System Isolation
Vibration control for speakers, components, turntables and cables from IsoAcoustics, Stillpoints and Townshend. One of the least glamorous upgrades and one of the most reliable.
Shop by Brand
The science of vibration control
Every component in a hi-fi system is affected by vibration from two directions at once. Airborne energy from the speakers reaches the equipment through the air and through the floor, and mechanical energy generated inside the equipment itself has to go somewhere.
Two approaches exist and they do different jobs. Isolation decouples a component from what it sits on, so vibration cannot travel between them. Coupling does the opposite, draining energy out of the component into a heavier structure. Speakers generally benefit from isolation from the floor, which breaks the room excitation loop and tightens bass. Turntables benefit most of all, since a stylus in a groove is a vibration sensor by design.
This is the category where the effect is most obvious to people who expected nothing. Putting isolation feet under a pair of standmount speakers changes the bass and the imaging in a way that is easy to demonstrate. Load ratings matter: the product has to be matched to the weight it carries or it will not work as designed. Tell us the component weights and we will specify the right size.
-
From£57.50Ex. VATThe SVS SoundPath Subwoofer Isolation System uses precision-engineered elastomer feet to decouple a subwoofer from the floor, delivering tighter bass and measurably less room rattle. Available in 4-foot and 6-foot configurations.
-
£12.50Ex. VATThe IsoAcoustics M12 Vanity Cap (Sopra Cap) is a black ABS finishing cap for speakers with M12-1.25 threaded inserts exposed on the plinth or outriggers, such as the Focal Sopra N1 and N2. Set of 4.
-
IsoAcoustics
IsoAcoustics GAIA Neo and GAIA-TITAN Neo Cap (Set of 4)SKU: IsoAcoustics GAIA Neo Cap (I / II / III Neo)
£15.41Ex. VATThe IsoAcoustics GAIA Neo and GAIA-TITAN Neo Cap is a decorative and functional accessory for GAIA Neo and GAIA-TITAN Neo isolators, supplied four to a pack. It conceals the O-ring, compression washer and inlet that can remain visible after installation, and houses the compression washer internally so the isolator seats securely even where a speaker offers little contact area. Versions are available for the GAIA I Neo, II Neo and III Neo, plus GAIA-TITAN Cronos Neo and Theis-Rhea Neo caps in Black or Dark Chrome.
-
IsoAcoustics
IsoAcoustics GAIA Neo Floor Sliders (I / II / III Neo)SKU: IsoAcoustics GAIA Neo Floor Sliders (I / II / III Neo)
£9.57Ex. VATThe IsoAcoustics GAIA Neo Floor Sliders are a set of eight floor protectors that sit under GAIA Neo isolators while repositioning heavy floorstanding speakers. Four solid sliders suit hard floors and four felt pads give smooth gliding, letting speakers move without scratching hardwood, tile or other delicate surfaces. They are removed once positioning is complete so the isolators couple directly to the floor. -
£29.17Ex. VATThe IsoAcoustics GAIA Neo Borresen Adapter is a purpose-built fitting kit that allows GAIA Neo isolators to be installed on compatible Borresen loudspeakers. It secures the isolator through the speaker's existing outrigger mounting point using the supplied M10-1.5 thread adapter together with the original Borresen foot cap. Each set contains four adapters and four thread adapters, enough for one loudspeaker.
-
£137.50Ex. VATThe Furutech NCF Booster-Brace is a damping support for power plugs at US (NEMA) wall outlets and distribution blocks, using an NCF nylon resin body and aluminium housing to steady connectors and reduce static.
-
£41.67Ex. VAT
The Furutech NCF Booster Shaft Bar Adjuster is a pair of nickel-plated brass height adjusters with NCF nylon bases that fine-tune NCF Booster and NCF Booster-Signal shaft bars by up to 7.0mm.
-
£91.66Ex. VAT
One Atacama HRD-A Harmonic Resonance Device in aluminium: a support, 40mm wide and 50mm tall, that sits under a hi-fi component and gives the vibration inside it a direct path down into the rack. It takes up to 30kg and is adjusted with a quick-release key.
-
£133.32Ex. VAT
One Atacama HRD-B Harmonic Resonance Device in brass: a support, 40mm wide and 50mm tall, that sits under a hi-fi component and gives the vibration inside it a direct path down into the rack. It takes up to 40kg and is adjusted with a quick-release key.
-
£41.66Ex. VAT
A set of eight Atacama premium M8 (8mm) spikes in brass, mechanically tuned to help dissipate resonance in hi-fi racks and speaker stands with M8 fittings. Each spike is 33mm long with a 10mm thread and a 2mm curved tip.
-
Atacama
Atacama Premium High Load M8 Stainless Steel Spikes (Set of 8)SKU: Atacama Premium M8 Stainless Steel Spikes
£83.32Ex. VATA set of eight Atacama premium high load M8 (8mm) spikes in stainless steel, mechanically tuned for hi-fi racks and speaker stands. Each spike is 33mm long with a 10mm thread and takes up to 40kg.
-
£20.83Ex. VATThe IsoAcoustics GAIA Neo M8 Spacer lets GAIA I, II and III Neo isolators keep the factory upward tilt on selected Sonus faber floorstanders, with two black spacers, long M8-1.25 threads and compression washers.