Blocks & Conditioners
Distribution blocks, filtered conditioners and combined units in four to ten socket configurations, from Atlas, Chord, ISOL-8, IsoTek, PLiXiR, PS Audio, Shunyata and Synergistic Research.
Shop by Brand
Block or conditioner? The difference explained
A power block is a distribution point. It takes one feed from the wall and provides several sockets, using better internal wiring and connectors than a domestic extension lead, and it puts every component on a common earth reference. It does not filter.
A conditioner adds filtering, and sometimes surge protection, isolation transformers or full regeneration. The filtering removes high frequency mains noise, which typically lowers the noise floor and can improve stereo imaging. The trade off is that filtering in series with a power amplifier can restrict current on dynamic peaks and leave the system sounding flat.
The common arrangement solves both problems: filtered outlets for sources and digital equipment, and an unfiltered or high current outlet for the power amplifier. Many units are built exactly that way. Count the components you need to plug in, note which of them are amplifiers, and check the socket type your mains cables use. Tell us what the system is and we will recommend the configuration rather than the most expensive box.
-
From£2,395.83Ex. VATThe ISOL-8 SubStation F3 Axis is a full-size mains power conditioner with built-in DC blocking, combining ISOL-8's transmodal filtering with removal of DC offset from the mains supply. Six outlets, surge protection and pure copper internal conductors give premium components a cleaner, more stable supply, while the Axis DC blocking tackles the transformer hum that DC offset can cause. The SubStation F3 Axis is designed and hand built in England.
-
From£3,329.17Ex. VATThe ISOL-8 SubStation F5 is a full-size mains power conditioner designed to give premium hi-fi components a cleaner, more stable supply with plenty of current in reserve. Seven outlets, transmodal filtering, surge protection and rhodium plated pure copper connectors set it above the SubStation F3. The SubStation F5 is designed and hand built in England, and is also available as the F5 Axis with built-in DC blocking.
-
From£3,662.50Ex. VATThe ISOL-8 SubStation F5 Axis is a full-size mains power conditioner with built-in DC blocking, combining ISOL-8's transmodal filtering with removal of DC offset from the mains supply. Seven outlets, surge protection and rhodium plated pure copper connectors give premium components a cleaner, more stable supply, while the Axis DC blocking tackles the transformer hum that DC offset can cause. The SubStation F5 Axis is designed and hand built in England.
-
£229.17Ex. VAT
The Furutech Flow-8.1 NCF is an in-line AC power filter for components with a figure 8 (C7) mains inlet, such as CD players, streamers, DACs and network devices. It fits between your power cable and the component, filtering noise through Furutech's AC-1501(R) EMI filter (around 10dB at 1MHz and over 30dB at 10MHz), with Neo Damper and NCF vibration control and an FI-8.1N NCF(R) rhodium-plated figure 8 plug on a 60cm lead. Rated 10A at 250V.
-
Furutech
Furutech FT-SWS-D NCF Box High End Performance Duplex Schuko Power Distributor - RhodiumSKU: FT-SWS-D NCF R (BOX)
£618.33Ex. VATThe Furutech FT-SWS-D NCF Box is a freestanding duplex Schuko power distributor with two rhodium-plated NCF sockets, an FI-06 NCF IEC inlet and star-wired Alpha OCC wiring, built to feed two components with low noise.
-
£516.67Ex. VAT
The Furutech e-TP60E NCF is a six-outlet Schuko power distributor with rhodium-plated FI-E30 NCF sockets, an FI-06 NCF(R) IEC inlet and Formula GC-303 EMI absorption, upgrading the standard e-TP60e's gold-plated parts.
-
£7,604.17Ex. VAT
The Furutech NCF Power Vault-E is an eight-socket Schuko mains distributor with a machined aluminium chassis, rhodium-plated FI-E30 NCF(R) sockets, Alpha-OCC wiring and GC-303 noise absorption. Furutech make no UK-socket version.
-
Plixir
PLiXiR Elite BAC 150 Balanced Power Conditioner - Special Offer - Black November DealSKU: PLiXiR BAC 150 Special Offer
£663.29 £829.17Ex. VAT ✓ Save £165.88Using a custom-built transformer from Noratel, the Elite BAC 150 by PLiXiR cleans up your AC mains supply for electrically sensitive equipment to help your setup achieve greater clarity of sound.
-
Plixir
PLiXiR Elite BDC MK II Balanced Power Conditioner - Dual Output 5V/5A - Special Offer - Black November DealSKU: PLiXiR BDC MK II Dual 5V-5A Special Offer
£663.29 £829.17Ex. VAT ✓ Save £165.88The PLiXiR Elite BDC MKII is a high-performance linear power supply featuring enhanced capacitance, a lower noise floor, and improved dynamics. With a simplified 1 or 2-output design, it’s optimized for sound purity and system synergy. Built in Singapore with premium parts and a rigid aluminum body, this power supply delivers exceptional audio clarity and stability. -
From£829.17Ex. VATThe IsoTek Alpha Lite is a 1U rack-width, 8-way power line cleaner for custom installation, with independently cleaned IEC outlets, 45dB RFI reduction, 40,000A surge protection and up to 2,300W of clean power.
-
From£1,662.50Ex. VATThe IsoTek Delta Lite is a 2U rack-width, 16-way power line cleaner for custom installation, with sixteen independently filtered IEC outlets, 45dB RFI reduction and 54,000A surge protection, delivering up to 3,680W (16A/230V) of clean power from a single 16A IEC C20 inlet.