System Isolation

Vibration control for speakers, components, turntables and cables from IsoAcoustics, Stillpoints and Townshend. One of the least glamorous upgrades and one of the most reliable.

145 products Award Winning Dealer Since 2013 Free expert consultation

The science of vibration control

Every component in a hi-fi system is affected by vibration from two directions at once. Airborne energy from the speakers reaches the equipment through the air and through the floor, and mechanical energy generated inside the equipment itself has to go somewhere.

Two approaches exist and they do different jobs. Isolation decouples a component from what it sits on, so vibration cannot travel between them. Coupling does the opposite, draining energy out of the component into a heavier structure. Speakers generally benefit from isolation from the floor, which breaks the room excitation loop and tightens bass. Turntables benefit most of all, since a stylus in a groove is a vibration sensor by design.

This is the category where the effect is most obvious to people who expected nothing. Putting isolation feet under a pair of standmount speakers changes the bass and the imaging in a way that is easy to demonstrate. Load ratings matter: the product has to be matched to the weight it carries or it will not work as designed. Tell us the component weights and we will specify the right size.

4.95/5 from 20,728+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

132 of 145 products

  • Blue Horizon

    Blue Horizon Bamboo Coupler Resonance Isolation Device

    SKU: BHA09

    £245.83
    Ex. VAT
    Introducing the Bamboo Coupler, a laminated bamboo block of chaotic construction for better resonance control. Place this block under electronic components for better sound and more optimised audio performance.
    View Available Worldwide Shipping Available
  • Blue Horizon

    Blue Horizon Spike Shoe Extreme - Set of 4

    SKU: BHA11

    £412.50
    Ex. VAT

    The Blue Horizon Spike Shoe Extreme is a high mass, multi resonance diffuser that transfers energy almost through minimal point contact. The primary purpose of the design is to channel all resonance energy in the most effective and direct way possible by utilizing the correct design philosophies combined with material usage.

    View Available Worldwide Shipping Available
  • Furutech

    Furutech NCF Booster Additional Cradles

    SKU: NCF Booster Cradles

    From
    £129.17
    Ex. VAT
    Furutech NCF Booster additional cradles expand the cable management and damping capabilities of the NCF Booster system, using NCF Nano Crystal Formula composite materials for static elimination and vibration control.
    View Available Worldwide Shipping Available
  • SVSound

    SVS SoundPath Subwoofer Isolation System

    SKU: SoundPath Sub

    From
    £57.50
    Ex. VAT
    The SVS SoundPath Subwoofer Isolation System uses precision-engineered elastomer feet to decouple a subwoofer from the floor, delivering tighter bass and measurably less room rattle. Available in 4-foot and 6-foot configurations.
    View Available Worldwide Shipping Available
  • IsoAcoustics

    IsoAcoustics GAIA M12 Vanity Cap (Sopra Cap) (Set of 4)

    SKU: 11001534

    £12.50
    Ex. VAT
    The IsoAcoustics M12 Vanity Cap (Sopra Cap) is a black ABS finishing cap for speakers with M12-1.25 threaded inserts exposed on the plinth or outriggers, such as the Focal Sopra N1 and N2. Set of 4.
    View Available Worldwide Shipping Available
  • IsoAcoustics GAIA Neo Cap with compression washer
    NEW

    IsoAcoustics

    IsoAcoustics GAIA Neo and GAIA-TITAN Neo Cap (Set of 4)

    SKU: IsoAcoustics GAIA Neo Cap (I / II / III Neo)

    £15.41
    Ex. VAT

    The IsoAcoustics GAIA Neo and GAIA-TITAN Neo Cap is a decorative and functional accessory for GAIA Neo and GAIA-TITAN Neo isolators, supplied four to a pack. It conceals the O-ring, compression washer and inlet that can remain visible after installation, and houses the compression washer internally so the isolator seats securely even where a speaker offers little contact area. Versions are available for the GAIA I Neo, II Neo and III Neo, plus GAIA-TITAN Cronos Neo and Theis-Rhea Neo caps in Black or Dark Chrome.

    View Available Worldwide Shipping Available
  • IsoAcoustics GAIA Neo Floor Sliders (I / II / III Neo)
    NEW

    IsoAcoustics

    IsoAcoustics GAIA Neo Floor Sliders (I / II / III Neo)

    SKU: IsoAcoustics GAIA Neo Floor Sliders (I / II / III Neo)

    £9.57
    Ex. VAT
    The IsoAcoustics GAIA Neo Floor Sliders are a set of eight floor protectors that sit under GAIA Neo isolators while repositioning heavy floorstanding speakers. Four solid sliders suit hard floors and four felt pads give smooth gliding, letting speakers move without scratching hardwood, tile or other delicate surfaces. They are removed once positioning is complete so the isolators couple directly to the floor.
    View Available Worldwide Shipping Available
  • IsoAcoustics GAIA Neo Borresen Adaptor
    NEW

    IsoAcoustics

    IsoAcoustics GAIA Neo Borresen Adaptor

    SKU: IsoAcoustics GAIA Neo Borreson Adaptor

    £29.17
    Ex. VAT
    The IsoAcoustics GAIA Neo Borresen Adapter is a purpose-built fitting kit that allows GAIA Neo isolators to be installed on compatible Borresen loudspeakers. It secures the isolator through the speaker's existing outrigger mounting point using the supplied M10-1.5 thread adapter together with the original Borresen foot cap. Each set contains four adapters and four thread adapters, enough for one loudspeaker.
    View Available Worldwide Shipping Available
  • Furutech NCF Booster-Brace Power Connector Damping Support
    NEW

    Furutech

    Furutech NCF Booster-Brace Power Connector Damping Support

    SKU: NCF Booster-Brace

    £137.50
    Ex. VAT
    The Furutech NCF Booster-Brace is a damping support for power plugs at US (NEMA) wall outlets and distribution blocks, using an NCF nylon resin body and aluminium housing to steady connectors and reduce static.
    View Available Worldwide Shipping Available
  • Furutech NCF Booster Shaft Bar Adjuster - Pack of 2
    NEW

    Furutech

    Furutech NCF Booster Shaft Bar Adjuster - Pack of 2

    SKU: NCF Shaft Bar Adjuster

    £41.67
    Ex. VAT

    The Furutech NCF Booster Shaft Bar Adjuster is a pair of nickel-plated brass height adjusters with NCF nylon bases that fine-tune NCF Booster and NCF Booster-Signal shaft bars by up to 7.0mm.

    View Available Worldwide Shipping Available
  • AudioQuest SorboGel Q Feet (Set of 4) Ex Demo
    NEW

    AudioQuest

    AudioQuest SorboGel Q Feet (Set of 4) Ex Demo

    SKU: SORBOQSET Ex Demo

    £86.63 £108.29
    Ex. VAT ✓ Save £21.66
    AudioQuest's Q-Feet can breathe new life into your system by damping unwanted vibrations, allowing the system to sing deeper and further into the music.
    View Available Worldwide Shipping Available
  • Oehlbach One for All - Pack of 4 Ex Demo
    NEW

    Oehlbach

    Oehlbach One for All - Pack of 4 Ex Demo

    SKU: 55135 Ex Demo

    £4.66 £5.82
    Ex. VAT ✓ Save £1.17
    Vibration damper for acoustically insulating smaller loudspeaker boxes.
    View Available Worldwide Shipping Available

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

When speakers sit directly on a surface, vibrations travel into the floor or stand and then reflect back into the speaker cabinet. This interference can blur detail, smear imaging, and muddy bass response. IsoAcoustics isolators decouple the speaker from its surface, preventing those reflections. The result is tighter, more controlled bass, cleaner midrange, and a wider, more natural soundstage. Isolation helps you hear the true performance of your speakers without unwanted distortion.

Yes. Isolation platforms prevent vibrations from floors and racks reaching your sensitive audio equipment. By reducing mechanical feedback, they allow your system to perform at its full potential, delivering cleaner detail, more stable imaging, and deeper, more controlled bass. Townshend’s Seismic Platforms are among the most effective solutions available.

Isolation shelves or decoupling features can help reduce resonance, particularly for turntables and valve equipment.

Isolation and support products can make a clearly audible difference, especially in resolving systems. Vibrations from floors, speakers, and even airborne sound can interfere with sensitive components like turntables, DACs, and amplifiers. Proper speaker stands help speakers perform as intended by improving stability, positioning, and bass control.

Hi-fi racks and isolation platforms reduce unwanted resonance, helping systems sound cleaner, more focused, and more consistent. While these products may not change the sound as dramatically as speakers or cartridges, they often unlock performance that is already there but being masked by vibration or poor placement.

Most forms of Isolation aim to reduce the amount of external (and internal) vibration affects your system, whether thats your speakers, turntable, amplifier etc. These vibrations may not seem noticeable to you, however, Hi-Fi equipment can be extremely sensitive and even micro-vibrations can introduce noise to your music. Two great examples are for Speakers and Turntables. If a speaker receives excess vibrations from an external source, this can affect the movement of the drivers and directly affect what you can hear. Similarly with Turntables, any excess vibrations can affect the movement of the cartridge which ultimately means a change in the musical information. All of these situations mean you won't be able to hear your system and your music as it was intended. Even some simple isolation for your most sensitive equipment can go a long way to improving your listening sessions, and the more isolation you introduce, the lower your overall noise floor can be.

Speaker isolation reduces vibration transfer between speakers and floors or furniture, improving clarity and bass control.

Yes. From compact bookshelf speakers to large floorstanders, most speakers benefit from proper isolation.

Loading...
Loading...
loader
Loading...