Blocks & Conditioners

Distribution blocks, filtered conditioners and combined units in four to ten socket configurations, from Atlas, Chord, ISOL-8, IsoTek, PLiXiR, PS Audio, Shunyata and Synergistic Research.

134 products Award Winning Dealer Since 2013 Free expert consultation

Block or conditioner? The difference explained

A power block is a distribution point. It takes one feed from the wall and provides several sockets, using better internal wiring and connectors than a domestic extension lead, and it puts every component on a common earth reference. It does not filter.

A conditioner adds filtering, and sometimes surge protection, isolation transformers or full regeneration. The filtering removes high frequency mains noise, which typically lowers the noise floor and can improve stereo imaging. The trade off is that filtering in series with a power amplifier can restrict current on dynamic peaks and leave the system sounding flat.

The common arrangement solves both problems: filtered outlets for sources and digital equipment, and an unfiltered or high current outlet for the power amplifier. Many units are built exactly that way. Count the components you need to plug in, note which of them are amplifiers, and check the socket type your mains cables use. Tell us what the system is and we will recommend the configuration rather than the most expensive box.

4.95/5 from 20,731+ reviews Award Winning Dealer Since 2013 UK Specialist since 2005

24 of 134 products

  • Wireworld

    Wireworld Matrix EU 6 Way Power Hub v2

    SKU: MATRIXEU-2

    (5 reviews)
    £141.95
    Inc. VAT
    The Matrix v2 is a multi-way power distribution block which is particularly useful for home theatre installations where there are never enough power outputs.
    View Available Free delivery
  • iFi Audio

    iFi Audio DC Blocker - Transformer Hum Eliminator

    SKU: P003279

    (5 reviews)
    £129.00
    Inc. VAT

    If one of your audio components suffers from an irritating transformer hum, then the DC Blocker is the perfect product for you. By intelligently blocking DC voltage greater than 1,000mV (the main cause of humming), the DC Blocker can eliminate the transformer hum in your equipment. The DC Blocker manages this while maintaining equipment safety and EMI shielding to ensure there are no negative side effects. Additionally, the DC Blocker can be used anywhere around the world!

    View Available Free delivery
  • iFi Audio

    iFi Audio GND Defender - Ground Loop Eliminator

    SKU: P003281

    (5 reviews)
    £99.00
    Inc. VAT

    If you can hear a consistent hum coming through your speakers, whether playing music or when idle, then you may have multiple ground/earth connections in your system causing a ground loop. This ground loop can be fiddly to fix, however, iFi have come along with an intelligent solution to help solve this issue. Enter the GND Defender! By using a specially designed AI Ground Detection, the GND Defender can automatically disconnect the ground on your device if there is a ground loop, eliminating the low hum through your speakers. But it does not stop there, the GND Defender can even reinstate the ground connection to pass current if any faults are detected in your system. This ensures a safety fallback to help protect your equipment.

    View Available Free delivery
  • Chord PowerHAUS S6 UK Mains Distribution Block
    SALE

    Chord Company

    Chord PowerHAUS S6 UK Mains Distribution Block

    SKU: POW0001.001.1

    (5 reviews)
    £1,260.00 £1,400.00
    Inc. VAT ✓ Save £140.00

    The Chord Company PowerHAUS mains block is the distillation of decades working with signal and power transfer and benefits from a unique version of their acclaimed ARAY technology (MainsARAY) which has been specially adapted for power distribution. Virtually every component utilised inside the PowerHAUS is uncompromising and has been manufactured specifically for its intended purpose. Accordingly, both M6 and S6 models are non-switched and avoid filters and neon power indicators which can generate noise and reduce quality. Their solid aluminium construction minimises the unwanted effects of microphony, too.

    View Available Free delivery
  • ISOL-8

    ISOL-8 PowerLine Ultra Mains Block

    SKU: ISOL-8 PowerLine Ultra

    (4 reviews)
    £850.00
    Inc. VAT
    The PowerLine Ultra is fully power conditioned and optimised for audio. One Direct Connection outlet is provided, filtered by a high current shunt filter, and is suitable for loads such as amplifiers.
    View Available Free delivery
  • IsoTek EVO3 Syncro Uni DC Blocker
    SALE

    IsoTek

    IsoTek EVO3 Syncro Uni DC Blocker

    SKU: EVO3 Syncro Uni

    (4 reviews)
    From
    £499.00 £595.00
    Inc. VAT ✓ Save £96.00
    Syncro Uni incorporates unique DC-cancelling electronics that rebalance the mains sine wave to dramatically reduce/silence transformer hum. This sophisticated product can be used independently for a single component, or in combination with another IsoTek power cleaner as an upgrade and to deliver a fully rebalanced sine wave across all output sockets.
    View Available Free delivery
  • iFi Audio

    iFi Audio Power Station Mains Distribution Block with Active Noise Cancellation

    SKU: P003278

    (3 reviews)
    £624.17
    Ex. VAT

    The Power Station is the latest addition to iFi’s collection of performance-enhancing audio essentials – a six/eight-way mains block (depending on region) that ensures any audio or AV system is supplied with clean, consistent electricity to unleash its full potential.

    View Available Worldwide Shipping Available
  • IsoTek

    Isotek V5 Aquarius Mains Conditioner W/ Premier Power Cable

    SKU: Isotek V5 Aquarius

    (3 reviews)
    From
    £2,995.00
    Inc. VAT
    The new V5 Aquarius mains conditioner by Isotek is an upgrade on the EVO3 model, and features six outlets, with two of these dedicated to high-current equipment like power amplifiers or subwoofers. Each outlet benefits from its own isolated circuitry, effectively making this unit six conditioners in one!
    View Available Free delivery
  • QSA

    Quantum Science Audio (QSA) IEC Jitter - Yellow

    SKU: QSA IEC J - Y

    (3 reviews)
    £130.00
    Ex. VAT

    QSA proudly announce the newest product in their range of jitters that aim to reduce 'Bottleneck Distortion' - the IEC Jitters. The Yellow Standard Jitter offers a wide sound stage that allows listeners to experience the full range of sound from their music. The integration of instruments and vocals is seamless, creating a cohesive and balanced soundscape.

    View Available Worldwide Shipping Available
  • QSA

    Quantum Science Audio (QSA) IEC Jitter - Org-Yellow

    SKU: QSA IEC J - Org-Y

    (3 reviews)
    £210.00
    Ex. VAT

    QSA proudly announce the newest product in their range of jitters that aim to reduce 'Bottleneck Distortion' - the IEC Jitters. Organic-Yellow Jitters offer a wide variety of benefits for audio enthusiasts. With its accurate timing, wider sound stage, and greater audio presence, this Organic-Yellow Jitters provide an enhanced audio experience.

    View Available Worldwide Shipping Available
  • Chord Company

    Chord PowerHAUS P6 UK Mains Distribution Block

    SKU: POW0007.001.1

    (3 reviews)
    £700.00
    Inc. VAT

    The PowerHAUS P6 boasts a sleek and sophisticated design, utilising Chord Company's expertise in wiring design, engineering, and manufacturing techniques. Its purpose is to reduce noise and enhance performance, making it an essential upgrade for any audio system.

    View Available Free delivery
  • ISOL-8 PowerLine Axis 5 Way Mains Block
    SALE

    ISOL-8

    ISOL-8 PowerLine Axis 5 Way Mains Block

    SKU: ISOL-8 PowerLine Axis

    (2 reviews)
    £679.99 £900.00
    Inc. VAT ✓ Save £220.01
    The PowerLine Axis provides an innovative cure to the problem of DC on the mains supply. In theory the mains waveform should be pure AC: a perfect, symmetrical sine wave.
    View Available Free delivery

Not finding what you need?
Our experts can help narrow it down for your exact system.
Ask an Expert →

IsoTek power conditioners remove noise and interference from your mains supply while providing surge protection for your system. This ensures your hi-fi or AV equipment receives clean, stable power, improving dynamics, detail, and overall performance.

IsoTek uses advanced passive components and proprietary design techniques to filter out mains interference and isolate components from electrical “cross‑talk.” This results in a cleaner, more stable supply, reducing noise, tightening dynamics, and delivering greater clarity and musical detail.

PLiXiR uses balanced power technology to reduce common-mode noise and ground loop issues at the source. This results in a more natural sound, a quieter background, and improved dynamics compared to standard conditioners.

Yes. Larger models such as the Elite BAC 1500 and above are built to handle integrated and power amplifiers, ensuring stable current delivery without limiting dynamics or musical expression.

Unlike many conditioners that restrict current, Shunyata’s distributors deliver clean power without limiting dynamics. Technologies developed for the Venom, Hydra, Denali, and Everest ranges ensure lower noise floors, blacker backgrounds, and more natural sound, benefits that audiophiles and professionals alike can hear instantly.

Unlike traditional power conditioners that only filter noise, PS Audio mains regenerators rebuild the AC waveform entirely. This gives your system a supply of clean, consistent power, free from voltage dips or distortion, resulting in improved dynamics and detail.

The Stellar Power Plant 3 is ideal for smaller systems or dedicated front-end components such as DACs, preamps, and streamers. It provides the same clean regenerated power found in larger models but in a more compact and affordable form.

A power block is the simplest solution. It distributes mains power safely to multiple components, often with improved internal wiring and better mechanical stability than standard extension leads.

A power conditioner goes further by filtering electrical noise and interference present on the mains supply. This can lower the noise floor and help systems sound cleaner and more controlled, especially in electrically noisy homes.

A power regenerator actively rebuilds the incoming mains supply into a new, stable waveform before feeding your system. Regenerators are typically used in higher-resolution systems where maximum consistency, stability, and noise reduction are required.

This depends on the components being powered and the levels of noise within your local mains connections. There is equipment available to measure the noise in your mains, however, one of the easiest ways is to try a power conditioner for your source components and hear if there is any difference during your listening. If there is minimal to no difference, then a good quality power block may be your best option.

Loading...
Loading...
loader
Loading...