmitter & Receiver Kit with LAN & PoHSKU: PUV-1810-AVLC-KIT
£626.66Ex. VATThe CYP PUV-1810-AVLC-KIT is a full HDBaseT transmitter and receiver kit that extends 4K HDMI, audio, IR, RS-232, Ethernet and power over a single Cat6a/7 cable. Using AVLC visually lossless compression, it delivers 4K@60 4:4:4 up to 70 metres and 4K@60 4:2:0 or 1080p up to 100 metres, with HDR and Dolby Vision. A built-in LAN port adds network connectivity at both ends, and the PoH-powered receiver makes for a clean, HDCP 2.2 compliant install. -
CYP
CYP PUV-2100-AVLC-KIT – HDBaseT2 Full 4K AVLC Series Kit with LAN, PoH & Audio/ARC PathwaySKU: PUV-2100-AVLC-KIT
£858.32Ex. VATThe CYP PUV-2100-AVLC-KIT is a HDBaseT 2.0 transmitter and receiver kit that extends 4K HDMI, audio, IR, RS-232, Ethernet and power over a single Cat6a/7 cable up to 100 metres. Using AVLC visually lossless compression, it carries 4K@60 4:4:4 with HDR and HDCP 2.2, and adds a selectable bi-directional optical ARC pathway so display audio can be returned to the source. The PoH-powered receiver makes for a clean, TAA-compliant install. -
CYP
CYP PUV-3050UA-KIT – HDBaseT3 Full 4K HDMI KIT with USB, PoH, Audio Pathway & HDMI bypassSKU: PUV-3050UA-KIT
£759.16Ex. VATThe CYP PUV-3050UA-KIT is a HDBaseT 3.0 transmitter and receiver kit that extends uncompressed 4K HDMI, USB 2.0, audio, IR and RS-232 over a single Cat6a/7 cable up to 40 metres. Unlike compressed extenders it carries native HDMI 2.0 4K@60 4:4:4 with HDR, and adds USB 2.0 extension for KVM and touchscreen control. It also features HDMI bypass and a bi-directional analogue audio pathway, with the PoH-powered receiver. -
£571.66Ex. VATThe CYP PUV-1230PL-KIT is an HDBaseT-Lite transmitter and receiver kit that extends 4K HDMI, audio, IR, RS-232 and power over a single Cat6a/7 cable up to 60 metres. It carries 4K UHD up to 4K@30 4:4:4 or 4K@60 4:2:0, with Optical Audio Return (OAR) and a separate analogue stereo audio output at the receiver for flexible audio routing. The receiver is powered over HDBaseT and the kit is HDCP 2.2 compliant and TAA certified. -
CYP
CYP PUV-1610-KIT – Standard HDBaseT1 KIT for the Reverse Power PUV-1600 SeriesSKU: PUV-1610-KIT
£647.49Ex. VATThe CYP PUV-1610-KIT is a standard HDBaseT transmitter and receiver kit that extends 4K HDMI, audio, IR, RS-232, Ethernet and power over a single Cat6a/7 cable up to 100 metres. Its defining feature is reverse power: the mains-powered receiver sends power back to the transmitter over the cable, adding flexibility when the source has no spare power. It carries 4K up to 4K@30 4:4:4 or 4K@60 4:2:0 and is HDCP 2.2 compliant. -
CYP
CYP PUV-2200PL-KIT – HDBaseT2 LITE Transmitter & Receiver Kit with USB, PoH & Audio PathwaySKU: PUV-2200PL-KIT
£676.66Ex. VATThe CYP PUV-2200PL-KIT is a HDBaseT 2.0 Lite transmitter and receiver kit that extends uncompressed 4K HDMI, USB 3.0, audio and control over a single Cat5e/6/7 cable up to 40 metres. It carries 4K@60 4:2:0 with multi-port USB 3.0 for peripherals, plus analogue audio in/out and a microphone input for flexible audio and conferencing. The receiver is powered over HDBaseT, and the kit is HDMI 2.0 and HDCP 2.2 compliant and TAA certified.
